I have a Clifford alarm installed on my 1997 GST and the keyless entry for the doors work and not the trunk.Did my car come with factory remote trunk release ? I would like to add this feature to my car using my Clifford remote.I know there are solenoid kits you can buy but it looks like I...
Hey guysHow many of you would be interested in using a Miata or S2000 battery instead of the little Odyssey ones ?The Odyssey batteries do not provide enough juice at times, and it gets annoying disconnecting the battery all the time if the car sits for a few days.The miata or s2000 is a...
Hey guys does anybody have these brackets kicking around or know the measurements of them so I can make them myself ? For reference, it is the vr4 front brake upgrade on a 2g.
I am having trouble syncing my palm IIIc with my laptop. It just won't sync for some reason. I have palm desktop 4.1.4 and a proper serial to usb adapter with driver installed.Can somebody help me out?
I bought this turbo at a good deal. I want to know if it will give me good spool and power on a 2.0. Its an Air Research T04B25 with 60 a/r, 65 mm turbine wheel, 53 mm compressor wheel, and twin scroll housing.
Hi there I will be going with either an HX30 or HX40 with a twin scroll setup.Just wanted to know who makes a divided turbine housing that will bolt on to these turbos?Should I go t3 or t4?A link to where I can get the housings would be excellent.Thanks.
I will be road racing my car, and it will have in the neighbourhood of 600 hp. Can somebody with roadracing experience suggest me a rollcage? Do I need a 10 point that goes through the dash or will an 8 point be sufficient for safety and chassis stiffening? Thanks guys.
I am in the market for a rollcage that is approved for roadracing AND passes faster than 11 sec.Can somebody point me in the right direction? Is an 8 point good enough, or will I have to get a 10 point that goes through the dash?
id like to totally drain my engines coolant and would like to know exactly where the block drain plug is or if there is an easier way to totally drain the 4g63 coolant.
All day i've tried to get her to start. She cranks but won't fire.I'm getting fuel but no spark so I changed the spark plugs, CAS, coil pack, mpi fuse etc etc. Timing belt and compression are good.I'm leaning towards the ECU and transistor now.Any thoughts?
I've removed all my emissions including the vac lines to the fuel pressure solenoid.I have the stock FPR and it has 2 nipples on it....where do they connect to?
I have a question regarding painting some engine parts.Is it ok to use enamel spray paint and clear on the fuel rail and cam angle sensor cover (I want to paint the green to black)?
Is it possible to blow blue if spark plug gaskets are leaking?The car has 165psi across all 4 but I see a leaky VC gasket and oil on the threaded side of the spark plugs.
Here's the situation. My car doesn't start and I needed to push it into my driveway. My friend was in the car and put the key in the ignition to be able to maneuver the car around.Well he broke something and now when you put the key into the ignition, it is very loose and goes to the...
HelloI have aquired a 1992 Tsi awd and it will be my project.My goal is to make an all around great race car.....be it drags, autox and road racing. I would like to keep the block stock for now and work with the head.I am mechanically inclined but I need input from people with...
Hi there I want to know the differences between the front of a 1GB Eclipse and Talon.I have a Talon and I like the look of the Eclipse front much more.
Here's the deal,About a month ago, I used MCCC (Mopar Combustion Chamber Cleaner) through my throttle body and soaked the tops of my pistons over night. I vacuumed all the carbon and liquid out in the morning after. After, I cranked my engine over to blow out some excess crap. Oil and spark...
Greg Cooleze 1GA downpipe:-Aluminized steel then ceramic coated (runs way cooler) and will never rust
-O2 eliminator
-Mandrel bent
-3 inchGreg usually does Supra stuff but I gave him my car to make me an exhaust, and surely enough, he made a bad ass exhaust system for me. My car was...
A local guy can make me an 3 inch mandrel bent o2 eliminator downpipe which is made of aluminized steel then ceramic coated inside and out. Would a stainless steel downpipe be better? I found one on ebay...
Here is my 1990 Eagle Talon TSi finally! All this was achieved by painting the whole car ofcourse, and then polishing it by machine with Poorboys and topping it off with an amazing wax called Zaino. Take note I removed my spoiler. All the holes were welded shut.BTW, the engine was degreased...
I'm putting in new speakers in my 1G and i'm using the stock speaker wire. I'm wondering if the black with white stripe wire in the doors is negative or postive? Also in the rears the speaker colors are orange with yellow stripe...and I don't know which one is positive and negative. Thanks.
I bought an Infinity Basslink and want to mount it horizontally by bolting it to the trunk floor. What kind of bolts/screws should I use, and shouldn't I have to fasten it on the underside with a nut? Thanks.
My 1990 TSi awd is stock with an awesome condition 14B. I have a Hallman MBC and a Autometer boost gauge. I'm really excited! What's the max boost I can run for now? Thanks.
I would like to buy a short shifter for my 1990, but none will work. I took the shifter and base from a 1992...is that all I will need or will I need the cables too? Thanks.
I need some experienced people to answer my question. My car is almost ready to come out of the shop, and will have a fresh paint job. What can I use to protect the paint? Or should I use anything? How long should I wait? Thanks everybody!
A buddy of mine did a quick dry compression test on my car. The engine was a little cold and throttle was not at WOT, I burn NO oil, my oil is always clean, and my valve cover gasket leaks. Compression is as follows:150
130
130
150I'm a little worried, and assume it's bad valve...
My car will be getting a paint job soon at bodyshop. I don't want a shitty job done. Is there anything I should tell the bodyman...like to take off the moldings first or anything? Also, I will be removing my spoiler, as I am going spoilerless :pHe said he would fill in the holes for the...
When I first go to start my car in the morning, I let it warm up. Then while driving, the temp needle creeps over mid way for a bit, and goes back down. I was kinda concerned. Could it be my thermostat?
This may be a stupid question, but I need to know nonetheless. Can you change your cams without taking off the timing belt? And I don't think this is possible but, can you change your cams AND cam gears without taking off the timing belt? Thanks.
I have a new alternator (90 amp) and new battery. Today I noticed when my car was idling, my wipers were not as fast as when I accelerated, and also my lights were dimmer at idle, but once I accelerated, the lights would brighten up. I have no clue why this is happening. I hope it's the battery...
My Talon has the wrap around spoiler, and the outside trim on the bottom of the rear windows is scraping off and also my windows do not go up and down properly. Is this outside trim connected to the rubber strip that the windows slide against? I inspected the rubber and it is cracked and not...
Which 6x9's won't I have trouble fitting in the rear: Infinity Kappa series or Reference series? Same goes with the doors.Also...What are the speaker sizes of my car? It is a 1990 Eagle Talon TSI AWD with the 6 speaker factory system.
I'm confused about what the best intake setup would be. Is it: 3" GM MAF with blow through setup, 2G MAF with blow through setup? Or no blow through set up at all? I plan on running a FMIC. Also, what's better for tuning, MAF translator, SAFC, or both? Thanks.
I did a search and have come to the conclusion that there are no short shifters made for the 1990 Talon. Well the posts are pretty old...so are there any current short shifters available for the 1990 Talon? I see the OBX ones on Ebay that come with a nice metal shift knob and am tempted to buy it...
Does anybody have experience with these? They are rather cheap for a coilover system. Any thoughts or comments? Thanks.Here's a link to them:http://www.hopupracing.com/apn1wospdasu.html
I purchased a 1990 Eagle Talon TSi AWD in September and have been tinkering with it for a while now. I have done quite an extensive tune up on it myself, all that's left is a full timing belt job (will be done within the next month). Need some input on my future modifications:-272 cams (will...
If i'm driving for a while, and shut the car off, and come back to start her up again, the car will idle pretty low, and sound like it's gonna shut off. It actually did shut off once, but I started it again fine. Anybody have any input on this? Thanks.
My HVAC lights don't light up anymore, they all just went out all at once, because they all worked before, then one day when I turned my car on, they weren't on. Anyways, is there a fuse I should be looking for?
I have a 1990 Talon awd. It's basically stock. Well ever since I bought the car, it pulled good in the bottom end, but then kinda dies in the top end (still holds boost), and turbo always makes this high pitched screaming. It's very loud actually. My friends can hear it from like 2 blocks away...
This is the story:One day I was driving my car and it started stuttering and finally just shut off (I replaced spark plugs and wires btw). After that I changed my battery and alternator because I discovered that power steering fluid was leaking onto the alternator, which killed it. The new...