I have for sale 3 ecms for sale, all from part outs, believed to work'92 eagle talon tsi ecu with aem add on
'94 eagle talon (trim unknown) junkyard tested good
'92 Plymouth laser Rs ecu junkyard tested goodLooking for $125 each
9O8-33FOUR-97FIVE4
So i took on a 92 talon tsi awd as a project. I spend day in and day out for a long time fixing this thing and got as far as getting it to idle at ~900 steadily. It runs but needs work such as :-Trans work, will catch gear but bogs a lot, a lot of smoke has been coming from the trans area...
searched and searched to no avail. im looking for a how-to hopefully with tips on how to do this on a 92 talon. im having an extremely hard time removing the linkage out of my junker and cant imagine the linkage in my project with full interior and the engine actually in the engine bay to be...
So I replaced my ECU so the car would actually turn over, but now I have another problem. When I start the car, it revs to 3-4000 rpm then dies immediately, cant get it to stay on for more than 5 seconds if that.Please give me a starting point :confused:additional info: ECU has AEM(?)...
So I've searched and searched and searched and still have questions. The contacts in the MPI relay, are they both supposed to connect? Only one of the coils is making connection on crank.Also would that prevent the car from starting? Thanks a lot
ive replaced the isc, tps, adjusted the tps, cleaned the tb, and im stumped. i start the car, the rpms stay extremely low and alomst stalls until i give it gas, then i drive it and when its idling, the rpms stay at around 2k. then a few minutes into the drive itll surge between 1.2k to 1.7k. i...
i was driving to dunkin today and ive been driving with this code for a couple days cause it didnt seem like anything was wrong... but the cars rpms went nuts then the car died and i couldnt start it since. checked the isc and it looked fine. researched the topic and couldnt come to a conclusion...
i now have two new problems; snapped bolts:one in the turbo inletand two of these in the headi would definitely not like to take apart the turbo and bring it to a machine shop, who can help?
Symptoms:
Backfire-like sound when I let off the gas
Won't hit full boost when it shouldI read somewhere that if there's a hole in a gasket, the air escaping will burn a hole in either end of whatever the gasket is sealingThis leads me to believe its in the exhaust manifold, hopefully...
so around 3 months ago i had a leak from the oil filter that i did a bang up job on repairing since i was in seaside, very far from home. i sprung another leak today and i assumed it was the oil filter until i changed it and chANGED the oil and i thought i was done. i saw no leaks. then i turned...
In currently running an evo iii 16g turbo and a big ass vr speed fmic, but I'm changing my 2ga bumper out for a 2gb bumper and would love to install fogs... Only problem is that apparently Vrsf doesn't allow fogs, and I hear punishment racing does. So two questions, I found one that was...
I have a couple problems in my car... Recently when I'm driving and I turn on my brights and it seems like all the electronics in the car reset. Also when I turn on my turn signal the lights in the dash dim when the signal turns on. Also when I'm idling the lights dim until I start driving when...
i was driving home from seaside today and the abs light came on, i didnt notice anything wrong so i *carefully* drove home and when i went to turn off the car i noticed a noise from the engine bay. it looked like it was the abs module in the lower right hand side of the bay but i couldnt be...
I've tried to research this topic and haven't found a Definate fix... I replaced the altenator belt and tightened it a much as possible... Only happens on cold start, help please :(
I have the paint code for my car (P01)... Paint scratch has this but they also offer hand matching... Is the hand matching worth the extra 35 or will the code matched paint work just fine?
ive had the ECL on since i bought the car and i finally got around to reading the codes and this is what i came up with:p0136
p0141
p0100
p1400im running no cats, and i believe he said one was a bad map sensor (maf sensor?)please help idk what these are