Hey guys, I've searched over the last few years on my projected set-up.
For starters, I want a stock appearance car, that's my mindset behind all this. I have a Dejon tool smic with a small 16g. Realistically I only want to run about 18 psi. I not searching for as much power as I can get from...
I've been reading a ton and it seems like most answers were based off other goals for their car. Here is my situation, I have had it in my mind to get FEAL coilovers for my weekend stock rebuild 1g. I won't be racing it or tracking the car. I came across some megan coils that are the "street"...
Hey, I've made up my mind I want the feal coilovers. Im stuck on if I am needing the 441 or 441+ at what point is it worth the upgrade in springs? If its just a daily driver would you benefit?
Im hoping someone can help, I luckily found a 90' eagle talon with an electric asc sunroof. Sadly the switch was cut off and stuffed the wires behind the headliner. There are 3 wires coming into were the switch would have been, a pink wire, a yellow, and a red. Then after the switch is only a...
Hey guys never had this issue and I have replaced clutches on these cars before without issues. I bought this car and the guy before tore it apart about 15 years ago and never put it back together. He said the tranmsission was rebuild and it appears so, he also have me a act 2600 clutch and pp...
Hello, I'm about to order a vrsf fmic and read alot about only the vrsf j pipe will work with the kit. When I went to order it there is not option for a j pipe.. what would i have for options at this point. Thanks!
So i got a motor from a guy that he has yet to start. I checked the timing and it seems like a 7 bolt oil pump cover is on it because it has the timing mark for the crank behind the tensioner. Am I stuck with ordering a new 6 bolt cover?
I bought a motor that was rebuilt 14 years ago and has not ran.. it has webcams in it, all the reviews I see say that they are not the best.. should I run them or get stock cams for now
So if you where in my shoes what would you do.. I got a 6 bolt motor with the shell I bought that he said was assembled by a shop and blueprinted but has sat for 14 years in his garage. I turned it over by the crank and it moves just fine. I'm obviously going to order a new timing belt kit...
Hey guys, I've been looking for a 6 bolt for my 1g project. I ran across a guy local to me who is selling a 0 mile built 6 bolt, all the parts are good brand names. He is asking 2,700 for the long block. Head is also built. Is this fair? I understand if I did it all myself it would cost me even...
Hey guys, working on my buddy's mazda speed 6 awd, he said he was on the freeway and the car started forcibly slowing down. Then if stopped he tried to move it and it wouldn't move. He towed it to a shop and they said the transfer case seized, I just got this home and off the trailer so I have...
Hey guys I'm impatiently waiting for my fender braces. Just curious who has installed them and how much of a difference did it make? Would love to hear input,
So I put a huge turbo on my buddys 06' Cummins for him and he said he didn't want his old one so I ended up with a he351cw in my hands.. Ive read every thread I can find (the few I could) would it be worth trying to run it? I see a few people have but was hoping to hear if it would be better to...
So, what it seems like so far is that a random injector will lose its signal. Last week I had a random misfire code. Found out it was injector number 2 not firing. Now today injector number 4 stopped working. I forgot to check the continuity on the injector itself while the issue is happening...
I have a log but I'm at work ill post it after, I noticed the other day my wideband was not doing the "free air calibration" so I plugged in my laptop and when I started it the car looked normal, once it got hot the car kept switch from open to closed loop with no throttle, but the idle switch...
This issue occurs normally when I first start the car, but has happened while just cruising as well. I will start driving and any throttle/rpm the car will shoot full lean (16.00 on my gauge) and it will have absolutely no power, I noticed if I'm not just starting out at a stop then my car still...
I just put a new act flywheel, southbend kevlar clutch, forged shift fork, OEM tob, OEM slave. Master was not changed out.. I think my clutch is not fully engaging, I've never fully gotten on the car yet because I'm breaking in the clutch but I got it close to making boost and it feels like its...
Anyone interested in a "stage 2" pressure plate? I found out my car had it with a OEM disk so I was not sure if anyone was looking for a cheap setup. 50 bucks!
hey guys, my car has been down for probably 4 months now with a different issue. finally got the car fixed and i go to test drive the car. clutch works just like it did when it was parked, just fine... i drive about 5-10 miles and i go to push in my clutch and it has little to no pressure till...
Okay so I've had this intermediate sputtering problem with my car. I have put Ned plugs, wires, coil, ptu, alternator, fuel filter, fuel pump, injectors. Still no fix. Well today for the 2nd time it showed really badly, I went to the store when I left I came up to the light it died stumbled a...
Alright I've been chasing this issue sense I've owned the car... here's what's going on. Seems mostly to happen when it's 1) raining (or after I wash my car) 2. Any time I start the car and drive away in 1st gear or 3) I downshift coming up to a turn and once I start going again the issue comes...
Okay so I know normally, it would be obvious that a coil is going out but it's 1 off of each coil. The left picture, it's number 3 and 1. Now before I go testing everything I was wondering if with having no cas because it's a 95 motor, and the p.o put a evo 3 coil pack on it could that for some...
alright guys, so Monday my car died while going down the freeway as im in the middle of moving i completely have no tools at all so i felt the fuel line it felt soft (no pressure) so i order a new fuel pump, put it in today car started up and ran just fine went down into town and as soon as i...
so just woundering how common this is, today im 99% sure my fuel pump died on me...i say 99% sure because im in the middle of moving houses and i have absolutely no tools... great timing right... so i found a flat head screw driver and removed the return line on the pump and nothing came out, i...
Couldn't find a thread on how many miles are on each. I have a 2.0 wanting to build a 2.3 or 2.4 because I already only rev my car to 7k rpm I don't like "revving to the moon"Just worried about longitivity thanks guys. so just a simple.
I.e 2.3 - x miles
I'm running out of ideas here, i replaces plugs, wires, and took it to English racing to have a tune, of course the whole time they had it the problem never came up. So sometimes my car cuts out, i think I've narrowed it down to when the throttle is at WOT or close to it. I can give the car half...
Alright, my wideband yellow wire that goes too the white wire in the ecu got ripped off, my car was running like crap trying to figure it out. I finally found that and i had the car off hooked it back up then when i started the car the idle was jumping from 1k-2k rpm and it just kept pulsing so...
Okay so i have not owned the car very long but ever sense i have it has had a slight sputter in the higher rpms, then recently it started to feel like it had some resistance when i would give it gas and the car would slightly pull back then it would clear up and pull fine after a few seconds...
I got 2 questions, first my alignment before I swapped brembos and wheels my car drove straight as can be, now it pulls left and has a slight shake on the highway. Would the brembos cause this at all I ask because on the driver side it could have used a little more grinding on the back it...
So i took the car out today and i noticed its really harf to put it into gear, it feels almost like something is blocking it and i have to force it in, also it would not got into 1st for me a bunch of times it would just grind, 3rd grinded a little too, and reverse. Does it sound like the...
Well its not complete yet. The wing has to come back off and i need to try the bolt holes so they won't leak, and i need to bleed the brakes from the new brembos. Other then that i was told I cant wash it yet so its really dusty and still needs to be cut and buffed. Anyway here she is! I'll get...
Okay just a quick simple answer, my car came with front brembo breaks (not sure what they came off of) but im looking for evo 8/9 rears and cant find any, there are a ton of evo 7 rears on ebay but I cant seem to find a lot of if the evo 7's fit like the 8/9 I seen a few of the posts say "evo...
So i did search and found 2 threads that wasn't much help. as far as i can tell i only have 92 pump gas around me, i currently have a 2g that i enjoy being able to dd or just hop in and cruise, it has a small 16g and im wondering if that alone will max me out on 92 pump gas, or is there a...
Hey guys I got a question, my car sputters alot at WOT, from searching I found it seems that the coil pack is most peoples problem. So I got this car it has a evo 3 coil and I tried searching for people using a evo 3 coil and not much luck, so I'm wondering if I should get a new OEM coil, is...
okay these are my first logs i bought the car the way it sits i watched the ecmlink videos and i think everything is setup correctly so i did 1 idle log, one cruse log, and 2 pulls. he said its a evo safe tune, when i take off in 4th sometimes it feels like i hit fuel cut or it bogs down some...
So guys, even after i just got done asking if i should put 6k into my 1g that i had completly taken apart, or buy a 2G, everyone told me to start the 1g, but oddly enough my tax return arived, that was 4500, i jumped on craigslist like normal and the same day a army guy was leaving washington...
So I just got this 95 eclipse the window didn't work so I fixed it now its all aligned and goes into the window stripping fine its just now the top of the glass leans to far in, when i roll it down you can hear it pop off the little track it sits in when its all the way up. What do i need to...
Hey guys, i just got this 95 gsx, the first gear and reverse is grinding also sometimes shifting into 3 it slightly grinds, so its only a matter of time, One day i would love to have a hx40 on it, as it sits now it has a small 16g on it with supporting mods, so with my goal of one day hitting 10...
Hey guys so I called around and finally found a shop that could talk to me about 4g63's and knew somewhat about them, so I feel a little more confidant in trusting them. there's also one more shop that's going to call me back to see if they can use a torque plate from a company (renting) but the...
Okay guys ive had my 1g now for a while i plan on doing a high hp build. No exact numbers its a auto, debating if i should finally start it its all gutted im not sure if i should have the tranny rebuilt or keep it with all the easy mods, tc stall, kiggily plates, shift kit, and try to find a...