Selling my 94 Talon TSi Auto "The Slingshot" .
Please READ THE BUILD THREAD HERE -- http://www.dsmtuners.com/threads/1g-auto-slingshot-build.460626/
It is currently taken apart, best way to describe this car is to check the build thread. Heres a list of parts. Anyone who knows ANYTHING about...
i have a full set of brand new Fiberglass parts still all boxed up for the 1gb. I will not ship this so it'd have to be picked up. They aren't making these anymore and their wait list if you could is over 12 weeks!!
Front bumper with cutout
Fenders, hood, roof, both doors, and hatch.
Insanely...
1990 AWD Tsi
New ACT twin disc setup, installed per instructions .Before I replaced the slave, I bolted the old one on and tried to use the pedal, and it made some creaking noises and the pedal would only return about half way. Put the new oem slave on, bench bled it jafro style, and bled it...
I've run into consistent headgasket issues lately and I was wondering if high back pressure could cause it to blow headgaskets.Turbo : 67mm Holset on a 12cm^2 Holset housing.
Engine - 6 bolt 10.5:1I am now switching to a 16cm housing but I first blew a cosmetic gasket on l19s at around 30psi...
My block is oringed with stainless steel wire and also has the receiver groove in te cyl head. I am up in the air still about headgaskets.The 2 I am considering is a solid copper SCE gasket or a stock mitsubishi composite. Unless I'm missing something.The sce copper seems to make the most...
This is for a 1g, but follow the same steps with a 2g and power probe the wires and it will work just the same .So there is a lack of info on the subject other than saying you ha e to use a tach adapter . I'm using a dis2 and of coarse am too cheap to buy the adapter, plus I didn't want all...
Hey guys, so after maxing out my 8 blade HX35, I wanted to pursue an option to build this up as a budget big turbo. I've run a few turbos from Turbo Lab of America the last few years (20g and 16g) so I gave them a call.So fast forward a few months and they received the new compressor wheel to...
So my 93 awd w4a33 trans doesn't have overdrive. It's not the typical slipping when in od, this just doesn't even try. Has every other gear . It just stays in 3rd no matter if the OD switch is on or off. Switch is showing off or on correctly on the cluster . Just installed new end clutches just...
Here's a little compilation I made last night. Fresh off the 1/4 mile from this weekend. Set out to break the bolt on hx35 record and did with a 10.8@126!Also check out my other footage from streetcar takeover Houston a few weeks ago, raced some fun cars!
Like and subscribe to keep the videos...
Went to the track last night, even though it was 85 degrees and crazy humid, still ran a new .55 ar bep bolt on hx35 record.94 talon awd
Stock auto kiggly manumatic wiring mod
Welded ctr diff
8 blade hx35
Bep .55ar bolt on housing
Gsc s2 cams
Magnus v1 smim
100% stock 6 bolt block, stock...
Here's a little pull I made behind our house the other night.
Hx35 8 blade
BEP .55 ar
Stock block/hg and all from 1990! Standard arp h/s
Gsc s2's
All season tires
Auto 50 shot dry to spool.I did hit the limiter each gear for a second but you get the idea.Any guesses on what it'll run? We...
Need a little help here guys.Had a short in the wiring and it started a small fire while driving! It melted all the wiring on top of the sending unit and I need to put it back together. If someone could tell me what colors go where, from the connector on,
I have a yellow/green, black...
I am switching to a Holset h1c hot side for my hx35 and I am wanting to know what size v band flame I need to get to match up when making my custom downpipe. Anyone have experience with this ?
Ive had a lot of people asking me about stalling the auto and how the nitrous does with that so i made a small comparrison video. Let me know if you have any questions read the description it has more details.
This is on an IPT restall converter and a 8 blade HX35Auto DSM Launch No Nitrous...
So my CAS plug snapped off and the wires came out now I have no idea what order the wires go in . could somebody look at theirs and let me know the order. 2 blacks a red and a white.Thanks
So we are talking 6 bolt shortblock here. What would you do, what parts would you use to make it as strong as possible and why?
6 bolt Block, 6 bolt head. Auto trans. Drag only car.Fill in the Categories below and why you would use or do that.Crank (stock stroke, 100mm, Eagle,?)...
NEW compilation video. You're probably sick of the car but who cares.
TX2K13 Cody's 1G Talon Compilation - YouTube
We were having a little fun making the video...
But the car is slow, this is not a call out...haha
So, in July 2012 I bought a 1994 Eagle Talon TSi on here in the classified section.
The car was in Michigan so I had the seller drop it off at a friends house in Chicago, then I took a uhaul trailer and went to get it. Moral of this story, never buy a car that you havent personally looked over...
So I have the single piston calipers up front and my braking is ok but staging the auto, I easily push through the brakes! I was really interseted in the VR4 fronts, however i dont know if they will fit my FD wheels?? Reading on the Evo forums, i noticed they get their factory Brembo's to clear...
Barely got the car ready in time, but in the end everything worked out and got the car dyno tuned a few days before TX2K13!The car made 327whp and 399.8wtq on a mustang dyno through the auto and AWD.
I wasnt too impressed with the dyno numbers but i knew the car pulled good on the street so...
Got the car dyno tuned and made 399.8lbft of torque but only 327whp
This was on a mustang dyno.
1g talon awd auto
Stock longblock arp head studs
Dsmlink (no log)
8blade hx35
28psi
E85
Fic 1050cc only at 70%dcWhat could be causing this ? Torque curve really drops off quick! Tuner...
So i wired everything up except the wire for 4th into a switch and was going to try it out and my car wont engage the starter. I cut the harness like the picture and connected only the wires needed. I took the black with yellow and connected them into the wire that used to go to the starter butt...
So I am having a hell of a time finding a used w4a33 so i was going to see if maybe its something simple that you guys may have heard of thats wrong with my current one.History, bought this car from somebody on here and EVERYTHING has had to be replaced. I have built up a longblock to go in...
So my W4A33 is acting up and rather than pay 2600.00 to get it rebuilt right now i found a JDM engine importer that had a W4A33 in stock. Went and picked it up for pretty cheap and looked at the connectors and it doesnt seem that they are exactly the same.I emailed John at IPT and he said...
Ok So my spare motor just got a rebuild and i am installing the new timing belt, As i understand it, i need to set the timing to 5 btdc off the Timing cover?Also the new engine has a 90 CAS, and my car has a 94 CAS, So i am going to have to swap over the 94, am i wanting to set up the timing...
Need to get my new setup tuned. I keep hearing F.I.S.T but ive heard they arent doing it anymore? Anybody have any info on this? Or who else tunes Link in houston?
Couldnt find a detailed writeup on the kiggly shifter mod. Anybody have pics of the install?
Where is the small plug located? At the base of the shifter?Thank You.
I am wanting to put a ratchet shifter in my 1g and had a few questions.1. I was planning on following this guide http://www.dsmtuners.com/forums/automatic-tranny/290705-how-install-ratchet-shifter-dsm.html
and buy a Hurst Promatic 2 Ratchet Shifter but i wanted to make sure if i install the...
I am installing my LC1 Wideband and i followed the steps on ECM Tuning and wired it to the O2 wire(white). I "T'd" in all the wires into the wiring harness about 3 - 4 inches from ecu plug. Am i supposed to cut the white wire instead of "T" in the LC1 Wire? I got it wired up and did open air...
I am having a problem when i am building boost (only when i go WOT out of boost) as it builds it cuts out and sputters for a few seconds then runs great. Looking at the A/F est you can see when the car is sputtering as the a/f is all over the place while the car is building boost.I have...
So i tuned got my idle and cruisewhere its supposed to be, now i am tuning WOT
I got my afest to about 11.0/1 (it was 9.2) but i am having it read lean (12.9/1) until i get into boost?2nd I am getting some knock but it seems if I adjust MaxOctOpenLoop table (tracking datalog) it makes the...
Hello everybody.I just took possession of dentedcoffie's 94 talon yesterday. Ive been looking for a 1g auto for some time now but down here in Houston, it seems the pickings are very slim. So i found dentedcoffie's talon on here in the classifieds and everything worked out great!. He dropped...