im just wondering if the owner is on here.plate read GSXSTY or something close to that.alaska plate.im the guy in the black sti(sold one of my many 1g for a 4dr)
i have replaced both gaskets,used crush washers on the pan side and im still getting a TON of oil from somewere.ALL gaskets on every part of the car are new.this is my 5th dsm and this is really the first time i have had such an issue with oil leaks.i have pulled the turbo off about 10 times in...
i have to pull the turbo off....again and fix a leak.so now im going to need new crush washers,return line gaskets and assorted parts. who right now is offering the best price and fastest shipping?i dont want to got to satan and i need them by next tuesday. slow takes damn near a week to process...
i have a coolant leak that appears to be coming from the line that goes to the turbo.its the front line that comes up from under the turbo that bolts to the front of the turbo.its leaking from this line but behind the turbo were it connects with the bigger gray pipe that runs horizontal with the...
im trying to find what size bolt i need for the oil return line.for both the turbo side and the pan side.m6x1.00 is what i have found but is this correct?
i need the round slips that hold the panels that cover the rear speakers.would i be able to find a part at like kragen?if so anyone remeber the part number
low down
91 gst.88k all original.timing belt done at 87k
rebuilt ecu
8 out of 10 on the interior
8 out of 10 on the exterior
evo mani/o2(both ported)
xero mile rebuilt/clipped/ported 14b
3" TBE from dejon
walboro 255
reverse gauges
single pod w/boost gauge
all new shifter bushings...
well i just finished putting it all back together and when i started it i get white smoke.i did take the turbo apart to port it,maybe its blown???other than that it runs great?
the studs for my exhaust manifold were replaced when the head was done.for some reason the same nuts/washers were re-used.were can i find MONEL nuts and washers without having to buy a full set of studs?i also want to buy a couple standby studs for good measure.i have looked through our vendors...
i see that some people have done this.i was just going to cut and use some good orange heater hose.will this be ok?theres nothing other than hose clamps to hold it on.report back(pics would be wonderful)
i have the 14b off the car.i pulled the housing so i could port it.i noticed that the wheel on the exhaust side drags a little when i spin and push it in.is this normal?
the car i just picked up had sat for roughly 4 years.how would that effect the tires?what should i look for?the car runs great but seems to have a shimmy/vibration on the freeway.could it be from sitting for so long and not seeing normal driving?
i have searched using "fwd exhaust" a million different ways.i have yet to find what im looking for and i would really like to not have to go custom.i like the way the N1 exhaust looks.canister,slight upward angle and sounds(throaty).just the size of the cannister bugs me.im looking for a full...
im piecing together a full evo3 setup.i have the mani and o2 housing.the car needs new exhaust.so i figured i would just get my full 3" TB and be good to go come swap time.well the more i read,the evo3 o2 housing wont fit.from what i have read anyway.people say to just open the hole to fit but...
im looking at selling my cherokee for a pick up(to haul shit)anyway,i want to know what years had the solid axle in the front.im only planning on like 31" tires so i figure i could get away with a small lift(3-4")
im pretty sure that pre-86 and older had them.also,if any of you had the ifs in...
my GF has a 01 corolla s model.i need to know how much oil it takes.the damn oil light is on.i just changed the oil/filter and put 41/2 quarts of oil in it.she lost the owners manual so im stuck.any help would be great.
ALL i need to know is what automall(rosevilleauto mall or folsom)has a larger ford dealer.im heading up there in the morning and im looking to buy a superduty. :thumb:
my other vehicle is a lifted cherokee.ive noticed that my headlights are not pointing were they should be.i have a crap load of aux lights but still is not the same as a proper headlight.were would i go to get them adjusted to point were i need them?
Well i picked up my cbr600f4i.now i need a toy for the dirt.i used to have a 98 yamaha warrior.im looking to get another quad but i have been out of the loop for a while.
im looking at the honda 400ex,yamaha warroir,polaris scrambler(400 or 500)-not sure if i would get the 2x4 or the 4x4.it has...
just wanted to say nice car.you and your girlfriends were yelling at me (i was the guy on the bike)and noticed a lot of work had went into your car.PM me if it is your car :thumb:
well its a pain in the ass to put a new filter in my new bike so im wondering if there will be any benefit in putting one in.i have heard that stock is better then i have heard that a good filter makes a huge difference. :confused:
well i picked up a 02 cbr f4i for a killer price.its bone stock and i need to do the basics asap.i have heard jaridine,two bros,andsome yoshi pipes.what do you think sounds the best.i was thinking d&d :D give me any input
anybody have any seat time on a 99- zx9r?i was wondering how they rode,size in comparison to a r6.i want to step up in cc's but dont want a huge bike.
i could also use soem pics if anybody has them.im at work all the time and all i get to look at is the black and whites in cycletrader
well i have a 00 r6.its a blast to ride but i need a bigger bike and love the way the cyclone looks,plus at 1203cc and v-twin i figure it should have more than enough ass behind it to give me what i want.any body own one?got any pics?i wouls like to see some pics so i can piut them on my...
i need pics of any and all hot chicks you have on your compter emailed to my work.not work safe ok.i work grave yard and we all need a good laugh.there is a guy i work with that we have been messing with his computer putting all sorts of pics on it so when he logs on its the first thing that...
ok,so im startinfg to get back in to it.thing is i have not played for close to 4 years and there is a ton of different stuff out.
whats better a electric trigger or standard?
co2 or no2?
im looking at a couple different guns......dragun fire compact,e99 avant,spyder rodeo.i need soem insiton...
ok so i made a leak tester.now when it comes time to pressureize the system i was using a bike pump.the boost gauge will only climb to like 2 psi.im guessing thats not enough.should it hold the pressure??any ways at 2psi i heard nothing.im going to borrow my buddies compresssor and try and...
OK,CHECKED FOR LEAKS-NONE,CHANGED PLUGS,WIRES.STILL BUCKS BAD.now,my friend said while he was driving it it hit 20 psi a couple times.so i checked oput the timing andall is good.what would be casuing this??
well im thinking about buying a 4x4 truck/suv and i need some help.
my ideas for a vehicle are 90-95 ranger,90-95 s-10/blaser,89-95 tacoma
now,all of these will be a v6 and i hope a 5 speed.i just want to know what of these you have ever owned.things you loved,hated.this is real important to...
so i figured it was time to get rid of it.this is not a sale.just pm me if your are interested in picking up a 1g wing for your laser for free or a 14b that needs a rebuild for free.i tripped over the turbo and hit my head on the spoiler.:cry: any way pm me,first come first serve.make sure you...
well i have a 90 fwd turboi already have a set of new gr2's to go on.but im a little stumped on what will be a good choice in springs.i know the prokits are the ones a majority use.what want to know is who used x and either liked there choice and/or wish they had not.i want to know things like...
ok,it looks like ill be getting a good deal on a old knob afc.im not to big on tons of electronics in my car.anyway,i have a 190lph,blaha mas,and stock injectors running my big16 at 15#i want to tune it for 18-19#
trust me i under satnd that this is not the best way to go.i do how ever have a...
just wondering what kind of things i would notice as the fuel filter becomes plugged.mine is at 108k and its the original.any ideas or insite would be great.i need to get it running 100%
well the shop just told me that to pull the broken studs right they will have to pull the head.so now it will get new valves just cause and i figure i should put some cams in.i was thinking about the simple route of some 93 year cams.mainly cause of smog check for cali.what will work for me and...
i want to switch to mobil 1 10-30 full synthetic.problem is the guy i bought the car from only used regular oil(non synthetic)what problems would i run into?or would it be better to just keep using the regular stuff?
i need to really suck it up and spend soem cash on tune up stuff.
i need o2 sensor,knock sensor,assorted gaskets.just want to know who bought from were,how much or maybe what you have heard.have the money but would like to make it go a long way.:thumb:
ok,real quick.
the plugs are bpr7es gap .030
were the threadsend the the little arc thingy starts its burnt black and the arc thingy is white/gray.
now i figure its cause its lean(original fuel filter 108k)so that should be a majority of it.also there is no deformation at all.
i put a center vent gauge holder in w/only one gauge(for now)any way when i boost i see a light come on behind my dash then when i let off it goes off.what light is this?:confused:
well i took my car to satan cause i could not for the life of me get the filter loose.any way turns ouT 1)WONT TOUCH IT CAUSE IT IS THE ORIGINAL FILTER 2)original o2 3)original knock sensor
how bad will this hurt my performance?i have a big 16 and just not impressed.plus no cel.
i changed my...
i pulled my plugs today when i got to work(bored)any way one plug has a rather white spot on it.the others have a nice even tan/brown burn color to them.im running 15# on a big16,190lph pump.what gives?is this major?what can i do to fix it?
i have searched but have yet to see a good link on the...