mr2krazee submitted a new DSM Profile :2g Junkyard RescueRead more about this vehicle here...

Wondering if anybody else is runnng this same gear lube and if so wht are your thoughts? I am about to put it in my transmission that i just put new 1-2 syncros in. Im hoping its a good cheap oil that shifts smoothe and alleviates the notchieness these cars are known for. Yes ive heard about...

mr2krazee submitted a new DSM Profile :Purple 1g AWDRead more about this vehicle here...

Selling a manual trans and t case from a 91 dsm. The set came off of a dsm I bought along with another dsm for parts. The seller said the transmission shifted fine before the timing belt let go so thats what im going by and also the gear lube looked near new when drained from both. $400 for the...

So I posted a thread about a month or so ago showing the two 1gs I picked up. I got one running as of yesterday. Ive been picking away at it for a few days and replacing all the stuff the last guy took off for one reason or another. This car has sat for nearly 10 years!!! Previous owners ( 2 ago...

So recently for $600 I aquired a couple of untouched 1g awd talons. When I say untouched I mean it. They are both totally unmodded, not even free mods. One is a 90 manual with moonroof the other is a 92 with the 6/4 combo as well as an asc installed electric sunroof. The 92 has been sitting...

Wtb awd 23 spline transmission and transfer case. Pm me.

My wife and I recently purchased a 99 Spyder GST with a transmission that only had 2nd, 5th, and reverse. We drove it home like that and kept driving our 6.0 swapped trans am while I looked for a replacement transmission to swap in, I had no luck but what I did have was my 1g FWD GST...

K I know everybody and their flashlight holding apprentice has been over this but I cant make a decision and have not found a thread that aids in my decision. I am going to be building a motor soon for a 2g Awd I'm planning on getting from a friend. I have a 4g63 head and an HKS 16G ( will be...

Looking to pickup a 2gb fwd 5spd trans... from Spokane but can drive to get a good shifting trans...

I need a engine harness for a 1g asap. In the spokane valley. Hmu please. Cash in hand.

So my car was fine and suddenly started throwing maf code 12 (I have maft2.0) so naturally i swap out to a known good maf I have as a spare. Same problem, cel illuminated and running like crap.I have swapped ecu, I have totally rewired the maft box, and I have swapped out my fp relay as well...

I kept getting a maf cel code 12 and the car wouldnt rev past 2k so I traced it down to the wiring in my maft. Now theres no cel for code 12 or any code at all and I have maf reading on my logger but the car just shuts off after about 5 seconds of idling and then I can hear the mpi/fp relay...

I have an issue in my electrical system on my 1g. Each time I turn the car on, the ECU resets as though the battery has been unhooked. The CD player does this as well and will not retain any settings I input.It first happened after a friend helped with some wiring for an electronic boost...

So I got my digital led boost gauge in the mail and I wanted an "OEM style" location that was in view with the other gauges but didn't want to sacrifice daily functionality. So me and a good friend proceeded to disassemble the center dash piece as well as the bezel around the gauge cluster to...

I've been logging with a netbook and mmcd and running MAFT for a tuning device. My low fuel trim pegs lean and my mid and high peg rich no matter how I set the MAFT. I also keep getting random high knock count under cruise at part throttle. I have a leak on my o2 housing to downpipe not sure if...

Just wired in a Bosch o2 universal sensor. I Dont get a constant fluctuation at idle only here and there. I know it worked right I've triple checked. Is this normal or should I have constant fluctuations at idle?

Hey so I'm trying to do my first laptop data logging setup. I wish to use a laptop I have I'm not interested in a palm device. I have been reading for hours for the past couple days but have yet to come to a good clear answer. I know I need a USB to serial (rs232) cable so got one from...

Just got this car and it may have belonged to a friend of mine years back. His was a n/t converted to turbo. It has turbo and many other mods now but I looked on the VFAQ decoder and didn't see a V there for eighth digit codes... only place I saw a V was for country code... I know it wasn't made...

Hey guys I'm looking to pick up a data logger setup. Either a palm or preferably a laptop setup ;with cable. Does not have to be overly fancy just need to be able to log. Who's out here and how much do you want??

Just got a new DSM... it has a MAFT setup and its the v1.0 from what it says on the circuit board. Does anybody have the manual? I can't find it anywhere on the net and v1.3 and up are the only ones spoken of the one I have seems to be a lost archaic device... I think I have the basic settings...

Hey guys just moved back to good old Spokane a few weeks ago and my turbo crapped the bed... looking to get ahold of a replacement asap. Please help... cash in hand... will go for anything but a t25.

Hey everybody long story short i need a 23 spline t case for my new trans and i need it asap. i have a 22 spline t case that is good i can trade, or i can buy it for cash, id rather trade because im kinda low on funding at this point after a few surprises came up and bit my wallet, im down to...

so i went to buy a trans for my talon and i wasnt sure about the t-case spline differences so i used the forums to id my transaxle by date which indicated that it had been swapped to a 23 spline. i procedded to buy a 23 spline trans and before purchasing i verified that the one i was about to...

Hey guys so 1st gear in my talon is officially gone. There is a guy around here that will sell me an AWD trans for $100. He says it sometimes grinds from 2nd to 3rd but was totally drivable and was no worse than the average DSM trans. For $100 that sounds OK to me because I'll be moving soon and...

there is a known vendor by the name of west coast dsm (user name is west coast on here i believe) and im thinking about buying some expensive/time consuming to install parts from this guy. ive heard very mixed reviews about his organization and have also found that the better business bureau...

i have the valve cover off to check out the head stud torque specs and while im in there im wondering which cams these are are? they say d1 on the intake cam near the cam gear and a1 on the exhaust side near the cam gear they both also say j and beneath the j they say 30. any ideas?

hey all, so i recently suffered a couple symptoms of a blown hg, the car will smoke white steam under rev and it drips water out the exhaust at the same time. im in the process of taring the head off to replace the hg and i got to the point of seeing that i have all new timing componets and...

hey so i already searched ALOT and i havent seen much that fills the voids here for me so with that being said heres my problem. a few days ago i notice the temp go up SLIGHTLY on the temp gauge during some spirited driving so i back off and crank the heat. temp goes down so i dont think much of...

my 1g makes a sudden jerk high up in the rpm band under full boost when doing a freeway pull. i let off immediately if this happens. it does it worse in 1st/2nd under WOT even without full boost, but in the higher gears its only under full boost at about 5500 rpms. so my question is does this...

hey so my 1g intermittently makes this strange rattle/chatter/buzzing sound from the head that is audible from 1k rpms up to 3k rpms where it goes away. the sound comes and goes, sometimes it is there after the car warms up (5 min idle) and other times its not heard for days and then all of...