@awdmonster1904 glad I can help bro.

Up for sale is a new lower mishimoto radiator hose for a 1g. I bought this a year and go and it didn't work for what I was trying to do. Asking 40 OBO

looks like you might have a bad catalytic converter.

Can u post some pictures of the wiring. Maybe adding an external relay may solve your problems temporarily.

I had a similar issue with my 2g. I lost the signal from the MFI relay to my fuel pump. When I would crank car would turn on nor the fuel pump. I ended up grounding the fuel pump wire and it worked. I think you have a wiring issue. If the car turns on with starting fluid, then your signal is...

sounds like you might have a MPI issue.Check this thread below.https://www.dsmtuners.com/threads/1g-basic-ecu-mpi-circuit-function.435961/

Injectors and exhaust manifold sold

Hello Fellow DSMers,Up for sale are my FIC 1150cc injectors, I upgraded to some FIC 2150cc and no longer need the injectors. Open to offers.I have a Zeiteonix widebanx complete that I removed from my car. No longer needed since I'm going a different route. Asking for $320 obo.Turbonetics...

@iugrad92turbo that is what I used to install the CAS. Im starting to think that maybe one of my fuel pumps went bad

I recently had my 95 GSX (7 bolt) turn off on and not want to turn on. I thought my settings were rested since I leave the battery unplugged. Called my tuner and had me do a live date stream as we noticed there was not RPM signal. He mentioned to me that I might have a defective Crank Position...

I am selling my current turbo setup. It is a turbonetics to4b along with my exhaust manifold external wastegate, tial wastegate w/ dump tube and the 3" down pipe that goes with it. Asking 500 and ill cover some shipping cost.

Selling the radiator brackets of my 96 GSX. Asking for 15 shipped.

It's hard to find someone that welds aluminum. I will add a coupler like you suggested. Do you think I will have performance issues if the intercooler piping from the throttle body is 3" and the on that goes to the turbo is 2.5"

Hello Dsm World,I'm in need of guidance. I'm currently finishing my 2.3L stoker and I am having issues with my intercooler piping. I currently have a VSRF FMIC. my set up consist of a s90 70mm throttle body and a forward facing exhaust manifold with a 6466 Precision turbo. The current piping I...

Here is a picture.

I want to thank all of guys for your opinions. I ended up using a 1g radiator. Gave me the clearance I needed. Sorry for the late reply, I have been back and forth with this car. I will keep you guys updated.

I am having an issue with my upper radiator hose clearance. I have forward facing exhaust manifold with a 6466 precision turbo and want some ideas on what to do.This can will won't be my daily driver, but I want to drive it work here and there. I live in CA, weather is weird. Sometime is hot...

I was looking into that option as well, but honestly i wouldn't even know how to begin. Unless some can make one and I can have someone weld it on.

Thanks brotha, I will purchase it today.

Hi Dsm world,I'm in the process of installing a top mount T3 manifold on my Gsx, but I ran into a little problem. The lower part of the manifold is hitting the top side motor mount located on the crossmember.Has anyone come across this issue, and if so what did you guys do. I found a custom...

Phardo submitted a new DSM Profile :2.3L Stroker GSX - Under ConstructionRead more about this vehicle here...

I have to unfortunately sale my dsm project due to me not having the funds needed to finish the car. I have literally everything needed to turn, only thing missing is an external oil cooler and a boost gauge. I am open to offers, will not part out.Engine 2.3L Stroker Arias pistons .020, Eagle...

I have a 5 speed transmission 125k miles, rear differential and front center diff for sale. Open to offers.I have 3 throttle bodies available. 1 is ported by Curt Brown Racing.I have a 2 intake manifolds.1 power steering pump complete with resivour.Starter, alternator, MAFThank you

Hi everyone,Looking to sale my 2.3L stroker kit. It has 0 miles. Decided to go another route. Kit includes Manley stroker crankshaft, eagle rods and arias pistons. ACL main and rods bearings included also. I spent roughly 1700 on parts not including labor. Looking for a reasonable offer...

I'm selling my 7 bolt Weapon R intake manifold. I bought it off a fellow dsmtuner, but I never got to using it. Decided to go with a Magnus manifold. I'm asking 220 obo shipped too you I paid 300. 70mm bore on the throttle body side. Plz text me at 3108900723 for a faster response.

Mainly because of the looks. I seen a gst hanger with a 8an and 6an fittings. I thought it would be easy to modify but since the gsx hanger is so narrow it through me off.

Sorry for the confusion,I am doing a -8 feed and -6an return line. I was inquiring to see how would I do the -6an return?

Here is my setup

Hi DSM World,I'm in the process of upgrading my fuel feed and return hose. I upgraded my fuel feed with an -8an fitting with no issue. I want to do the -6an fuel return fitting if possible. My question is, can i go the -6an fitting with slight modifications?Any help will be gladly appreciated.

Here is what I have done so far. All i am missing is the 8an forged fitting on top so I can have enough clearance.

Of course bro. I will post pics

You are the man bro

Hello dsmworld,I want to upgrade my fuel feed line to 8an fitting. How do I do about doing this. I read about doing a bulkhead fitting, but I'm not clear on which one to get or how to do it. Any help will be appreciated.Thank you

Sold

Thank you.

Hi everyone,I am currently working on a 2.3L 7 bolt stroker motor. I have elected to go with the PTE Jb 6266 turbo. I have Arias pistons with eagles H beam rods. Hoping to push close too 700hp and need help with choosing the correct injector size. I plan to use e85 here and there.Please...

No I did not, I'm actually on my way right now to pick up the pistons and see what the issue is. I will keep you guys updated

That's what the machine guy was telling. I called realstreetperformance and theu informed me it does have clips. So I'm not sure what to do. It' past my 30 days to return the pistons, so either I get a whole new set of pistons or get rides with smaller pin diameter

I appreciate all the help guys. Thanks alot Big help with that part number brotha

I will pick up the arias box and search around if there are locks included. I think my machinist is just overlooking something

It looks like it has a bushing. The only thing I received was the rods nothing else. I'm assuming the lock pins should've came im the arias box?

So it's not your tradition outside lock pin? Sorry I am a little slow with this

22mm pin wrist