My NLTS speed threshold value in ecuflash reads, "Vehicle speed must be UNDER this value to allow NLTS to be activated". I know that this is supposed to say "OVER" as it doesn't even make sense to activate NLTS below 19MPH. Any help with this would be appreciated. Thanks.

My NLTS speed threshold value in ecuflash reads, "Vehicle speed must be UNDER this value to allow NLTS to be activated". I know that this is supposed to say "OVER" as it doesn't even make sense to activate NLTS below 19MPH. Any help with this would be appreciated. Thanks.

How do i get a broken brake hose bracket bolt out?

Hey guys I finally smoked my stock clutch in my 1g. Looking for a cheaper option as it is my daily and I don't need a crazy clutch setup at this time. Lot of mixed info out there so wanted to start a thread.Specifically looking for info/user experience with exedy OEM clutch kit and Also comp...

Is it possible to achieve true anti lag with ecuflash? Not just 2 step?

Hi

Hey guys just wanted to ask a question to the people who have experience with evo ecus. I recently have installed an evo8 ecu in my 1g and it drives and runs great however it has been getting really cold outside and when I put my key in the on position before a cold start I hear the ecu whining...

Hey guys I'm gonna be swapping over my 4g63t from my 1992 awd talon into the clean 1ga gsx shell I just picked up. I am also going to be swapping over my transfer case and transmission. I just wanted to know what is the easiest way to pull my motor/tranny and is there any tips I should know...

My car idles fine but but the revs drop to close to 0 and the car dies if I touch the throttle. New plug wires, plugs, and ECU. Im just wondering what the problem could be, pretty stumped. Thanks

In search of a 1g ecu for pickup in chicago area ASAP

Hey guys my car has been blowing ECUs since i bought it about two years ago. It keeps frying the same 16v cap as can be seen from this link http://www.dsmisc.com/dsmweb-dw/faqs.html . Would you guys say this is being caused by faulty ISC coils? Thanks.

Will a punishment racing 2.5 inch o2 housing fit on a 3 inch downpipe?Nevermind Im almost positive all 3" downpipes have a 2.5" inlet

Hey guys pretty frustrated here and need some opinions because my car was running perfectly and out of nowhere it started to misfire badly. Before this i also had a cel for injector circuit (cel41) that kept coming and going but the car drove fine. Anyways, I limped the car home and I unplugged...

Anyone how to make the adapter harness for this. Can the pins from 1g harness just be swapped to the Evo harness clips without hacking wires?Thanks, I found some posts about this but nothing specific.

Recently I got a blow head gasket. I've removed everything to pull the head and all I need to do now is pull the timing belt. While working on my car is nothing new for me, I've never had to take off a timing belt before. That being said I would like to know the easiest and fastest way to do...

I want to trade my 1g swirlies which are in decent shape on good condition toyo proxes for my friends evo 8 enkies good shape but one of the wheels is bent a little and they are on bad condition tires. What do you guys think a fair trade/cash deal would be?

I know that with the stock motor mounts the "hood" on the front engine mount has to be trimmed off for the head to sit flush on the block with ARP studs but I was wondering if this is necessary if you have poly mounts. Thank you.

Hey guys I hate to be a benchracer but I have a question. Recentley I was called out by someone who drives a 2013 3.8 genesis auto (lol). I'm almost positive I could win especially from a dig but what do you guys think. I'm on a e316g (on 20 pounds), FMIC, ETS intercooler piping kit, walbro 255...

Loosing coolant without leaking, my boost dropping from peak psi, and *sometimes* a lot of white smoke at idle has lead me to thinking I have a blown headgasket. At first it started gradually and the smoke and overheating got worse. Is there anyway a headgasket could be a little blown and get...

.020 bore would be used with 85.5mm pistons and 0.040 bore would be used with 86mm pistons correct?

Hey guys quick question, now I know the evo 4-9 with the rotated engines (timing belt on passenger side) come with turbos that are unable to be fitted onto dsms ( without a lot of work at least) but the thing i was wondering was, if this is the case how come there are universal turbos that can...

Right now I have my manifold and turbo off. What is the easiest way to put everything back on in order. I was thinking 1.manifold 2. o2 housing on turbo 3. Turbo 4.lines 5.downpipe. Is this the easiest way?

I poked a hole in my radiator like an idiot. Luckily it's not too big and its on the metal core. A new radiator really isn't an option right now as I don't have the funds for it. What I wanted to ask is what are my best options? I've heard VERY mixed reviews on radiator epoxy, but my only two...

I'm shipping a turbo without the hotside. How can I package it so the turbine wheel doesn't get damaged.

I know a bigger engine reduces boost creep but I don't know why and would like to know. Thanks

I heard that the megan o2 housings (rec. and dumped) are the same as ebay ones with reinforced welds. I looked online but couldn't find an answer. Is this true? If that's the case I'd rather get a punishment racing one.

Last time I took off my turbo I had to take off the exhaust manifold because it wouldn't drop down due to the coolant line underneath the turbo. Is the only way around this to completely remove it ? Thanks

Does anyone know if chitown DSM is down? I tried to register but it didn't work.

Anyone know what wheels these are and if they are good quality? Need to know asap because I might be trading my 1g swirlies for them. Thanks

What is the best way to block off the coolant line going from the oil filter housing? Right now I have a small hose with a bolt in it but that's not working too well.

Hey guys. I recently got a check engine light on my dsm. When I ran it with MMCd it came up as tdc 41 or injector circuit. When I did some reading online I could not find much on this code. I unplugged and plugged back in all the injector harnesses. From what I could see there is no damage on...

Hey guys my dsm threw a cel today for for a injector circuit. All my cylinders are firing so what exactly does this mean. Also yesterday it started to overheat pretty good but only during idle. I thought that was because my front mount was blocking airflow. It didn't do this before but now its...

Are the people who live on palatine road in Arlington heights on here lol. I pass by everyday in my dsm and i see the driveway full of dsm's and evos lol.

Hey guys getting ready to pick up a 16g from some guy on craigslist and put it on my car this weekend. I have a 1gb. Any tips or pointers before going at it? I know i have to get all the gaskets and stuff what else. Can I keep the stock oil feed and return lines? Thanks.

So I finally got all my supporting mods for my new turbo setup and so I am in the market for a new turbo. I'm looking for something for street use/weekend track use. I've been looking at the evo 3 big 16g , FP 68hta, and FP red. I would like to pick up a used turbo because they are a lot...

Hey guys. I was wondering how do out transmissions and transfer cases put power on the ground. As in, what is the exact technical process on how power is transferred to all 4 wheels on our awd DSM's. I would also like to know exactly why and how the transmission and transfer case can be damage...

Hey guys. I just got done putting on my new mishimoto fmic (g-line) with my new ETS intercooler piping kit. I also did some other stuff like RC 550's, walbro 255, and greddy type s. My goal was to do all supporting mods for a 16g and I think I am set for one now. Should I do anything else before...

Hey guys. I just picked up a used Mishimoto G-line Intercooler. It is in pretty good shape but all the piping it came with is junk. I was wondering were i could pick up some IC piping (upper and lower) or could i make it myself? And i was wondering what would be the best way to mount it on my 1g...

Hey guys. I have a 1992 Eagle Talon TSi AWD. I have recently done some mods to it but I am in need of a good tuner and data logger. I have heard of the palm ones and the PC ones. I searched the site but all the links i could come across for tuners was from like 2006. I would like something good...