The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

Search results for query: *

  1. Gstdsmboi

    DSM mechanic asap

    Looking for a mechanic I'm in charlottesville but no dsm mechanics exists around here so I guess fredericksburg or Richmond Virginia ### help, my car turns over but won't start I'm sick of dealing with it
  2. Gstdsmboi

    2gb cas on 2ga bottom

    Someone help me ### i just swapped a motor into my 98 gst spyder and it has a 2gb head on a 2ga block. What's the easiest way to do the cas without drilling? The guy I bought it from said I could just run some wires or something but I'm not sure. I've heard that I can get a 1g cas but didn't...
  3. Gstdsmboi

    starter interchangeable on 2g's?

    ok thanks alotone more question was the starter supposed to come with wires because it didnt
  4. Gstdsmboi

    starter interchangeable on 2g's?

    i have a 2gb head on a 2ga block in my 98 gst spyder, so when i went to get a starter i just asked for a 98 starter. Are these interchangeable?
  5. Gstdsmboi

    Redline mt 85

    Thanks a lot I'll check around
  6. Gstdsmboi

    Redline mt 85

    So I bought 2 quarts of mt 85. Do I need 3 and if so what can I mix with it I don't feel like waiting for another bottle to come in the mail
  7. Gstdsmboi

    How do I tap the cam angle sensor

    That sounds pretty difficult I was hoping for an easier install but thanks
  8. Gstdsmboi

    How do I tap the cam angle sensor

    So I just dropped a 98 motor in my gst spyder and it has a 2gb head and a 2gb bottom. Do I have to tap the cam angle sensor and if so how do I do this?
  9. Gstdsmboi

    What size nuts go on this?

    What size nuts go on these RESOLVED
  10. Gstdsmboi

    Can I still use this block

    Well I'm dropping another motor in sat but I have rebuild parts so I was gonna rebuild that one but I guess I'll try looking around
  11. Gstdsmboi

    Can I still use this block

    Yeah my friend told me I couldn't so I just wanted a second opinion on it, thanks
  12. Gstdsmboi

    Can I still use this block

    It's chipped where the tranny attaches above the crank
  13. Gstdsmboi

    Injector bolt size?

    What size are the three bolts that hold the injectors in?
  14. Gstdsmboi

    What Turbo is this? [Merged] Turbo ID Identification

    That's what is was thinking but I thought there serial was 01010Here it is
  15. Gstdsmboi

    What Turbo is this? [Merged] Turbo ID Identification

    I'm not sure what turbo this is49178-01030
  16. Gstdsmboi

    My first motor swap

    Thanks a lot that helped me get a good idea of what I need to do I really appreciate the help
  17. Gstdsmboi

    My first motor swap

    Ok yea I plan on buying one but I just wanted to get my car running first but I guess I'll be getting one before then, thanks for the advice
  18. Gstdsmboi

    My first motor swap

    Ok I'll look that up thanks
  19. Gstdsmboi

    My first motor swap

    Ok so I'm in the process of getting my 7 bolt rebuilt but in the meantime I am dropping another motor in this weekend. Does anyone have a step by step guide or write up to help me with my first motor swap and also what tools would I need? Any info would be much appreciated, thanks.Also the...
  20. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    ok thanks everyone
  21. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    Sounds like what I'll be doing then because the turbo still works I'm in charlottesville va pj91gsx we may have to do business
  22. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    thanks man
  23. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    ok but im talkin big 16g now
  24. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    400-450 hp occasional track use daily driver
  25. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    no do i need cams and if so what kind would you recommend
  26. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    also is turbo lab a good place to get it doneive got a boost controller full exhaust and i know im gonna need injectors and a fuel pump and dsm linkim actually getting it built now with manley rods and npr pistons too
  27. Gstdsmboi

    big 16g to evo 3 or bastard 20g

    so im looking to rebuild my big 16g turbo for my 98 gst, was wondering if i should upgrade it to bastard 20g or evo 3 and it will be my daily driver.
  28. Gstdsmboi

    14b upgrade to 20g question

    Oh ok mine is a daily driver but I didn't want to get the 16g and not be happy with it
  29. Gstdsmboi

    14b upgrade to 20g question

    Thank you everyone and I have read the upgrade path just new to this
  30. Gstdsmboi

    14b upgrade to 20g question

    So I'm wondering will this be just as good as buying a 20g and also will I need the better fuel injectors and fuel pump also, I'm getting the one that cost 600$14b upgraded to 20g- $525/ or $600 with billet compressor wheel Fully upgraded rebuild kit New td05h turbine shaft New compressor...
  31. Gstdsmboi

    debating between these two engines...

    yea im trying to be patient ill keep looking
  32. Gstdsmboi

    debating between these two engines...

    lol im just ready to get mine running
  33. Gstdsmboi

    debating between these two engines...

    u in charlottesville? can u do the swpok its my first dsm man chill
  34. Gstdsmboi

    debating between these two engines...

    PLEASE HELP, i dont want a 6 bolt and i dont want an rvr engine so which one of these will fit in my 98 gst without too many modifications. My engine has the small cam angle sensor on the left but in this one here, there is a small cam angle sensor but theres no radiator cap by the sensor like...
  35. Gstdsmboi

    Will this engine work with my gst

    Thank you so much
  36. Gstdsmboi

    Will this engine work with my gst

    Well my engine has the small cam angle sensor but the one I want to get comes without so could I just swap mine on to it
  37. Gstdsmboi

    Will this engine work with my gst

    So I'm looking for an engine to almost directly swap right into my 98 gst and I know the 7 bolt with the smaller cam angle sensor will but my question is will the 7 bolt without the cam angle sensor work and I just swap mine on or what will I need to do
  38. Gstdsmboi

    Can I rebuild this

    Ok I would if I could find one
  39. Gstdsmboi

    Can I rebuild this

    Lol will this work with my car or should I just by the one with the smaller cam angle sensor 4G63 DOHC Turbo Engine only (Without cam angle sensor) 95-99 - JDM Engine
  40. Gstdsmboi

    Can I rebuild this

    Yea I feel like he just doesn't want to be bothered with itSo I'm lookin at my dsm and the bolt is just missing
  41. Gstdsmboi

    Can I rebuild this

    Oh ok thanks well it's probably broken because the kid before me like exploded the transmission some how I mean it was literally cracked in half almost
  42. Gstdsmboi

    Can I rebuild this

    Cool thanks manBut aren't I supposed to have 7 bolts in that pic it looks like one broke
  43. Gstdsmboi

    Can I rebuild this

    Lol so where can I find one I can't find any in the junkyard
  44. Gstdsmboi

    Can I rebuild this

    ok thanks everyone ill try to post some more pics but the kid i got it from had broke an engine mount and cracked the transmission also so i bought a trans clutch and flywheel and my mechanic saw that when he was gonna install it, i just want my car running, i was planning on changing the timing...
  45. Gstdsmboi

    Can I rebuild this

    So I was gonna by a jdm engine this weekend and know I can't find a us one in a junkyard so not an option, but before I buy it my mechanic says that my block is busted but he says you may be able to bend it back and make it work but he basically didn't want to deal with it. It's bent right where...
  46. Gstdsmboi

    maintenance?

    I just got a 98 gst spyder, I'm looking to do the same thing, check out the dsm maintainence guide on here
  47. Gstdsmboi

    charlottesville area

    Well lets liven things up around here and show these Hondas who's runnin things lol
  48. Gstdsmboi

    crazy no one talks on this thread??

    I'm in charlottesville va looking for dsm mechanics or someone to teach me a few things, I'm looking to get my 98 gst spyder running this week, and don't I know you Madison lol I had the mustang
  49. Gstdsmboi

    Charlottesville area mechanics

    So I just got a 98 gst spyder a few weeks ago, it had a cracked trans, flywheel and bad clutch but my mechanic should be installing them this week, I'm not sure if the car even runs yet because the kid I got it from had lost the key and he had completely cracked the transmission and broke a...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top