Whats up guys and gals. Did some street tuning tonight on my car and would like some feedback on my logs. I am aware of 0.4 degrees of knock occuring in the logs however i ignored it for now as it is sparatic and not over 1 degree please correct me if i am wrong. This is a built 6 bolt on full...
Whats up guys so im about to start going through my suspension on my 1ga talon. I purchased a set of KYB AGX from stmtuned also ordered strut hats,end links and front control arm energy bushings.I wanted to replace the ball joints but ran into alot of bad posts on here in the past about the...
Whats up tuners. Are the evo 8 timing maps from factory “blow up” proof for a beginnerish tuner? I have a timing map that was ran on my big 16g turbo setup. Turbo was upgraded to a borg s257-sxe. So rather start from scratch. Thanks
Whats up guys and gals happy new years to yall.Finally took the car on a road test after finishing up the auto swap. Using the forced four PLUS2 no TCU. Car feels like it is in 2nd gear at all times. Using the shift button I only feel it upshift to 3rd. And downshifts to 2nd.I don't feel...
Whats up guys so today I started and idled my car for about 30 minutes shut it off and now wont start. I have been reading about the coolant temp sensor being an issue. My question is would it read correctly on ECMLink but cause issues to ECU even if the live data shows normal temps?If I...
Whats up guys i am installing a trans cooler on my 1ga. I went with a Derale 13614 it is 10x12 i mounted it where the original smic went. I quickly tried to see if bumper fits and feels like it will need some trimming on the lower lip area.
Does anyone know what needs to be done to wire up a Dynatec Arc-2 and 300m COP on a 1990 DSM? The coils are wired already on the plate. Also have my Arc-2 setup with soldered in tach interface from OEM coil.Marty told me something about the PTU needing to be rewired. I cannot find anything.
Whats up fam. So almost done wrapping up my auto swap on my 1990 talon awd. Fired it up yesterday and only enguages in drive.When shifting into reverse engine rpm doesnt not change. When put in drive rpms drop.It free revs in reverse. And when in drive it seems to not want to move forward...
In need of desperate help here guys.1990 eagle talonI installed the arc2 box per the old threads i found.https://www.dsmtuners.com/threads/arc2-box-plug-and-play-in-a-1990-dsm-part1.524945/https://www.dsmtuners.com/threads/arc2-box-plug-and-play-in-a-1990-dsm-part2.524948/Removed the...
Selling evo 3 big 16g td05h. Turbo has little to no shaft play. Didnt burn oil neither. Removed to upgrade.
Seeking $250 shipped and paypaled.Hotside has small crack near the wastegate flapper.
Whats up yall.So I have a 1G Dsm im bringing back from the dead. Been sitting for like 3 years.
Long story short I stripped the interior and have a lot of interior panels that are gonna get trashed if no one wants em.Im doing a bigger set up (s257 sx-e) And currently running the Evo 3 BIG...
Whats up yall. I have a 1990 eagle talon.
Long story short.
Built 6 bolt
E85
Fic1050 cc
Ecm link v3
Speed density
Car sat for 2 years. I added 2 gallons of e85.Wont start unless i cover up the compressor housing inlet. Kinda like its on a maf and covering up a huge unmetered air leak.Tune...