Im getting my car buttoned back up for boost season but ran into something I haven't been able to figure out.While performing a pre drive walk around, I witnessed my tail lights fade away until the point where they were completely off and inoperable, then noticed my cluster was out as well...
Hello all, I need a little assistance in troubleshooting my GST.The car is pretty much fully built, has been running fine until the other night.I was going about 65mph on a highway in the night time and all of a sudden all of my electrical stopped working. I lost fuel pump power, fan...
My 97 gst has just been newly equipped with koni shocks on eibach pro kits. Here’s the twist, I have installed the rear subframe of a 3g V6 GTS. The measures are the same, the big focus is the larger rear sway bar, tubular control arms, and spherical bearing rear trailing arms. Well, the toe is...
64t evo viscous LSD for sale. it came out of a shop that was closing down, and i bought it thinking it could fit in a fwd, until i was unaware that the bolt pattern for the ring gear is different. it can be ran in an AWD, it just needs a few extra parts. from my understanding, you will need a...
i came across an evo III diff when a shop closed down a while back here in phx. a buddy was trying to install it into his 2g AWD (rear end i believe), but didnt work out... him and a local dsm expert said that it would fit in a 2g fwd, and act the same as a KAAZ LSD... i paid about $325 for the...
I found a set of G cams, they looked good, so we threw them in. ive searched for a profile on them, and havent found anything on G cams. yes, single letter, no numbers... G cams. are they evo 3 cams???
Wondering if anyone has tried this before? Trying to get an evo 8 starter to work on a 2g awd. Suppose if it hasn't been done, we will give it a shot at az speed center. If it doesn't work on an awd, we will try a fwd, possibly with 1g's as well. Unless someone has tried it already and it didn't...
can anyone tell me if they stopped making these? i was just about to purchase one and i couldnt find a link. i am in search of the evo cut long version for the GST. if anyone can point me in the right direction, i would greatly appreciate it.
Started to shave the fuel rail down because I wanted something a little different. Going to have an fittings welded in, then taking it to powdercoat. I'll update pics as I go along. if it all works out, I'll have them for sale soon. Let me know what you think so far. Oh, this is an oem 1g fuel...
did anyone score any good deals for black friday, or are planning on for cyber monday (2016)?i scored a deatschwerks DW300 fuel pump for my 2g for $134.91 at tunersports.com. normally the price is $169, pretty much anywhere you check. even better score for me was i had 35 bucks in my paypal...
just wondering if there is any difference from the 8/9 brembo brakes. i have my eyes on a rear set locally for less than $200. i want to get them, but dont want to go through the hassle of trying to sell them again if they dont fit. thanks!
ive used Engine Ice in multiple high power applications, with way more sensitive motors than the 4G63 (nickasil coated jugs, on high octane with high compression pistons), and have had OUTSTANDING RESULTS! there is no question in my mind that a Mishimoto X-Line radiator, with 2 flex-a-lite fans...
im looking for ideas on a new bumper support. im not worried about crashing the car, im worried about someone else crashing into me now days... with all the texting and driving going on! pics for ideas, thanks!
in a 2g fwd, what worked best to keep your fwd from torque steering, and wheel hopping down the pavement? ive heard an ELHS with a 6 bolt helps with an LSD... i will NEVER weld the diff. out of the question. i like to make u-turns. im keeping it a 7 bolt so the half shaft is out of the question...
My car doesn't require emmisions, so I've taken out all of the egr crap. Figured I won't need so much wiring in the harness. Along with that, I decided to cut the connector that runs to the factory amp... some say bad idea, some say it doesn't matter. Curious if anyone else has input or...
one thread seemed to have led most people who perform reseach on an lsd insert to not go in this direction. so the thing is that when i purchased my car, the previous owner said that the trans was an LSD trans from factory. its a 2g fwd, and i havent heard of many fwd's coming with an lsd option...
Was thinking about dropping my shifter about an inch from the base of the upper shaft. I heard of people placing them at a different degree as well. Anyone have feedback on this?
Are there any poly front subframe bushings available? I see torque solutions has a rear set available, I see there is numerous aluminum inserts available. I also saw a thread that had oem part numbers. I saw a 1g set available, and was wondering if there isn't a 2g set available if the 1g set...
Does anyone know if they make these still? My car is a non abs, so I have the proportion valve already. I am going to install a 3G brake booster (and eventually brembo) but definitely scrapped the trashy hardlines already (I kept rear hard lines). I talked to someone at stm, and they said they...
working on my GST at the moment, running a 7bolt with an evo3 turbo. airflow is going to be good with a punishment fmic, evo3 intake manifold, FP exhaust, evo3 o2 housing, and 3" piping all the way back. i have an FP 18psi wastegate actuator, tuning it solid at 18psi. i was wondering, what i am...
hey all, trying to get off the probation on this site... im about to get my engine bay soda blasted this week, and its time to start painting the bay, since my motor is completely built ready to be dropped in! anyone have shots of their engine bays cleaned up and painted prior to dropping the...
Car is going to be hitting around 400 on an LSD fwd setup, koni shocks on sportlines, and I am using evo 8 Enkei 17". The car is going to be a daily, but want to do some runs every now and then. What tires are going to benefit me in the Phoenix streets? Thanks.
hey all, still on the probationary thing... got a question for you all, anyone have any other type of steering wheels other than OEM, 3g, or evo steering wheels? aside from the quick release, which i know the possibilities are endless on that. i did a little research before on this site, someone...
hey guys, working my way through the pain of getting off this probationary member, figured i would see if i could get some input on purchasing used parts. i guess it all depends on the seller, and description... but more so i would want to ask this from a tuners point of view. my tuner seems to...
i am currently in the process of assembling my motor, and i chose to go with an evo 3 intake manifold. we are planning on stashing my coil pack up around the (3g) brake booster, so i dont need any tabs on the I.M. im not sure if this has been done, but i would imagine it has since everyone here...
my car didnt come with ABS, so i was thinking about dropping my power steering resi down to the same area where the ABS would have been. anyone see this done before? oh also, im not new to the dsm game i am just trying to get this stupind probationary member taken off becuase i have a ton of...
whats up guys i have been in the process of restoring my 97 GST, and it has been a slow but positive process. during the upgrade path, i changed my mind like 500 times... and i first off would like to give a shout out to AZ Speed Center for having tons of patience with me. my car will be N8TUNED...