What happened to Miller imports?Searches redirect to Kannapolis auto parts?Is this still the same company just with a wider vehicle selection now?I've been meaning to replace some wiring harnesses on my project gsx and heard good things about miller imports. I really liked how they...
Can anyone tell me what's stock and what's not on the oil filter housing? This is a 95 talon tsi awd for reference. I'm pretty sure the sensor on the left is after market as there's bright blue speaker wire coming off one of the leads and wraps around the bay before entering the cabin. What...
Thanks. Don't have extra parts so I'll have to make my own trunk floor. Does the AWD floor just sit even with the folded down seats and hump between the strut towers? I remember my RS having that "step down" in the trunk area.Also this is technically an AWD talon that was converted into...
Hi,Does anyone sell the bolt/plate used for holding the spare tire in the trunk well? Also is it a different part for the gsx or is it the same for all models?My gsx didn't have the trunk liner and stuff when I bought it from the last owner. I'm assuming it's the stock spare that's in...
Thanks. I've been debating if it's worth fixing or just getting a replacement. Doesn't someone on here make harnesses? I don't need anything crazy like the mil-spec ones.Thanks I'll get more pics.Any idea why the wiring would be patched/spliced for the cam/crank sensors? Do the sensors...
Hi guys,Was wondering if I could get some help figuring out what was done to the wiring harness in these pics. This is a 95 Talon AWD.This first pair of pics is from the driver's side just above the fuel rail and intake manifold.What are the 2 hacked off bundles of wires just above my...
There's a metal threaded insert embedded in the bottom of tank. That's what the bolt screws into to hold the baffle in place. The insert probably broke loose and the insert is spinning freely now. You could remove the baffle with the bolt/insert attached and try to separate them outside the...
Then I just put a couple coats of paint on the tops and installed my new Walbro pump and new gaskets.I would definitely recommend giving this a shot as most people's pumps probably don't look as bad as mine did and its getting pretty hard to find the AWD hangers nowdays. Definitely...
Hi guys,Just wanted to post a long overdue update. I decided to try cleaning up the hangers as it was pretty hard to come by a good condition used one and buying new seemed like a waste if I would be upgrading the pump down the line anyways.First off here are some better quality initial...
Sorry for the late reply.I ended up ordering RPF1's in 17x9 +35 as recommended. They're wrapped in Federal SS 595 245/40/17.They clear the rear knuckles (2ga) just barely. I like the fitment a lot overall. They're just about flush with the fenders, or poking out ever so slightly at...
Is it the same fastener (MB696120) for all the mounting points on the sideskirt pieces?https://www.clipsandfasteners.com/Mitsubishi-Moulding-Trim-Retainer-11mm-Stm-Lgth-p/a19320.htmOn STM they list MB696120 as a part for 63976B and 63976D but there's also a 63974B, 63974C, & 63976C in the...
Hi guys. I finally found a nice set of 2gb sideskirts to throw on my 95 gsx (technically a talon the last owner converted to a 2gb eclipse). The car has all the mounting holes in the doors and body but I have none of the mounting hardware.Does anyone have a link for 3rd party mounting clips...
You could just build a -6an stainless line from the pump to the filter or buy a filter kit with the lines for just a little more and never have to worry about sourcing parts again...
Hi guys,I'm currently fixing up the wiring that the previous owner did for a Talon to Eclipse conversion. The outermost bulbs on either side have a brown socket that is not connected to anything. Looking at the socket, it's a 2-pin connector even though the bulb is dual filament. It's been...
I just taped a penny onto the pedal. Was fine for 10 years. Doesn't get much cheaper than that. It's stupid that the hole for the stopper is just big enough to let the switch pass through. Great way for a broken piece of plastic to kill your battery and leave you stranded.
Looking to buy a 3rd brake light with mounting hardware and trim piece. This is the light on the inside of the hatch for models that don't have a light integrated on the spoiler.Shipping to Aiea, HI 96701Thanks!
Nice. I think other wheels have more clearance for BBK. I think I'm ok with limiting my brake options in order to run a wider RPF1 and have the flat spoke design I prefer.Thanks. I'd like to run at least a 245 if possible.Do you have a pic of how the wheels sit in relation to the fender...
Just finished reinstalling my tank after cleaning out a bunch of rust and old gas.You can see the rear mounting points for the cable here.I'm pretty sure the front most bracket does not mount to the tank shield. The shield attached to the mounting straps which hold the tank in place. I'm...
Forgot to update. Gave me a good excuse to add a milwaukee M12 rotary tool to my tool collection. Made quick work of the shield and bolted up easily afterwards :)
Hi guys,I'm looking to purchase some 17" RPF1's for my 95 GSX and wanted to get some advice on fitment. I'd like to run wider tires and I much prefer the flat wheel face on the 9"+ wheels vs the curved 8.5" and thinner RPF1's. From what I've been reading there's a number of challenges with...
FWIW
I did most of the prothane rear bushings on my 420a RS a couple years ago. It definitely came with a metal sleeve/spacer to make up the difference between the FWD and AWD control arm bushings. You can see it in the bottom left/right corners of this pic.I have an AWD now and will...
Thanks.Ya I found an video that showed the lock ring holding the sock in place.Everything I've found says there's a plastic spacer on the stock pump that gets reused? I'm surprised none of the DSM specific install kits include this piece. It keeps the o-ring from sliding down the pump...
Hi guysI'm installing a walbro 255 HP into my 95 talon awd. I ordered the install kit with the pump from extreme psi.What is the little metal ring for?Also are both white washers used?And is there supposed to be a spacer that goes on the outlet along with the oring and white washer? Thanks
Thanks man.I already got the tank mounted by the straps and got all the hoses connected. I don't really wanna mess with dropping it again. We had to use a jack on the straps and tank to get the front mounting points onto the studs on the car. Not sure if my straps are just bowed out a bit...
That was quite a pain but definitely doable. Putting the tank and shield back in is another story. Spent a couple hours yesterday putting the tank back in. Had to drop it back out a couple times and pull the fill tube. There's like zero room to access the hoses connecting the tank to fill...
Thanks. Car currently has ABS equipped. I'm thinking about deleting it at some point though.Are the non-abs engine harnesses the same as the ABS harnesses? There's just an unused plug coming off of them? My abs unit is in the front driver's side of the engine bay.Is the fuse box and...
I already pulled the sending units/pump hanger from both driver and passenger side while draining the tank. Is that all the hoses other than the fill hose?
Hi guys,Can you remove the fuel tank on 2g AWD cars without dropping the subframe? I searched and there were some posts that said it could be removed without dropping the subframe and others that said you absolutely had to drop it. Is it just hard to access the straps/bolts with the subframe...
Ya there's a bunch of crap that fell in. We're planning on dropping the tank and flushing it out. Can you drop it without dropping the subframe? Just exhaust and drive shaft?Thanks. Will give that a shot.There's so many fwd ones available for cheap but awd is so hard to find.
So my fuel pump and hanger is kinda bad.Does anyone make a hanger for the AWD cars or are the only options dealer or junk yard? I've only been able to find the FWD versions in the aftermarket. It looks like the OEM AWD pump/hanger runs $400-500 from the dealer (if they even have it)..Is...
I think the chassis harness are probably fixable.My main concern with the engine harness is there's a couple sections where it looks like a plug was hacked off leaving bare wires exposed. I'm assuming most of it is from the A/C and EGR delete. But there's a lot of random wiring and...
Thanks! Not in a super big rush but it sounds like tracking down the right one can be a pain. Which harnesses do you have available?Thanks for clarifying. The last owner hacked up the rear chassis harness for the eclipse tail and reverse lights (with electrical tape). I was thinking about...
Hi guys,I have a 95 Talon AWD M/T that was converted to a GSX by the previous owner. He also did an AC delete.I'm trying to get the car up and running but keeping finding more and more of the car's wiring hacked up with crappy splices or wires just twisted together and electrical taped. I...
Ya those are the colors. Thank you so much!
I guess I should just individually cap off those wires?Previous owner did an AC delete. I guess they got rid of cruise control as well.. idk why you wouldn't just leave the plug..Is that relay cap important?
Hi guys,I just want to confirm if this connector is for the upstream O2 sensor? The car came with an o2 sensor installed but the wiring hacked off right at the sensor. I found this 4 pin connector coming off the harness near the alt/PS behind the driver's side headlight. It doesn't quite...