Hi Everyone,I need someone to hold my hand a bit through this wiring in the saturn alternator into my 1g harness. I am just looking to extend the wires of the oem harness.My Harness has x 6 wires total (x2 Whites) (x1 blue thin wire) (x1 yellow thin wire) (x1 black and white, oem plug)...

Hi Everyone,I am having a problem with the pop-up headlights on my talon.I suspect it’s the relay, but so far what I’ve got right now is headlights that have to be wound up.The funny thing is when I put the socket for the pop ups into the switch for the fogs they operate down (still won’t...

Hello everyone,I have purchased a block off plate and bypassed the FIAV, while opting to keep my ISC. My question is, do I still need to run coolant to the throttle body when running just the ISC .....I would like to block off the two coolant lines coming off the FIAV and the one on the water...

full interior 10 and up Canadian seat belt kit all bolts etc - 135 shipped Anything you may needtext me with needs or requests 1-416-670-1296

Hi Everyone,bare with me here, as I am building my first engine and working on getting the camshafts dialed into manufactuer specs.I have been watching jafro's videos and have reached the part were I should adjust my solid adjustable liters to zero lash. The thing is, after tightening down...

Good Morning Everyone,I have my engine mostly assembled and am now placing the kelford 272's into the head. My question is, is it normal for the lash or distance between some of the roller rockers and cam lobes to be different or should the distance be the same across all lobes.This is my...

Is it possible to hardwire a 90 CAS, into a 92 wiring Harness ?

Good Evening,cam someone confirm for me the cam with the yellow band is the exhaust cam ?They are not labelled anywhere elseKelford 272sThanks,Kris

Good Evening Friends,I just got my head cylinder back from the machine shop. I had them assemble my head with kiggly HP valve springs, kelford 272 cams and aem adjustable gears.This is my very first engine build and I just want to be extra cautious. Does this look right to you. the gears...

Hey everyone.can someone tell me the part numbers on the test springs we should be using to degree cams and check valve clearance on a 6 bolt ?First time assembling an engine.thanks,Kris

Hi everyone,Has anyone ever tried to mock up a 4g63 exhaust manifold on a 4g94 SOHC ?I am trying to get rid of my old 16g set up and someone is interested in it for their 2003 oz lancer.Just wondering if anyone has any insight....Thanks Kristopher

I'm about to use a spot weld cutter and attempt removing this bracket out of a parts car for install in my project, does anyone have any pointers or advice ?I imagine this is going to really suck.I bought the OTC spot welder kit along with a good dewalt electric drill. Im gonna practise on...

Hi Everyone,So I have run into a rather nightmarish scenario with my car. I was replacing the carrier bearing bushings and when removing the nut that holds the driveshaft I discovered the threads are completely messed up and not torqued to 29lbs that they are supposed to be.My attempts at...

Hey guys,I m swapping everything out of my 90 talon into my 92. What exactly is different with the wiring harness ? Can I use a 90 CAP sensor with a 92 harness ?

Hey guys,My 90 has some really sweet parts but unfortunately the floorboards are pushed up and shes really started to rot out on me.I am running AEM EMS v1.I have purchased a 1992 shell in much better cosmetic condition, and this winter I plan on swaping everything over.I am just...

kristoph submitted a new DSM Profile :11 second 1g dsmRead more about this vehicle here...

Hey guys,So I came across a four bolt rear end, everything is good except the actual subframe has rust holes in it, can I just bolt on the four bolt trailing arms, differential and sway bar to my original three bolt rear subframe ?I guess what I am asking is if there is any difference...

Hey guys,I recently came across a steal of a deal on an s90 throttle body and an old Magnus sheet metal intake manifold for my 1990 1g TSI AWD. I am gearing up for the install but first I need some more info.1) Will all my 90 sensors work? (TPS, ISC, AND IPS) It appears the IPS sensor will...

Hey guys,So my boost leak test revealed a massive leak at the throttle body. Being a 90s car I have the funky throttle body with the fiav and isc that wont bolt up to my new s90 throttle body. I have decided to delete the fiav with a bypass plate allowing me to run the ISC.now for the ISC...

Hi Everyone,Can Anyone help me identify his Magnus manifold? I bought a 92 tsi parts car that came with this manifold on it. I have verified the block is indeed a 6bolt. Now the head I am not so sure about. Does anyone know the measurements of a 6bolt dsm head cylinder intake runner...

Hey everyone,When replacing my front control arms, the Bolt that goes up into the frame is completely rusted and stripped. Its the one that goes up through those little brackets that wrap around the bushing. What are my options, the threads inside look completely toast. Do I find a longer...

kristoph submitted a new DSM Profile :90 GSX STREET/DRAG CARRead more about this vehicle here...

Hey dsmers,I got to installing a the three peice tubular crossmember from bulfab. Welds are great qualit of product is great the issue is the front mount is now completely solid and my other mounts are all stock.In turn I have out a dirty 6 inch crack in my bellhousing, having sourced a...

Hey Dsmers,This is my first post here as I have a problem with the install of my non cruise control cable.I bought the non cruise cable off ziggy at rtm racing and had my mechanic install it.I noticed slowly but surely the gas pedal getting looser and looser, untill finally two days...