He is repairing the current ones as they are also not found here but he told me it's best to just replace them.I will be ordering them OEM to have it at hand to replace it before they go bad again.Where can i get them OEM? I don't trust Ebay.

Thank you guys for all your help.The Mechanic didn't find a new starter here. I live in Dominican Republic and DSM's are not found a lot. He said it what was actually wrong was the Bendix, he's going to replace it.As well as the Clutch cylinders that also went out.

The battery has been barely used but i also tried to jump start it in case it didn't have enough charge but it continued doing the same.Thanks for the link

Hi Guys,My car won't start, it was working just fine but had to leave it at my parents house for about 2 months because i went on a trip and when i came back at first the clutch went all the way down to the floor and would not shift into a gear but i fixed that, issue right now is that it no...

Hi guys, turned out to be a bad Timing Belt Tensioner & Pulley.

Also the inside is diiiiirty. Someone recommended an engine flush but i'm not sure. I've heard positive and negatives about it and remain unconvinced. Would changing the oil more frequently, let's say in half of the time it's supposed to, help cleaning it?

I haven't changed anything recently, but the last thing i did change were all the belts and water pump, however the car was working just fine, i haven't been using it much recently though. Last time i started it was two weeks ago but it was just on about 3 minutes and prior to that it had about...

Hi Guys!The car suddenly did not want to maintain on after starting it. As you can see on the video, the car starts up and shuts down after a couple of seconds regardless if you keep the gas pedal on. It started doing this with a horrible ticking noise, so i replaced the lifters with new ones...

But it can't be possible, for one sensor to go such as abs, to cause the car to not brake

Hi Guys,Haven't been able to do much on this matter as i have been swamped with work. I will start vacations on wednesday though.I am now inclining towards ABS as i moved the car from parking space yesterday and noticed, it's not really braking, i completed the brake fluid which was at the...

I think the ABS are on the firewall, i think it might be this one, what is this for? Seems like dual pressure switch, no?The Power Steering pump is fine, i had a leak recently, i fixed it but haven't been able to clean it jaja

Hey guys,One plug somehow broke and got in the way of one of my belts.Now, i don't know where that plug goes into, i tried looking but i didn't see anything where it that could go. This is on a 4G63T. Do you guys recognize it?The previous owner apparently bought a freaking cheap belt...

Very nice! I wanted the same coilovers but there's an issue:Re-sell: In my country there are around 10-12 Eclipse and the guys who have them, don't spend much money on it, so if for any reason down the line i would need to re-sell them it would be extremely hard. Since i'm not planning on...

Phew! Thank you guys, was getting kind of worried after buying everything jaja.Do you think I would need to roll the fenders?

Hi guys,My car is not lowered, I have 18 inch rims but changing them to XXR 527 18x8.75 +35mm, planning on putting them with 225/40/18 tires. Ordered Megan Racing lowering springs which have a 2" drop.Something I just noticed is this bolt on top of the the tires/rims I have now without...

Hi guys,My car is not lowered, I have 18 inch rims but changing them to XXR 527 18x8.75 +35mm, planning on putting them with 225/40/18 tires. Ordered Megan Racing lowering springs which have a 2" drop.Something I just noticed is this bolt on top of the the tires/rims I have now without...

I need help guys!The car has suddenly started to have a crazy ass idle. I could start the car and the idle be perfectly fine and at any given moment on the ride or when i turn it off and turn it on then it's either really high (Up to 2,000rpm) or too low (300rpm) this is after warming up the...

I just ordered the 1999 front bumper and headlights as well :) Feeling happy.All i have left to buy is the rear bumper, EZ Street Coilovers to then move to the engine bay :D

Hi Jaydsm, i had tried that before but there were still air coming in. What we did was to shut off manually some kind of vent that is accessible behind the glove box. It reduced greatly, i still sense the smell a little but i need to change my weatherstrips. If i open the Sunroof then it comes...

And i fell in love even harder this time around. Finally have the car again, it pulls great, we haven't boost it up yet. It's currently set at 7psi on the stock turbo and mani.One thing...this car has always filtrated smoke in the cabin, do you guys know any possible leads? At first i thought...

This picture is from last night, hopefully i'll be getting the car back today :)Have a messed up front bumper, have to get that replaced with time, due to the size, the shipping here cost a lot of money.

Sorry, i forgot to mention it was a Drag event and Luis Mendez does not drag.There's some pictures of the event in this link:http://www.razine.com/do/espanol/galeria-de-fotos/dragueo.html#id=album-564&num=content-92188

Thank you Arrowhead. You should have crossed to the island. We have an event in the mountains; we have Lamborghini Aventador racing Ferrari Italia's, Carrera GT, GTR's, Panamera and other exotic cars. I'll upload a couple of pics in the next days.

Hi guys,Had an eventful October which started with my dad having been diagnosed with Cancer, so as you may know, the car was the last thing on my mind. He is going to have his second chemo on Tuesday, the first one was a good one.This week we are finishing the car, the noise turned out to be...

Thank you Kreez!I actually have no idea if it was brought here on 95 or if it was brought by a local dealer.At the moment we didn't test pushing the clutch in and i haven't been able to further advance in this but it does sound an awful lot like the TOB. I will keep you guys posted.

Lucky indeed! Hopefully everything will turn out ok.

Unless i'm wrong the alignment plate is something like the picture below right? If that's it, then no, the clutch kit came with another one and that was the one used:This is the one that came with the clutch kit:

Thank you guys!We fired up the car yesterday. Had a weird sound in the transmission, the guy said that since we put in a new clutch and flywheel there is something scapping (Don't know what it is but that he would need to reduce it).

Reliable and fast huh! Jaja.I've already made my parts wishlist but undecided on the turbo. In here Precisions 6262 are popular and have given great results but i've seen Holsets in here, so I dunno.

Very nice! I have an AEM Uego but have to order the power cable. What are your plans with your DSM?Thank you Anthony, that sounds awesome!I always forget to order de Power cable for the Wideband :pWill be posting more in the upcoming days as i am just missing some electrical connectors to...

Thank you! If you need anything just let me know. I know most of the stores owners and have good contacts at the yards.Finally man! I'll be ok with the 63. My immediate goal is to have it running without problems. Then upgrade the turbo and manifold with the ones I already have, then...

Engine is in, have to do some things though:1- My radiator needs to be placed a cap for the coolant as it doesn't have it and this engine doesn't have it to the left of the valve cover. 2- I have to get another downpipe or have it custom made. I would take the opportunity to upgrade my stock...

So sorry to hear that Anthony, I am hopeful your luck will change this week and you'll be able to have the work done. My luck usually doesn't last long jaja.I can work on the car but I have a certain respect to electrical work, but the guy I have working on it is an expert, hopefully the car...

Nevermind that, turned out the previous owner gave me the original engine mount. Found it home and the engine is in already, pending electrical work as the harness has to be modified for this one.

My mechanic said the engine mounts didn't fell into place, he would have to do aome work to get it to fit. Could the engine just come from an Evo and that's why it didn't fell in place?If so, are there any differences in specs between the 4G63-T from an Evo and an Eclipse?

Wire Tucks! They look pretty neat. I talked to my electrician, he knows how to do it but said he does not recommend it at all. If there is any electrical proble it's a hassle to take care of it.

Badass!

Totally agree with you on this one:Evo 4 to 9 engine motor mounts, for mounting the reverse evo 4g63t but into any 2g lol

Cheap tuning only means having to spend more money afterwards. Why not try to save up what you can until you reach your goal and get DSM Link?

I would choose the GSX, a friend has a Miata and i am not at all tall and feel really uncomfortable.Miata's do make great Circuit car, the balance is great. But in your case for school, GSX all the way.

There's something about Black Cars with Red Rims that i love!But if it's either black or white, i would go with white.

So, the flywheel arrived arrivedI have to wait to open up the Ecu, seems to be an eprom but we'll know as doon as I open it up and check it out but the injectors are black topGod bless you!

These junkers has so many things that they don't even know what they have. The best thing is just to take some time and look through yourself.I don't have more info about the engine. I thought the intake manifold was stock. Let's hope for good surprises inside but it really doesn't look like...

Thanks AnthonyI know the 4G63-T comes in 6 bolts and 7 bolts. I've heard the 6 bolts are better though.The start up video is from the 61, I was wishing it had cams but it didn't. We will start preparing the 63 this weekend as the Flywheel should be here tomorrow.A little story about the...

I have a lot of time without updating.I installed a Manual boost controller in the meantime, also an Aeromotive FPR.Well I got lucky, I found and bought a Stock 4G63T I believe is the JDM versionThe 4G61T is 6 bolts and the 4G63-T is 7 bolts so I had to buy a flywheel, I took the...

Hey guys,Thank you. I will be doing a boost leak this weekend, along with connecting some sensors that are disconnected. I will let you know as it is possible that I have a leak, since the car starts boosting @5,000rpm

Hey Guys,1) I have a problem, it seems as if the Smell from the engine bay is coming thru the AC Vents, it's put to recirculate so it shouldn't be inhaling it. Could it be the tubes circled in Yellow in the picture below? Should i put something to close them?2) I had an electrical problem...

Still haven't been able to check if the oil pump sprocket has anything to do with this but the sound is similar but not the same.I was trying to check for the sound of a faulty cam gear online but didn't find anything, i am doubtful into buying the gears as my mechanic asked me.

Thank you! I wrote you a pm last night bro.

Hey guys,I have a 2G with a 4G61T swap in it. I have to replace one of the Cam Gears, i was wondering if i could put a stock set of 4G63T as i found a set for cheap.Through research i read that the Timing belt is shorter on the 4G61T but i found that already.Please advise and thank you :)