i heard its a bosch something but i cant find it.. sorry im bad at looking things up i guess i just wanna go to napa or an autoparts store and pick one up... So does anyone know the maker or part number so i can go pick one up...

i dont have the factory tray and i havent found anything to fit or a person to weld in a spot.. i have a Optima Yellow Top Battery to fit there i just need the tray so i can mount the battery securely.. it fits on the right side back area of engine bay so if anyone has that tray available i got...

I built my car and had engine taken out and refreshed and added some new parts like a head and HLAs and some other goodies.. Put it all back together and was having help with the wiring.. WELLLL the person helping with the wiring had to leave the area and hence took his expertise with him. He...

hello all... I recently rebuilt my car a 99 GSX eclipse AWD Turbo.. I am having major Wiring Harness Issues.. the person who was helping me no longer is local and took the book he labeled stuff with and I have no idea how to fix this issue.. I was wondering if anyone was local that could come...

Found out that the Inside Intake bolts are to be Torqued to 14 lbs and my Friend who helped me torque them down said they were supposed to be 30 so now that I know they are NOT to be 30 do I loosen them to 14 or will the gasket be messed up from being torqued down so hard.? or leave them? will...

im trying to find a Turbine Housing and there is one for Hx35 and 40 and I don't know exactly what I have on here...Its a BullsEye Housing and one is for each but look exactly like each other so is it the size of hole the CHRA fits in or the Opposite side or what? I looked around before posting...

Are they REQUIRED? I was told not to but as I seen on the DIAGRAMS there are 2 on each of the top bolts of the Turbo to MANIFOLD... Do I require these ... http://www.streettunedmotorsports.com/parts/oem_mitsubishi_turbo_lock_washer_mr187848.htm or do I even need washers to hold the 4 bolts ....

What is a good replacement OEM or any aftermarket.. im lookin at C-Tek Standard kind.. OEM ones are Expensive.. was wondering if these would be ok or be bad over time.. Or what kind are good replacements besides OEM.. Thank you.

I am going to Purchase new head studs and when asked Which I needed I was given choices and I was wondering.. The L19 says for Drag Use so is L19 Over Kill? im shooting for 500 550 AWHP.. so THOUGHTS And ADVICE?? Thank You..

I have a set of rear tail light for bulb type of setup.. BNIB. ONLY opened box to inspect when I purchased and received them.. Since I have decided to go in a different direction with the look.. So my indecisiveness is your GAIN.. I paid $180 id be willing to do a round $110 Shipped OBO here...

I have a set of rear tail light for bulb type of setup.. BNIB. ONLY opened box to inspect when I purchased and received them.. Since I have decided to go in a different direction with the look.. So my indecisiveness is your GAIN.. I paid $180 id be willing to do a round $110 shipped OBO ...

Hello I got this idea from a Car Design I seen... I want to take the Airbag Unit out of my Passenger Side and replace it with a Docking Station and Holder for my TABLET that I want to run ECM Link on.. I want to do this because I wanna be able to Tune On the fly plus use it as another Screen to...

I see T25 T28 T16 Variant and a few others? I have an HX35 Hoslet I was wondering what that type is called.. and how can u tell when looking at other brands of turbos?

How do I link my 2 profiles into one when I respond to posts or emails.. ive seen people with like 5 cars all on one post.. some say sold but still on the signature side of things .. id like to know how that's done..

Twizted99GSX submitted a new DSM Profile :99 Eclipse 420a *CLEAN*Read more about this vehicle here...

I know that my Motor is a STROKER but I don't know what the Liter is.. I bought a Caliper meter to measure my valves and tear drop for mod and to see what MM my Pistons were.. so do I just measure the pistons diameter or the Cylinders themselves.. Ty with this help.. Still trying to learn.Be...

So I was told that my Head had 3d Gen HLAs..... And what I got was this... Top 13 are 2nd Gen HLAs Bottom 2 are 3RD GEN... and the LONE ONE to the Right is a SOLE 1st Gen HLA.... ANOTHER ISSUE but nothing that cant be fixed but UGHHHHH...

I was told that the bolt was 7/16 deep socket. I used on bolt and got all the nuts off and on last nut it stripped. Now i did notice when taken it off they were not TIGHT they kinda wobbled. So last bolt wont grab now i cant get my girdle off i cant even use hex key to get it out. Any...

I was thinking of doing a modification I seen yep once again on JAFROMOBILE.. But its where you thin out the metal between the valves to allow more air flow.. I was looking at my pics and I think that it has already been done.. The INTAKE SIDES looks like they have been shaved already and the...

I just seen these by accident and they look pretty good for keeping oil in the pan.. Was wondering if anyone had any experience with these things.. Thank you for any input.. Ohh and Windage Trays ??? Combo of both work well??

I just Purchased a wind Tray for my 7 bolt Block.. and I was wondering what the bolt size was? he didn't have them but he believes they are m8x1.25x16mm. Any one know this? ty for your help.

Hello I was watching a video with JAFROMOBILE and when he took off his oil pan I noticed he had a plate he unbolted with 4 bolts held on to the girdle?.. was wondering if that is an important piece I do NOT have the piece on my car and was wondering if it is needed... Here are the pics let me...

Ok Here are the pics of my Intake and Exhaust Ports and WOW there is a lot of buildup.. What causes this and is this Fixable with Hot Tank or what can I do to get it down to look new again? Wire Brush around the Valves? I wanna do as much as I can to clean it and restore it unless I have to have...

Hello Dsm'ersI know this is a MLS Gasket From Cometic but I was wondering I don't know the exact type like the diameter and such so I just measure on the inside the Full Circle to get that correct? and the Thickness of course is just measure the MLS fully compressed..Only reason I...

Hello Dsm'ersI am back with the Engine Finally apart.. Well the Head from the Block.. SO after some muscle and FUEGO (Fire) I got the ARP studs out YES THEY ARE ARP!! woot.. I got them off and pulled the head off and THIS IS WHAT I SEEN.. I think the Number 1 Cylinder is the one closest to...

I believe this is a CamShaft Angle Sensor.. I took the 2 bolts holding it on the block off and it just spins on there... There are 3 other bolts if I take those off it should come off.. Correct? but I was wondering if anything will come apart that I need to keep together like springs or anything...

Hola Dsm'ersAs I have previously explained in previous posts I am trying to determine if the engine work done on my car is in fact what was explained in purchasing my car years ago.. Now I had a few good yrs of enjoying my boost noise and making mustangs and other assorted Muscle Cars feel...

Hello Dsm'ers..I am here today because I THOUGHT I had a SHOP put in my Clutch about 2 yrs ago... I was told to do a breakin process. I did that and I waited like a good boy to get into it and start racing.. I bought a ACT Streetlite Xact flywheel & CenterForce Dual Friction Clutch...

Hello all how are you today?Ok yes that's right I am trying to see if the car the person sold me is exactly what he said it was when I bought it.. I didn't receive any paperwork and when I bought it the trans went out the very next day... We had words needless to say.. But he NEVER gave me...

Hello. I have an issue I took all the belts off and Marked the timing spots on the belt as well as cam gears.. I then took off water pump and oil pump.. Found out I DID NOT have a balance Shaft Delete Like the guy had said he had done.. so I am now wondering if he actually did the Stroker Kit to...

Hello how is everyone today... Good I hope.. I am not new to the site but I am back from a long Break.. I am a proud owner of 2 2G DSMs. 1-1999 GS Black on Black Leather 5spd Kept very clean and a Beautiful 1999 GSX Black n Tan Leather 5spd Kept Clean minor body damage previous Owner.. Anyway I...

im looking for MOON ROOF repair shops or a person who can fix my moon roof ON MY 99 GS..I pushed the button to make it open up and it started to move then one side stopped when the other side kept going it made loud clicking in pop sound and now its COCKEYED and open in my car.. it WONT SHUT...

Twizted99GSX submitted a new DSM Profile :TWIZTED 1999 GSXRead more about this vehicle here...

i recently bought a 1999 GSX with 300-350 hp already.. within 24 hours of buying this car my clutch went out I am now being told I need to replace the one that was in the car.. I was told it was a stage 3 clutch but after my mechanic got into the car said it was NOT a stage 3 and that I needed...

i recently bought a 1999 GSX with 300-350 hp already.. within 24 hours of buying this car my clutch went out I am now being told I need to replace the one that was in the car.. I was told it was a stage 3 clutch but after my mechanic got into the car said it was NOT a stage 3 and that I needed...