Wondering if anyone out there happens to have the gear ratios for a T-5 out of an 05 v6 4.0 Mustang. Trying to do some speed calculations and not having much luck finding the v6 gear ratios. Seems like it's all v8 stuff I'm finding or doesn't specify its for the v6. Have a pic of the trans tag...
Has anyone figured out a good way to remove the bushings for the cam caps in the cylinder heads without ruining them?I have a cylinder head that someone removed all the bushings from. I was hoping to take a set out of a junk head but they crush easily and my blind hole puller attachments for...
Anyone ever seen a maf translator with spark adjustment? IIRC all the ones I have seen before just have dials for fuel. I could definitely be wrong tho. Just trying to find instructions for it. Going to put it on a very mild built daily driver.
I bought an entire semi trailer of 4g63/DSM related parts about a year ago. Found these pistons with no markings but there's only 3. They have quite a dome to them and the rings are about 1/2 the thickness of factory rings. I doubt I can buy just 1 even if I can figure out who makes them but...
Does anyone know where to find the specs for Eibach 4.1060 spring rates? I can find them for sale online but can't find anything other than the drop height.
Found this in the bottom of a milkcrate in a bulk lot of 4g63 stuff I bought. I'm thinking maybe a 1.8 throttle body?Hoping to identify and if anyone can use it let me know. Hate to toss something that someone might be able to use
Looking at a car which the dash has been swapped out so that VIN doesn't match the title and when the car was painted they ruined the vin tag there. Anyone know where else they put the vin numbers on 1g cars? I know most cars have it stamped into the body in other places as well but not sure...
These were installed on the brake lines on a v8 swapped Dakota my brother bought. Have no idea what they are. Figured someone on here might have seen or used them before
Never seen one of these in real life before. Started driving a different car this week and found the factory sunroof deflector in the bag in the trunk. Going to try it out on my way home from work tommorow. If its not too noisy will be nice for cruising!
With a car that is 99% stock I am getting a stumble above 5500ish rpm. I used to be getting black smoke out the back too which I knew was boost leaks. I fixed all the boost leaks I could find and have no bubbles coming from anywhere now. Takes about 90 seconds to leak to 0 from 15 psi. No more...
Anyone know where to get new or decent condition intercooler/charge pipes for 1g cars. Last time I got some from performance part out but they are out of stock. Was hoping somewhere else sells them. Mostly needing the intercooler to bov pipe and box to throttle body. Mine has seen some better days
Is there any noticeable difference in spool times between the 14b and T25. Looked in some old forums and all I found was people saying the t25 sucks compared to the 14b and runs out of steam around 6000 rpm but couldn't find any real info on difference in spool times. Also if you know of...
Bought a set of what was supposed to be 950cc FIC injectors but seen they are scribed with 126-1250 so I wasn't sure if they are actually 1250's or if that number means anything.
Caps leaked out and corroded board. Removing electrical components and found that one is missing. Labeled as C44. Looks like it would be some type of surface mount resistor but hoping someone knows the specs for it.Thanks!
What is the minimum wiring needed for the alternator on a 1g. Do I need the "L" & "S" terminals at all. The description in the FSM is not very clear on what they are responsible for except for the dash light which I don't care about.This is for a stripped track only car. Had an engine fire...
I thought there was already a thread for this but can't find it. Dsms in the junkyard. Indianapolis Upull on 16th st.97 Spyder 2.4 sohc still has most parts as of 4/6
Could not get pics due to bad rain. Rims gone. Interior pretty crappy3000gt base model. 95k on the cluster sitting in the...
Busted the evap line on my fuel tank. I had already JB welded it a while back but the line was so crusty it snapped off. Looking for ideas to repair. I have an idea but figured I would see if anyone else has anything better.
Looking for opinions on which direction to go with each of my cars. I've got a 91 Laser FWD and a 90 Talon AWD.Laser has 272/264 Cams, EVO Beehives, Polished Head, ARP L19's, Balanced NPR Pistons, Balance Stock Rods w/ ARP's, DNP Manifold, Ported 14b, 2.5" Exhaust, ECM Link, KYB Adjustable...
Power steering pump is leaking from where the hose bolts on. I know there's o-rings under there and I've replaced them before on other cars.My issue is that the nut is not coming off the bolt. Instead it's unscrewing with the threaded shaft and leaving it stuck in the end of the hose. I tried...
I bought an aftermarket knock sensor which I know is a big no no but I figured it had to be better than mine which was so bad it set a code.....big surprise the connector has slightly different tabs so it won't plug in.I'm trying to figure out which wire needs to go to which on the knock...
Sorry if this has been answered before but searching for check engine light issues brings up so many threads that I couldn't find anythingAnyways on the 1G (OBD1) cars does the check engine light normally "reset" every key cycle.I drive the car for a couple mins. It throws code 31 for the...
I have totally given up hope on getting a machine shop to do any work right in the area I'm in so I am trying to buy what I need to cut valve seats and install valve guides myself.For installing the valve guides I have turned down an air chisel bit to the guide diameter. Only other question I...
Lapped all 16 valves and they all had a decent looking ring on both seat and valve faces after minor lapping. Slapped the engine back together and went to fire it up and it didn't even attempt to start. After doing all other diagnosis because I assumed the engine was good I finally ran a...
Didn't see it in the what size is this bolt screw listNeeding to know the size of the bolts that hold the fuel pump sending unit in. Somehow i misplaced them all and they seem to be an odd size because I can't get any other bolts to start threading in to measure the thread pitch. Even if...
Never have kept balance shafts but on my winter beater I'm gonna use as a daily I figured I would keep them since it's not a race purpose vehicle. Anyways the sprocket for the balance shaft is off slightly when everything else is lined up dead center. I also remember there being a few degrees of...
I have a 91 GST that I am in the process of rebuilding (blown headgasket and then sat for 10 years so the cylinders rusted) Anyways I pulled the engine to hone the block and the oil pump was very new looking as well as the water pump. Water pump says AISIN on it so looks like the guy that put...
I have a car that I am wanting to fix up for a winter beater. 91 FWD turbo. Its got like 204k miles on it. Compression test 25-50 psi. Head gasket looked brand new but was blown between all cylinders. First thing I checked was the head for warp and its got about .016 warp. I know the service...
Have an issue with hard starts and running rich when hot (Anywhere from 200-230)Trying to eliminate things. Unfortunately I have a 95 and my scan tool will not read anything on 95's so I'm trying to test the resistance of the ECT old school with an ohm meter. Does anyone know the values it...
Can anyone tell me if the 1992 Chrysler service manual for Laser/Talon has specs for both the 6 bolt & 7 Bolt engines? Trying to avoid buying both the 91 & 93 service manuals to get all the specs. I do know the manuals are available online but I am old school and prefer a paper copy in my hand...
Got a few things on my 2g circle track car that I'm not sure what they are. Stripping my wiring harness of everything except engine control devices but unsure what these pieces are. The white connectors with blue and brown strips in them are from behind the gauge cluster. The black box is from...
Wondering if anyone knows of anywhere to get the specs for MDH275 injectors? I googled but could only find injector planets specs and they list them as 375cc injectors and i beleive they are 275cc based off the part number so I'm not sure how reliable the rest of their specs are. Just looking to...
Has anyone used these rods before?https://www.ebay.com/itm/Racing-Connecting-Rods-ARP2000-Bolts-for-Mitsubishi-Eclipse-2-0L-EVO-4G63-Early/274584242323?hash=item3fee7f0893:g:q94AAOSwWpFfar~dI know they are the lowest line budget rods. I am trying to lighten up a 6 bolt N/A to get it to wind...
So this is just theoretical and I'm looking for constructive criticism. ("Get a Turbo" is not constructive criticism nor possible for the class of car I am running)My theory is that since Gas stoich is 14.7:1 and E85 stoich is 9.7:1 an e85 engine requires 1.5 times the fuel that the same...
Anyone used a Carter Stock Replacement fuel pump before? Made in the USA and I know they used to make decent carbs back in the day. Wasn't sure if anyone has had any experience with them before.... I know normally on a DSM the fuel pump gets replaced by a walbro or evo pump before it even goes...
I see the question come up on here every now and then about using an n/a transmission in a turbo car. I happen to have both transmissions open and next to eachother so I figured I would take a side by side picture.Both these are 1G FWD but a good picture for comparison purposes in the future...
I bought 3 core engines condition unknown to try and get one good crankshaft. Did get one good crankshaft out of the deal but I am wondering if there is anything worth selling off of them before scraping them out. They are 2G 7 bolt engines. Doubt anyone is looking for blocks that may need...
Question pertains to a 1993 NT Eclipse and 1991 Turbo FWD TransI know a turbo transmission can be used on an Non-turbo car. I just can't figure out if I can use the NT flywheel or if I HAVE to have a Turbo FWD flywheel. The car is NT and the engine is probably not pushing more than 160 horse...
Maybe I am just an idiot and can;t search correctly but I cannot find any replacement fuel tanks for a 1G FWD car. Do they not sell replacement tanks for our cars? I really don't want a junkyard tank as mine is rusted to hell inside and likely that one in the junkyard will be just as bad...
Bought a set of Stock evo valves and springs. Turns out 4 of the exhaust valves are bent. Hopefully I can work something out with the seller on that side of things. I'm a little ticked right now but anyways I'm trying to weigh my options. I would really love to find 4 evo valves or replacement...
I have a 6 bolt head that has most of the valve seats sticking partially out of the casting. I know the heads sometimes come like this. This is the worst one I have seen before tho. Most of several the seats need to be replaced but they're still going to stick out.Question is. Has anyone ever...
I have a 4g67 head that I am working on "porting" for a 6 bolt going into by 91 laser. (I put porting in parentheses because I'm really just cleaning up the casting and not taking much material off) I noticed that there are little humps in the exhaust right next to the short radius in between...
ARP lists the torque spec for their 107-6002 rod bolts as 26 ft lbs with their ultra torque lubricant. (I don't have a stretch gauge) This seems low to me I'm probably wrong but just want to make sure their site is listing it correctly. All their other rod bolts for Mitsubishis are 40 ft lbs and...
Does anyone know of any machine shops that operate online that are reputable. The machine shops here in Indianapolis all suck a$$ and half a$$ everything they do so I'm hoping there's a machine shop out there that I can just send my rods off to to have ARP's installed. Wasn't sure if anything...
I destroyed an engine in my 93 N/A car I had built it for enduro racing. Mostly stock other than I eliminated the balance shafts and ran ACL race bearings. I only made it 24 laps and the engine locked up solid. It did get hot, I hit 240 degrees so I started making my way to the top of the track...
What is the most endplay a 1g 7bolt crank can have before it is too bad to use again? I bought a used engine and am wanting to use the crank out of it. It has .010 endplay. Spec says .002-.007 but not sure if that for on a new engineHere's the long story.I built a 7 bolt N/A engine for...
This came with a car i bought. Owner said it was a short throw shifter. Looks just as long as the stock one and I'm not sure if all the parts are even here. I found some kits on ebay that look close but the dont show all the hardware. I'm just wanting to sell but was hoping someone would know if...
This is a 420a NOT a 4g63Finishing up my 2.4 swap and after putting it in for the 3rd time and getting everything lined up and figured out I go under and find the part in the attached pic laying on the floor. I believe it is just a piece from the back side of the modular clutch which aligns...