Hey ya'llBusy with life and posting less than I used to, but the Hobo has had a busy season. Hurt a motor at the first IFO this year in the Semis. Nothing avoidable, just 5+ year old rods that prob should have been replaced 3 years ago. :lolguy:So I slapped together a motor from what I had...
Final Stats/Bests for 2019Best of 1008 AWHP on a Dynojet. Low 50s PSIBest MPH 164.x High 40s psiBest ET 9.5@155 40psi. (boost keep low for possible lifted head)I did lift the head at a local dyno day @990whp. Car still runs great. Compression is good, so I will likely re-torque and...
Still new in box. Zero miles, not rebuilt. Gen2 CEA ceramic air cooled BB CHRA. Will come with warranty card. Save $600 off retail. .82 V-Band in/out turbine. Can unbox and send pictures on request. Email [email protected] for fastest contact.This price is is PLUS shipping as the...
DSM Shootout Prep. Leaving easy, checking the tune. Looks like its makin' some Powa. They actually kicked me out since I didn't have a Chute LOL.The hope is to cut even a 1.60 60 foot-and 8's are a possibility. Still on a stock trans/Tcase/Rear/Axes + 200 zip ties. Trans was refreshed...
This is the norm.Every car I tune can see 35-40psi depending on set up with a stock ignition and NGK or similar wires before we see an issue.My POS last year was on AUTOZONE wires (lifetime warranty- have not bought a new set of wires since 2003 LOL) and NGK copper plugs. Worked up to 44psi...
Maybe I missed it, but is there a reason you are hard-up for a CNC port? Some on the fastest DSMs ont he planet dont need a CNC port to go deep into the 7s. If you goal isnt 7s or 190+mph, I'd love to hear your logic on needed the CNC port.
Well, good things are happening.933AWHP and out of fuel. Boost is still mild at 43psi. This is a stingy dyno too- Last year 801whp on this Dyno was good fro 880whp on Carlyles AWD Dynojet, and 160mph trap speed.Current plan is to add an AEM 380 to the mix and see if we can sneak a...
I have 2 sets of rods for sale. Whatever sells, I will use the other. :cool: First come first serve!Crower I Beams. These are $1000+ Rods. Come with H11 Bolts. Used- Bolts torqued once. $650 shipped...
4 year bump-I have been running a GT42 on a street car for 2 seasons now. For me, its great. 9k+ rpm is needed to make this thing work really well on the street. I do not have any issues transient response when shifting above 9k using NLTS. Oddly like TPG-I made 875 AWHP at 42 psi. Stock...
Agree 100% But, all things change over time. I'm glad I have the knowledge gained over the years. Kids that use FB exclusivity will never have the wealth of archived learning what was the forums. But in time, all things change. Funny paging through this thread, the only person with a join...
Hopefully relevant old thread bump. I have made 500+whp (135+ traps speeds() with stock 1G Bolts. The current HoboEvo is making near 1000at the flywheel (160mph trap) with standard ARP2000. It does not push ANYTHING at 40psi. 43psi it will push 4-8oz per pass. 47 psi it will push 20 oz...
780 Mustang- but its a little over 800whp not but whos counting ! ;)Some fun recent in car video after trying to break my $50 trans (I wont fix it if it aint broke!) Wont make any more power- Im 95% sure its just floating the valves past 42-43 psi. 42-48psi netted nothing besides more fluid...
Surprising day at Test and Tune yesterday. With the Gt42, if you miss a shift the pass is effectively over. Since it didn't want to shift into second over 7500, I decided to try short shifting 2nd gear to get it in and was surprised with the result!Short shifting the car caused it to...
Big Powa. Made 100mph HP than last year. Called it good at 42psi. Pump E75, 14 deg peak so plenty of room to grow! 680whp on this dyno was good for 156mph, so we will see what happens. My only goal was 9.9@160+ hopefully I have that covered. Cheapo notes- this is using $200 "bosch" 2200's...
Bump for some clarifications.Turbine is T3 .82. V band out. * Can be swapped for a V band in and out housing*TURBO HAS NO SHAFT PLAY!!! Feels tight as new
Looking to sell the manifold/turbo/gate/dump tube/O2/Oil feed/oil drain, and hot pipe (includes BOV) off the Colt. T3 .82. V band out. It is in perfect working condition. Only reason I am considering selling the set up is to force me into bolting the GT42 on the car. :cool:Looking for $1200...
Yup. They worked well. Single frotn ball bearing.I still think their Billet 67mm would ROCK on a DSM in a small T4 turbine (they dont offer it in a divided T4) or their new V band stuff
All DSM fitmentSee adds. Bring offers! Please email me at [email protected] for fastest response.https://cleveland.craigslist.org/pts/d/four-24x85x15-inch-drag-slick/6390237159.htmlhttps://cleveland.craigslist.org/pts/d/four-24x85x15-inch-drag-slick/6390237159.html...
TURBO IS SOLDThis clutch was pulled out of the box, and bolted to a motor with no trans in an engine bay. The car set like this for a year before it was parted out. As you can see The pressure plate and flywheel has never been engaged with the disc. There is some surface rust from it sitting...
First his in the Colt V310.5 @ 150. traction limited. Turned up the jam and almost put it into a wall. Picked up 43 mph on the back half though :)More to come.
Hey guys-The AWD dyno I work with locally expressed interest in making the dyno available all day the day before the shootout for people either needing help with a tune, or just fro their personal testing use. I had mentioned to him its near impossible to get on Dave's Dyno that week, and...
Colts Unite! Matt Step did most of the work on this one.
Cost out of pocket maybe 4-5k tops. You coudl duplicate it for between 4k and 20k. It depends on what you have already, how thrifty your are, and what your skillset it.
For example- Our Own Phill sold a clean AWD roller on here for...
Front
Gt Koni inserts with yoshi fab plates (max -1 camber)
Skunk2 springs on eBay perches (350lb6")
1g talon spindles with 2 piston brakes
Stock gt control arms , no swaybar
Rear
Agx shocks with extended rear mounts
Ground control perches with 200lb 8 or 10" eibachs
Stock 1g rear end setup with...
Last few weeks have been spent back in Mitsubishi land. Had to tune a pile of cars before the DSM shootout, last but not least a fresh tune for El MirageJust a mild 2.0L AWD swap in a $50 Mitsu Mirage. Ended up with 620whp out of a 10 year old GT35r in a small .63 turbine on a conservative...
Went 10.8@142 with a 1.9 60 Foot with literally, a bunch of junk and 110% Duty Cycle. Great Shootout!Best Pass 10.8@142 (1.9 60 ft-33psi)Only pic I have for nowVideo of Pass. Better ones to come.
4g63t swapped colt 10 sec pass - YouTubeThanks Goonie for that Vid.