Speed density harness $40+ship (2g to GM ait&AEM map- NOT for OMNI sensors although I have an Omni pigtail I can send free of charge.)
SOLD- Flex fuel harness-NEW(plugs into the SD harness)
6bolt in a 2g harness $50+ship
FIC hi-z injector harness adapters $30+ship
FIC resistor delete plug...
I'm going to show you how to hard-wire your SD kit and Flex Fuel sensors instead of using an adapter harness for those either redoing their engine harness or you simply don't have the funds for the adapter harness.There was very little information on MAF wiring that I could find but maybe I...
Here I'm going to show you how to upgrade your fuel pump housing feed line to -8an and your return to -6an and install an Evo fuel siphon in your 2g DSM.Why would you want to install the evo siphon?
1: You're upgrading your return line with a bulkhead which will eliminate the hardline that...
I’m upgrading my -6an feed, oem return to a -8/-6 setup.
I installed a -8an and -6an bulkhead which is why I’m installing an Evo siphon since I can’t use the dsm o ring siphon.
I had my dsm siphon drilled To 1/8” I believe with a Walbro 450 and fuel pressure was good on my hx35 93 pump 30psi...
https://www.dsmtuners.com/threads/how-to-depower-steering-rack-manual-rack-conversion.529792/Here is a discussion thread for my manual rack conversion tech article.
Let me know what you guys think and if I need to change anything.
Hopefully it helps someone out as the other threads I’ve...
Here I'm going to show you have to depower your steering rack or convert it to a manual rack.
I did a lot of research, looking at every tuners thread, Facebook, YouTube, etc and the information is very scattered and no one has a complete thread that's easy to follow with good pictures so I've...
So I’m in the process of making a very in-depth tech article on depowering a 2g steering rack to post and ran into an issue.
When removing the retaining pin, it looks like only half of it came out but I’ve rotated it and don’t see any piece of the pin left and yet it won’t release.
Here is a...
So I made probably the dumbest mistake I’ve ever made today on my dsm...
I accidentally cut off my siphon hard line instead of the return line when attempting to upgrade to a -6an return.
Now I’m trying to decide the best course of action to fix the problem.
There aren’t any 90 bulkhead double...
Just thought I’d post some pics of my GSX that I keep digging deeper and deeper into.
Does anyone else get this OCD when cleaning?
Also wouldn’t mind suggestions for paint protectant, mainly for the hatch channels where water runs down.
Ignore my wiring as I’m redoing a lot of the harness and...
1998 Mitsubishi Eclipse GSX
5 speed
115k miles
Clean title
ZERO RUST
Located in Kingsport, TN
$10,000 FIRMThis is a feeler post because I’m considering buying a second home and don’t drive it that often.
My price is firm, I would not take a penny less so don’t waste my time.
This isn’t a...
I have a set of red talon twisties for sale.
They need repainted but don’t look too bad.
My price is $125 FIRM- I am willing to ship but expect shipping to be $75-125.
I am located in Kingsport, TN.
I’d be happy to trade them for some red 2gb eclipse side skirts in good condition w/ good...
Delete if not allowed...I have a Mishimoto radiator that was included with my Evo 8 when I bought it.
Ended up selling the Evo and never had the chance to install it.
Might fit a DSM if you cut and reweld the lower flange.
My price is $100+shipping and fees.
This price is FIRM.
Text for...
Im looking for good condition, 2gb sides with good oem paint.
If you have what I’m looking for, message me pics and info.
I can buy them or trade talon twisties or white 2gb sides for them.
If you want to purchase my twisties $150+shipping&fees- no broken tabs or scuffs.
Thanks
Like-new cop setup with jm fabrications billet cop plate ($100 alone) and includes new wiring harness that was on my 2g.
I switched back to stock coils/wires for ease of swapping plugs.
I ran this setup for maybe 300 miles with a dynatek arc2 and ran great.
Sold the arc2 already- now just...
Like-new cop setup with jm fabrications billet cop plate
Includes harness wired in parallel along with a second harness to wire them in series if you like.
I switched back to stock for ease of swapping plugs.
$200+shipping and fees FIRM
After doing much research, I wasn’t able to find much information on wiring 300m coils in parallel, all the DIYs are in series (wasted spark).
I’m not going to go into details on why you would wire it in parallel vs series, but here is how it’s done.Wire all the lower pins of the coils...
All prices are shipped.
Buyer covers PayPal fee, so add 3%.If you’re broke and needing to wait til next pay check, don’t contact me.FIC 2150s $690 (new)
Customer purchased and decided to go a different route.HKS to 2g bov adapter $20Injen plug cover $40
Needs repolished6 bolt NPR...
I'm going to show you how to install a fuel pressure sensor and log it with ECMLink.First off, I was going to purchase a name brand fuel pressure sensor but after talking to a few people, I just went with an el-cheapo off eBay.
Just make sure it's a 5v fuel pressure switch- I went with 100...
Here I’m going to show you how to install a Walbro 450 fuel pump with an STM bulkhead fitting.Reason: The 450 has trouble with the feed o-ring seating when installing which causes lean condition at WOT, this eliminates that issue.Product links:
Walbro 450...
Greetings all,
After searching and searching and multiple failed attempts for help on Facebook pages, I’m looking for advice on my COP wiring with CDI.
Parallel vs series-
I ordered a cop kit and it is wired like this:
While all the threads I’m finding show to wire them like this:I...
My price is firm.
No I will not take any less.
No I don't want your trade.
Please don't waste my time:)I have a brand new, never installed, JMF race intake manifold for a 6 bolt/70mm TB.
This is the updated SMIM with billet runners.
I'm wanting to upgrade to their all billet intake...
Brand new, sealed set of King XP tri-metal rod & main bearings for SOLDNew set of NPR (Nippon Racing) standard sized 6 bolt turbo pistons w/ rings.
They were only removed from packaging for pictures.
My price is $100+shipping&fees.Reconditioned 6 bolt rods I purchased from Justin Whitesell...
Ok so long story short I picked up a Evo 3 16G locally and he had an intercooler with GReddy piping he threw in for an extra $50.
The only thing is I can't find out what kind of intercooler this is.
I've looked for a while so maybe one of you will know what kind it is.
Thank!
Hello all,
I bought an eclipse off a buddy of mine a while back, it ran good for a while until recently.
I was on my way to work one morning and it felt like it was missing when I came to a stop, then when I got on it, it started hesitating anything over half throttle once I hit 2.5k RPM, it...
Hello everyone,
I recently purchased a 99 GS-T (stock) and have purchased some parts for it.Here's a list of mods I've purchased:
Injen intake
Ported exhaust manifold
VRSF fmic
TurboXS BC(IR boost solenoid on the way to replace)
HKS BOV (venting to atmosphere)
Evo3 16G
Full 3" exhaust o2...
Hello all, long time lurker here.
I've searched a lot of forums for the answer and have tried everything I've read.
Nothing so far has worked and was wondering if someone could help.
I have a 99 eclipse gst with a black box ecu.
It has a remanned jasper engine in it.
I don't have a cas on...
Eagle Talon TSi Help - YouTubeI finally got the car running great. I put it on craigslist, found a buyer, and he came and looked at it, drove it, car ran perfect.
The next day I had to work til 10pm, I told him to meet me after that.
He showed up at my house at 8 and my stepdad was there...
Alright, I finally got my car running, now to do the taboo vacuum line diagram.
I'm a little confused as of which ones to block off since it is a 1g tb on a 2g.
From what I can understand, I need to block off all 4 vacuum lines on the very left side.
T in the FPR vacuum line that goes from fpr...
I'm looking for the bolt size for the TPS sensor, when I got the car it only had 1 bolt holding it in and I manage to drop it in the engine somewhere and couldn't find it. So does anyone know the bolt size or part number for it? thanks
(It's on a 1g TB if it matters)
Talon pictures by PuNk3rz - Photobucket1995 Eagle Talon TSi, AWD, 5spd, 140kI just bought this car for $500 because it wouldn't run and the owner couldn't figure out why.
After checking the fuses, the main 100amp fuse was blown. I believe this is what was causing it not to start...
Well, first off I've had about 9 eclipses/talons but they were all n/t.
Yesterday, I picked up a 95 Eagle Talon TSi AWD for $500.
He said it will crank but not turn over...
After getting it home, I pulled the intake off and looked at the turbo and it has some up/down and left/right shaft...