Curt Brown was killed by a drunk driver while riding a bicycle...https://www.newsbreak.com/news/0P8ezZ5F/police-arrest-suspect-in-deadly-hit-and-run-in-bell-acres

So my galant has a positive front camber issue. I swapped the front and rear subframe from my parts gsx for a simple 5 lug swap and 4ws delete / 4 bolt lsd all in one. The PO had some lowering springs on it nut when I compare the front strut of the galant to the gsx the galant is about 1"...

Finally passed the point where the 1g BOV is no longer holding pressure. Since this is a first for me and just about everybody has passed that point awhile ago... What BOV to get for a 1g flange? I will be recirculating too! Looking for some options, price isn't a huge factor either. Thanks

So while trying to data log, so I can tune for the new turbo setup, the computer just stops/freezes. It never records the same amount of time before it stops data logging. Sometimes it will record 90sec other times I will only get 20secs, never the same amount and it is making tuning a...

Curious to see what everyone is paying for their dyno time. I have been browsing my local shops but don't have a reference point. I found one that charges $80 for 3 runs back to back (with cool-down) or $120 for an hour and they run the dyno on both (obviously).So what do you pay, looking...

Looking for a good source (or sources) to buy a quality s16g compressor wheel. Thanks

Looking to see if anyone knows off hand what cars I might be able to steal an engine coolant temp connector off of. Going to the junk yard, would be great to narrow down the search a little. My yards never have dsm's or obviously I would go that route. Thanks

1g is running a little rough, come to find out injector 4 is not working at idle. above ~1500 rpms it runs smooth and normal. I have evo injectors and they have been fine since I have had them. So now the question, what would cause the injector to not work only on idle. I am going to throw...

So I found out my 2g has a cracked manifold, well, two cracks in it. I was going to get a FP manifold but I was wondering about the porting? Should I get it ported or not? How would the ported vs non ported effect spool? Would the ported give me more steam up top? I'm only a 16g car so was...

Just a quick question... I need to snag a stereo pigtail off a junkyard car since the PO cut it off. Does the 420a cars have the same stereo pigtail as the 4g63 cars? For a 2g obviously...

So I don't know if the kit is supposed to come with a nozzle bung or if you are "supposed to" thread the nozzles directly into the piping? :confused::confused::confused:Either way if anybody knows an acceptable alternative to buying a bung and having to wait for shipping yet again that would...

All the free VIN check links seem to be real old and not working so here is one that workshttp://portal.remorainc.com/autocheck.php?vin= Just click the link then enter your vin right here ^^^^^^

Can't make up my mind on which wheel I like better or which will look better on my car. 95 Tsi kona blue (Click the pictures to make them bigger LOL) EDIT: In 18x8 they are 29lbs might just skip themRim 1hyper silverRim 2Gun metalWhat do you guys think? I wanted the hyper silver...

This kid (18 or 19) at my little sisters 18th birthday party (im much older) asked if I owned the talon outside, Damn it I thought, "ya that's mine". He then said "good I'm a car guy too and saw your exhaust and had to say hi." No harm there right, then he asked if my blow off valve was...

Cant seem to find an answer. The only post with this gauge that I could find went unanswered. I have the innovate mtx-d boost gauge and it tells you how to log using their little computer application but it doesn't say which specific wire to use (output wire) to log with a different device...

Finally got the car started, idled like crap did a log to find out I am not getting any metering air. It reads 0 gms/sec does this mean the maf is toast? also getting a P0100 Volume Air Flow circuit.I am new to link and watching/reading a lot but need a little help on this one. What do I...

Need help identifying this wire/connector it is in the same bundle as the stater wires. Not sure where it goes. I am not getting power to the starter and trying to figure out why. I pulled the starter and tested it via directly to battery and it works.Any help on what this connector is...

Alright guys probably a stupid question and I can't quite find an answer.What down pipe do I get for my 2g with a 16g turbo? The car came with an ebay turbo, and external wastegate, so I need to get a new down pipe for the 16g and don't want to buy the wrong one. The car already has 3" magna...

lasershark submitted a new DSM Profile :95 Tsi awdRead more about this vehicle here...

Nevermind thanks

Just trying to get a value on some BC adjustable cam gears that came with a recent 2g purchase. My goals for the car are not extreme enough to justify keeping/installing these. What do you guys think they are worth?

I did the starter relay bypass on a 2g I just got. I was ruling that out, but as soon as I turned the key it acted as though I blew a fuse and lost all power to the car. The car does nothing, it acts like there is not a battery in it. A little help? I checked all the fuses they are still...

I have some eclipse parts to put on my talon, both doors and both fenders. My question, what is the best adhesive to use to put the plastic moldings from the talon on to the eclipse parts? The cars are 1gb.And any helpful tricks or advice in removing and installing the plastic moldings would...

So it's said to say that another clean 2gb has bitten the dust. 92 gsx 6/4 is now trash. Chick was at a yield left turn lane (flashing yellow on her side) my side was green but turned yellow just before I entered the intersection, so she pulled right out in front of me, literally had no time...

Anybody in the area heard of it here, or have you gone or want to? My wife found the meetings sounds kinda cool, throwing it out there for dsm'rs and all :hellyeah: Would be cool to get the local dsm's together.

I have been trying to tune my car and it seems no matter what I do (at WOT) the car jumps rich to 10-1. I have been keeping an eye on my logger and a couple of days ago the low fuel trim just reads -- but mid and high fuel trims are still functioning. I have been reading a lot of stuff but I...

hello guys...My rear driver brake caliper is rusted bad and froze up, junk yards here have no awd 1g's. So before I buy some new ones ($$$---ouch) I was wondering if there happened to be any other cars that have compatible or the same calipers. I have searched but seems most people are only...

so my gsx hasn't been performing under boost like it should. It doesn't pull as well as even a stock 14b does. Under boost wideband reads 10.0/1 @ (10psi). I've been reading up on things and I'm outta things that I know of to check.Mods: 3" turbo back, evo 9 pump rewired, S16g, maft...

So I got an evo 8 fuel pump from a local ad and he just threw in another denso fuel pump but I cant find anything on it on the top right corner it says25 07h 3570and it also has a 17 right below the negative terminal indicatorsame size as the evo 8 pump any help or knowledge would...

before I talk to AEM I was wondering if anyone else has had problems with their uego boost gauge not functioning properly.It doesn't read anything past 6-7 psiIt reads vacuum and when the turbo starts to spool it just stays at 0 for a bit then starts to move and stops climbing...

so my bellhousing on my talon broke a while ago but shifted perfectly prior to thismy gsx grinds second (higher rpms) and third alwaysi was going to pull the gsx tranny and put the front of that bellhousing on the transmission with the broken bellhousing.I almost got it apart but it...

So I have a 92 gsx and previous owner had some ricer type tail lights on them, you know the ones that almost every honda has.My junkyards have scrapped all the 1g's that were here but 1 eclipse 94 and a sister junkyard 30ish miles away has 1 90 talon.I already grabbed the eclipse tail lights...

ok so I got this 1g gsx for cheap and they did the vacuum line cap/loop on the throttle body, and when I was comparing it to my talon I noticed that it was missing the whole vacuum line cluster that goes to pretty much everything so is it a big deal or not :confused::confused::confused:I know...

so i swapped my transmission last weekend and now my clutch wont work; the pedal would bind before hitting the floorI went under the car had the wife hit the clutch and sure enough it was hitting the bellhousing.I searched and searched and couldn't find anything similar to my problem...

so I had my transmission bellhousing break in half got a new tranny started working on it last night and I saw that all the flywheel bolts snapped and they are flush with the crank where they mount. I am going to try to use an easy out but if that fails what would be the best course of action...

ok so worst case scenario happened on my 92 tsi having some fun in a snowy parking lot and my bell housing snapped clean in two not repairable, I have a running/driving 92 gsx 6/4 combo parts car that I bought dirt cheapmy question, are all the 92 trannys and transfer cases the same...

Hello found a good deal on a 1gb 7bolt motor I cant seem to find a lot of information on this.Will my tranny work fine? (both engines/cars 5spd awd) From what I read the electronics are the same as far as sensors. True?So basically Im wondering is what might or might not work for the swap...

Hello found a good deal on a 1gb 7bolt motor I cant seem to find a lot of information on this.Will my tranny work fine? (both engines/cars 5spd awd) From what I read the electronics are the same as far as sensors. True?So basically Im wondering if what might or might not work for the...

figured I would thank the people who had feedback for my laser dilemma happy to say i made money on the laser and bought a awd tsi 92 6 bolt, had to put 1100 miles on my moms tahoe and trailer it home though (not the fun part) thanks mom! now it has an idle surge and high idle at start up a...

hey guys new to the dsm world but always been a car dude, so here's the scoop, I bought (last monday) a 90 laser turbo rs, i have been looking for an awd dsm for a while, found what I thought was a awd laser dude wanted 1000 for it 140,000 miles on it said it needed a new tps, well he didn't say...