Started working on my rear seat delete. I got the deck section in yesterday. 5/8" MDF hinged in the back for ease of access underneath. Also had to hinge the side wing sections in order for it to hinge (tight fit). I now need to do the front panel. I'm doing that out of a 2" x 10" (cut down to...
to get that one SOB 10mm exterior door handle bolt loose, you know the one I'm talking about, the one above the lock. I've tried everything including a 1/4" ratchet and the back of it hits the window glass.
:mad:
Anybody tie their fog lights into the side marker lights? Disconnecting the plug down by the fog lights and connecting directly to the side marker lights. Fog light switch would be inoperable and fogs would always come on with the side markers.
I found a pair of h3 led foglight bulbs on ebay that I wanted (6000k) but needed to know the dimensions to make sure they fit in my housings. This was two weeks ago.
I emailed the seller but got an auto message back stating the seller was out of town and would return a couple days later.
Never...
Anybody use these guys on ebay? You can either send in yours or pay a core deposit on one that they have in stock and then send yours in after receiving theirs and then they return your core deposit. I'm not sure what all they have in stock but I don't think it's limited to 420a's...
I just installed a 2 din Kenwood dvd receiver and my radio reception was really bad. I sent an email to Kenwood asking them if they knew what the problem could be.
In the meantime I took everything apart and wrapped all wires in electrical tape thinking they could be causing interference.
Sure...
Why is it when I look on Crutchfields website for 2 din stereos the only ones they show that will fit our 2g's are 1din. Do 2 din technically not fit our cars? Also, any recommendations for a dvd receiver in the $250.00 range.
I just shortened my AEM V2 which brought it up into the engine compartment (see attached pic). I was wondering if there would be any benefit to adding a 3" or 4" hose from the cut out next to the fog light up next to the filter. Just to bring some cold air into the engine compartment so the...
I know a lot of companies that used to make aftermarket parts for the 420a have fazed them out but I thought it wouldn't be difficult to find an underdrive pulley. Can't find an unorthodox or afx anywhere. Any suggestions (besides sell it and get a turbo). :D
Just got my new XXR 530 wheels installed today and noticed I have a little rub in the rear. Only happens over a good size bump or hard turning. I can see that it only rubs at the very top of the arc of the fender and only the very inside edge of the lip.
I was debating picking up a fender roller...
I'm going to be removing my gauge faces in order to sand the backs. I want to make sure I get the needles back on so the gauges will be accurate.Temperature- I know what the operating temperature is. I should be able to bring the car up to temp and while it's running, reinstall the needle at...
Was reading a couple of posts earlier about gauge clusters and it got me thinking. My car is a 1999 GS. It came with black face gauges. Found a few silver face gauge clusters on ebay. Problem is that the odometers have high mileage (one had 137,000 miles). My car only has 39,000 original miles...
I've seen some posts that say a 17 x 8.25 +35 offset with 235 + 45 tires will and some that say they won't.I've got a lowered fwd 2g with 17 × 7 + 43 (I think) offset wheels with 235 x 45 ×17 tires. No rubbing on front or rear fenders. More than 1" gap on front and at least 1" on rear.Is...
Just purchased a set of XXR 530's and since they have 10 lug holes I was wanting to plug the extra holes. Has anyone else done this and what did you use? Not a lot out there made specifically for this purpose. Looking for flat black.
Anybody tint their 2GB headlights? Just purchased a pair of Vision stock headlights and decided to install a light tint. Here is a pic of one of them compared to a non tinted one.
I'm installing Hawk brake pads on fairly new rotors. Rotors are in excellent shape and don't need to be turned. Hawk instructions say to sand the rotors with 150 grit sandpaper in order to remove old pad residue. Any particular sanding pattern (cross hatch)?
I know that Eagle Eyes makes aftermarket original headlights for the 2G eclipse but does anyone know if they ever made OEM headlights (did they come from the factory with Eagle Eyes?
I purchased a second Megan Racing short shifter to do some modifications to it and see how it works. I had 1-1/2 inches cut from it (shortened) and then had it tilted forward 25 degrees. After that I had another linkage pivot hole drilled in it equal distance from the other two and then had the...
I've been having problems with my heater (blowing hot sometimes then warm other times) on my 420A. I thought maybe the heater core was partially blocked but today I noticed coolant drops on the inside under the left side of glove box. Does that mean a leaking heater core or is there something...
Anybody have any experience with the EBC USR (black) series rotors? I'm wondering how well the black zinc finish holds up. What would be a good pad for these also?
Anyone know of an after market mirror that will slide into the existing window mount on a 2G. Basically I'm just needing the mount. I purchased a rear view camera with the monitor installed in the mirror. The mirror/monitor clamps over the top of the existing mirror. I'd like to be able to...
I'm installing a powered subwoofer and need to run an 8 gauge power lead from the battery to the subwoofer. Is there an easy spot to enter through the firewall for the wire or is there something I can tie into under the dash for this large of a wire?
I'm changing plugs and wires (Accel wires) on my '99 GS and thought I would change the coil since it's been on the life of the car and I'm working in that area anyway. Thought I would go to MSD but after reading a couple of threads here I'm not getting that fuzzy feeling about it. Only motor...
I just put a set of BF Goodrich Sport Comp 2's (235/45/17) on my GS and when I got it back from the shop they had put 32 psi in all four tires. Max pressure on these is 51 psi. Obviously, I wouldn't run 51 but I though 32 was low. I called BF Goodrich and they looked up my car and said a good...
I need to change the front dash speakers in my 2G and want to replace them with stock speakers. Are the left and right side interchangeable? There are some new ones on Ebay but they are advertised as passenger side. I can't see why they wouldn't be interchangeable but I figured I had better...