I order a lot of my caps from Badcaps.net - Badcaps Home You need to be really careful when removing the old cap that you don't mar up the board and expose circuit tracks or tear them up. I use a hot air rework machine wth and ultra fine tip that only covers the two prongs on the back of the...
f it's just a project and you are definitely switching out to a better project, why spend that money on something you don't want. Unless you are planning on selling it because running cars seem to go for more money;)
well right now I guess I'm there because of this one part. but I have a lot of other things going on in life that prevent me from going out and buying a really nice turbo right now so a free one will have to work for a while. I would much rather have a better turbo. right now I''m researching...
I'll get there but I am new to this and for now what I have will do until it doesn't. I know my turbo is cheap shit, kinda why I chime into a thread about them curious to see how others are doing with them. one day I'll get something good, this is the only cheap or knock off part in my car
Funny how you say the questions were answered before I joined the thread. I didn't join this thread asking a question that came a bit later. my question was about internals and it was answered after I joined the thread hence it was my question. At any rate I'm done with the shit throwing, you...
and here I thought things ad turned for the better. Mr nutt hug is back and he's off duty. Speak as you please, but don't expect everyone to receive your bs and just roll with it. if you would give a lot less flack and a lot more help you wouldn't be wasting your time talking about big bad...
I'm going to solder my own cpu as i do that for a living on pc's. but wanted to know the best place for the dsmlink itself thanx manand yeah I'm looking for newjust ordered it from ecu tuning
this may be a dumb question but don't the 14b and 20g's use a different flange then t3? my manifold is for a t3 and I don't want to use the stock one for a couple of reasons.or do they come different, I'm not talking about the chinese versions
the site says they can do it for about 260 if i was reading it correctly. My thing is I already have this turbo and it didn't cost me, so if I get the proper internals in it then I should be fine. I haven't been able to find a 20g around that price. at least not yet
Funny how in a 100+ post thread I asked a while back about replacing the internals with garret internals which is offered by a couple of companies out there and no one responded at all. people on here are more interested in showing off, insulting, and circle jerking rather then thinking outside...
I guess no one reads that the car isn't being driven. nothing is going to grenade, blow up, go wrong, blah blah blah except maybe the battery. if I start driving this under wot and high boost then there might be a problem. I have taken in everything thing that has been said but it seems that...
I believe a lot of us have broken these rules but not all of us are moderators. You remind me of several cops I have had the pleasure of also pissing off. Must be the badge.
Moderators shouldn't belittle people especially if they actually "care" as it's been said. If they want someone to...
You're not making any sense to me. you are talking about adding 400hp to a toyota tundra with a supercharger, and you call that checkmate. Why would I care about a tundra with a charger? This doesn't mean anything to me. Perhaps you are a bit off topic. Pull your finger out and quit playing...
Let me set something straight for whoever can't read or comprehend. I didn't nt pay sh!t for this turbo. If I am to buy one I will buy something I beleive to be good but I don't mind testing a less then. I have a genuine walbro 255
so we go from DSM's to basket ball? If I whip mine out and it's bigger are you going to run home and search implants on the net? Skittles? you a little sweet?Dude just like it was just said. I have this turbo bolted up right now and I'm going to use it, don't like that? then buy me what...
I picture it more like waiting on the next person to insult so I can come up with something to throw back. Back against the wall? nah but I'm enjoying pissing people off who try to insult me
I'm not pioneering anything and never acted like I was. I did help pull my old engine and I helped with getting this one ready to go in and helped getting it to run. currently it needs tuning so it's sitting until
I think your perception is off. I complain of how a lot of people on here treat others if they don't buy what everyone else has. And for people who just have money handed to them just because it shuts daddy up. So they go buy what the people they look up to have and then turn around and start...
ever heard the expression it's not what you say but how you say it? if I don't like your attitude I'm not going to listen to your opinionsThanks for your life story, I'll be sure to give to the needy because of it. Teenagers with mom and dad's money can buy more expensive parts. How is it...
Use proper spelling, grammar, and punctuation when posting in our Tech Forums - don't use texting/instant messaging lingo here........ that is what the rules say. And I don't recall using internet shorthand, IM lingo or any kind of txt lingo. and this is also the hangout, not a tech forum...
so tell me how a free turbo makes worse problems? I don't understand that logic
I love how you are so close to my wallet I can't distinguish where my ass stops and your face starts. I own three cars which means two of them aren't a DSM toy. If you are going to join the circle jerk read...
yeah I''m kind of sick of the trash talk myself. I don't know nearly as much as the next man and do not claim to but my buddy is a performance mechanic who had always worked o my cars and he even told me that no they aren't as good and yes some of the fail but a lot of them work if you don't...
I'm looking into garrett iternals for my turbo. I may or may ntt find what want going that route. my car has a t3 setup, I don't really want to go back to the stock manifold. but I've got plenty of time to figure it all out. I haven't driven the car more then a block since Nov, and probably...
who said anything about being broke? when there are parts that range $300-$1500 and someone purchases the $300 part I don't call that broke, I call that a budget.so now one needs a grammar class to post? the only cheap part n my car is that turbo. the only reason that turbo is on there is...
yeah I'm sure the added pressure helped a lot lol what was stamp on it, just curious. I said I would never buy one but being it's free I'll try it. wonder if it's the same as yours. turbo charger ar .50 t3/t4 that's what can remember on it
nothing mean about your post, it's informative. I wish more people on here would stick to that instead of calling names behind a keyboard with their keyboard buddies because they didn't buy their dream part
lol you guys act like its the end of the world when someone doesn't run what you would run in their car. I know the turbo that s bolted up to my car is less then. and I chimed into a thread about less then turbos because of it. fact is my turbo didn't cost me shit. and as I stated before...
No. when the day comes that it fails I won't be blaming a DSM I will be spending money on a turbo. A good name turbo can still go bad and do as much damage as an off brand. I'm not saying the off brand is just as good at all, but they all can fail having a good name or not.
we just bolted one of these chinese turbos up to my 97, haven't tested it out yet but I've been a little worried on the longevity of it. I'm hoping to get at least 6 months out of it, we will see. I don't have any money in it so I figured what the hell. it's gotta boost more then my stock...
Thank you for the post with the schematic. at the time that I made this thread I was in the dark on a lot of this. I wasn't sure if there was a difference in a FCD per engine and I was looking for one for the 4g63 which no one has covered obviously because it's a bad idea that I now know...
with a stock ecu for a 97 model, what am i looking at spending for dsmlink?ok I just finished researching what i just asked. I found the sockets for $1.99 and I solder and desolder for a living so that part will be a breeze. and it looks like DSMlink will run me $545. will have to wait but...
I thought it was a pick up where he left of because of the economy type thing with ecu+ and that it was again going to be made and supported. So a gm maf and a translator. I beleive i saw the translator for around $200