What up every one, I'm looking to put on some wheel spacers to bring my wheels out a bit to flush up with my fenders. Has any one had good or bad experiences with these. What is a good size to get. I don't want to over do it just flush it up a bit.

Looking to meet up. Any one down.

I am having the same thing going on when i accelerate. So any help on what to check out would help alot

Any one else around the area. Looking to meet up on a sunday, maybe meet some fellow members

I tried to find what you were talking about but had no luck.Now that is a busy cockpit, but looks great

Thank you for the help, i plan on doing the boost leak check, checking my plugs and wires, i jusy wanted to get a few more ideas so i could chase a few things down instead of one thing then post, one more thing then post. I have not really got to really dig in to it yet. But i do know it drives...

That sounds like a good idea. Now i have searched for the location of the knock sensor and what i have seen is its located on the front of the block and plugs in by the fuel rail. If i am wrong please guide me in the correct direction

Hey guys, need a little help. Hope you can help. I have my 96 gst. Drives perfect untill it goes in to posative boost. When above 0 on my boost guage it hesitates alot and if i dont let off it feels like fuel cut but im only at 10lbs. So i am looking to fix it and wondered where to start. I have...

Yes

Ok that makes sense, thank you for the advise

i am looking in orderng a set of strut tower bars for the front, rear and lower. i have a spyder and was wondering if they are the same or if i need a diff one if i can do one at all. any one installed before on a spyder.

Ya I still have that trim piece but i don't trust it to hold a drink, not a tight fit and the lid to the arm rest falls and knocks it over. I was looking to maybe fab something right behind the arm rest. I don't use the back seats for anything so I wouldn't have to worry about it getting hit. I...

I was wondering if any one has custom made a cup holders in the 2nd gen. I am looking to do something for 2nd cup holder. I have a idea but I wanted to see if this has been done already. If u have a use or pics please share

i have seen some posts on the cockpit but all the pics are either gone or links don't work. I would like to start a new thread for you to post pics of your cockpit. I am also looking for ideas for mine. Like I want to remove the airbags and maybe do something nice in the passenger side airbag...

Sweet, thanks for the help

Saw this post and wanted to high jack it. I just picked up a 98 eclipse. I want to swap the rims with my 96. I have the wheel lock nut key for the 96 but not the 98. Both are stock and look so close to being the same but the 96 key won't fit the 98. I tried all 4 wheels, no go. Any ideas

See how my bov outlet faces the engine. I want to get a new pipe piece so my bov outlet faces the front again so I can use my stock tube again and get rid of this s shaped one I had to come up with

I need one that looks like the pic in the link

I have one with the 1st gen bov but it is facing the wrong way, so I am looking for one with the adaptor side ways. Any thoughts of where

will this fit the 1st gen bov

After doing some reading, looks like ecmlink is the way to go. Thanks guys

Then what one do I get dsmlink, ecmlink, or what others

What ecmlink do I want to look for, like are there diff versions

I would def get a tuner but that is a bit more down the road. Right now I have a boost gauge with the t25 a boost controller that I have not installed yet. I want to do the exhaust (seems like the best to do from all of u). Install the mbc and crank it all the way up to...15psi. And enjoy that...

Ya Florida don't care. At least I have not seen them care about anything on cars or trucks. And there is no emissions

I live in south Florida, there are no rules, well they are not enforced.

I am running the stock T25 and I am trying to find out what would be better to do first, exhaust or FMIC. I have the money to do one right now. Ideas on what u think or feel is better to do first.If exhaust should I go with no catI have a intercooler with 3 inch in and out, should I reduce...

And Would it be better to run no cat

So with a t25 and all stock, what would be better to do first. Fmic or cat back

Ohhchhittt updated OhhchhitttView updates to this DSM profile...

Ohhchhittt updated OhhchhitttView updates to this DSM profile...

Ok so I wanted to start over. I put every thing back to stock and I do have the insert removed from the BCS. I originally war holding strong at 12lbs. Now when I read it its only holding a 10lb with a little drop off to about 9lbs then holds. I did a boost leak test and it seems to be good. I...

i am looking to do a intercooler install here soon. Can u guys post pics of your inter coolers. I don't know what style I want. Also interested in trying to keep my bumper reinforcement.

^ that makes a lot of sense. Thank you for the help. This stuff gets confusing some times.

That's what I was thinking. But I wanted to make sure. I did remove the insert on the BCS already. Guess my next step is to get a boost controller

yes I searched, lolSo I was messing around with my car cause something was not right. I lost 2 lbs of boost some where. Thought it may be a leak. So I tested it. Seems good. Holds lbs with a really really slow let off. I tried diff things removing hoses and re fitting them. I bypassed the BCS...

Thank you, Ya its a 96. Its in perfect shape. I got it from the original owner and he kept in the garage. It only got 74k miles on it.

How did they work out for you

It kinda helps to post even if a few years later. Problem never resolved. What if I needed the answer now. So I say post on

Oh your in new port richer, that is a hike

We should make a little meet one day to meet up and see others rides. Like a Sunday early. Or even a sat night

Looks kinda cool. They are way beyond what I have, lol. But it would be cool to see what the future holds

Do they have good tread, i have the stock fan looking rims

Thanks, it's work in progress

i am in the Naples Florida area, I am looking for some oem rims from a 2nd gen eclipse. Or what rims do u have and how much.

Ok so I was a little bored today after ordering my new bov. So I snapped a few pics of my baby.

This is what I used. And rubber washers to seal it. Just drilled holes in the pic cap for the gauge and valve stem.

Ok got one made up sealed and ready to go. I will post results this weekend. I removed the first spring so now the release button don't work and the pressure can fall on its own. Let's hope it don't fall, lol

Oh ok so I got something going on. You think I should check for boost leaks

Ok that is some good stuff right there, thanks. My vacume is reading below 30. Like the needle just drops all the way down below the lowest reading on the vacume side of the gauge.