jmonterful submitted a new DSM Profile :96 TSI AWDRead more about this vehicle here...

The color its good. Its just too watery my tuner said that was normal on e-85 how true is that? I am going to do an oil change this weekend.

This turned out to be my problem! I found the honeycomb for the maf inside the filter. Thanks for the suggestions guys. Now i think i got a bigger problem lol i was checking my engine oil and i noticed it was too watery i think water is micing with the oil. Most probable cause on that?

jmonterful updated GI 95 DSMView updates to this DSM profile...

jmonterful updated GI 95 DSMView updates to this DSM profile...

I dint wanna go wot! i had a hard time just driving 1 and 2nd gear it would cut off and respond again i noticed my wideband was reading really rich wich would explain why it was bogging. Indeed i think it is a mechanical problem, what i dont understand its why it keeps going back to this. I had...

1). Any boost, vac, or exhaust leaks? Boost leak tested 5psi above your max boost with no leaks?... No leaks at all2). Verified mechanical timing? yes3). Verified base timing?yes4). Ignition system COP or Stock Coil:stock Wire brand and Age: NGK, 5 months Spark Plug brand, type and Gap...

Ohh sorry. im just really new to this tuning stuff idk the terms correctly but yeah as he said the value logged in the link is different from what my wideband gauge says. Ik it could be a little off but the problems is they're like opposite. While my wideband gauge says im running okay, the log...

Okay i did everything i needed to do before tuning i checked leaks, timing etc. I started to tune my car im really new at this and the problem i have is my aem uego wideband numbers are not matching with my link its ecmlink v3 btw. Seems like the wideband is right and link is not because the car...

You're dang right!

I like learning and doing stuff myself but im not really into doing it myself or atleast for the first time but i'll take a better look once i get home. But thank you it'll be helpful to give me an idea of what its like!

I msgd himThanks i msgd him i'll wait to hear back. Would you say he has alot of experience doing that?

Do you know if dacowgod is still doing that? Seems like a nice idea but how does remote tuning work? They send you a set up and you just do what they tell you to put? I dont get it very well haha thank you for the input

Hello guys, first off i got my dsmlink a while ago and i would like to start tuning the car. the problem is that im not really familiar with tuning lol. i called some shops 3d motorsports and sublime auto and they either dont street tune or they only work with aem. Im a little broke to take it...

jmonterful updated GI's 95 dsmView updates to this DSM profile...

jmonterful updated GI's 95 dsmView updates to this DSM profile...

Yeah i can see that but i dont wanna push it further and break it idk should it be flush with the socket? & when i turn on the car the clicking comes and goes! And i tried driving the clicking got worse and it leans out to the point you can barely accelerate but i talked to the guy who i bought...

Thank you for your info!

I just got it today the guy told me it worked perfectly i just hear a clicking noise but i doesnt seem to affect it iddles good and everything but is the chip supposed to be lifted a little or is it okay like that?

What would that mean?

Ik this might be a dumb question but is my chip supposed to go all the way down i dont wanna break the thing lol! i have clicking noise when i turn on the car comes from my ecu i dont see anything burned so ig i would just ask. sorry my first time gitting link thank you

I had a really hard time trying to find a jackshaft! It took 10 days for my order to process and barely friday they shipped it i ended up just ordering the seals

Just so i'm not confused is this set up right? So i can leave it like that. Thanks

Thanks man i wasnt able to find a pic like that lol appreciate it:)

No, Number one is actually the 2nd one from right to left. i put the red one cause the blue one touched the timing belt and ate it

This bpr is a bleeder type from what i know. it has another "T" that has to go with it its different cause this one doesnt have a nipple across the screw it has it on the side. Thanks!

Oh okay i just wanted to make sure because they dont look the same as the lenght of my old ones and look at #1 it has to go over the oil cap so it can reach thats why my question. Btw would it even matter if the cables are put on different spots or is the lenght change so they can reach the...

Car is running better now it just doesnt want to hit boost anymore. It builds it and the bov sounds but u wont feel anything. I'll try looking at it tonight at someone's shop i'll keep you guys updated. Thanks for the posts

I appreciate your response man. It was really late at night so i couldnt take any pics i'll show you what i'm talking about. Under the cooils it shows some numbers so i put the cables mayching those numbers but they dont seem like they belong there or unless i'm not putting them in the right...

Okay i've been doing research for about a week but i cant seem to find a good answer i have a 95 talon tsi and i just bought some ngk wires but i'm not sure if i'm putting them right. The coils are numbered 3-2-1-4 (right to left) do this numbers correspond to the numbers on the wires if so the...

Thank you!

Idot have any tuning devide i have yet to buy dsmlink

jmonterful updated GI's 95 dsmView updates to this DSM profile...

Okay my car is running lean due to having a 20g turbo and no fuel mods. I'm saving up to buy them pretty soon in the meanwhile i wanna throw some 650 injectors i have there. my question is will it help it run a little better or would it not make a difference since it squirts what the computer...

Is there a difference in fwd and awd?

Would anyone give me info about this ecu? Will it work with dsmlink? Thank you

jmonterful updated GI's 95 dsmView updates to this DSM profile...

jmonterful submitted a new DSM Profile :GI's 95 dsmRead more about this vehicle here...

Fi appreciate the info guys i thought it was the other way around. Lol i think i'm gonna do some maintenance first as the first guys said thwn i'm gonna do a boost leak test. And then i'll upgrade the fuel system. I'll stop the car for around 2 3 months cause i need to go to cali but once i come...

Okay so i posted a while ago that i had a 20g with all stock fuel and when i was hitting boost it will cut and start failing also the motor would start to shake alot more we all thought i was getting fuel cut. After that i cleaned my spark plugs that were black and the car started working a...

Okay, so most probably from all this must be the fuel cut i'll look into fixing that. But how could you explain the car was running okay earlier what you guys think happened?

Everything fuel is stock am planing on upgrading the fuel i got bigger injectors but i wanna wait until to put it on until i got money to tune it and buy ecmlink to do it all at once. I had a problem with it cutting at really high boost but now is anywhere i hit boost & yeah my bad the needle...

As my tittle says once i hit boost my rpm gauge starts going crazy up and down can it be a boost leak? Running rich? What you guys think i think it might have something to do with the gas because one time i started to run out of it cause my gas gauge didnt work and started doing something...

Forgot to post back. I thought i checked all the fuses but turns it was the alt. Choke fuse. Thanks guys!

Thats why i'm doing research before messing up. Why would i f*** it up and then ask questions? I think this is the purpose of this forum isnt it? I get there is people with lots more knowladge in here and might get frustrated with this kind of questions but there are some that want to learn or...

Thank you appreciate it!!!

Thanks alot for your positive response! So the crank you would say its okay? & i wanted to start ordering parts to get ahead of time i just didnt wanna order wrong stuff or parts i didnt need but i would say i was pretty close regarding the engine internals. I have someone that is gonna help me...

Thats wat i said in the beggining i made a new thread because i couldnt find exactly what i was looking for and i had alot of questions regarding MY build. But thanks alot