Where can I get an oil cap like this?

Thanks guys, I appreciate it ;)

I did searched for a more appropriate forum to post my question but could not find it, sorry if I´m mistaken... So has anyone bougth from this online store? is it reliable?Discount Mitsubishi Parts - Genuine OEM ReplacementIf it is for real, I think it is greatI was looking for a...

Any of you guys know what would be the kit most compatible with dsmlink? Devil's own or AEM? or is there another... and anyone has an image of a diagram for this set up?

I got some bad connectors on mi car, and when I hit 7000 rpm in 3rd gear or so... some of them come loose, specially the one by the spark plug coils. When that connector gets loose my car will do the same that you are saying... I need to get mine fixed...check that all of your connectors are...

hahaha I think everyone is entitled to their opinion or way to do things, even if it is wrong hahaha :cool:I personaly hate the talon wings, bot high and low rise, and also the eclipse low rise wing, and it does not mean they´re ugly, its just that I don´t like 'em...And I know the parts...

NICE! I have a 95 talon TSi and I bought it with eclipse gsx 2gb conversion, and eversince I got it I keep thinking on converting it back to talon 2gb or a kind of hibrid with custom body kit that resembles the offspring of a talon and an eclipse... anyway if I do it I will post it

I'm listening hehe even if it does not look like... I'am aware that i don't know, thats why i'am asking... and no one is being rude, I apreciate that.so that will do it? can you also advice me in in wastegate, blow off valve, bost controler, and water meth? to run with this turbo and...

=D haha landspeed....And wes393, it seems to me that I am getting closer to find the right turbo, now I know it has to be one with realy high flow rate and be efficient... now, what turbo will do that?And I´am thinking that a racing thermostat (with lower open temp) and a radiator are...

Because it seemed like a good option it flows air realy steady acording to some dyno sheets I saw and given the fact that I am going to run low bost level it was a good option, but I sarted to think bigger....hehe well the thing that got me is this.... kind of find it hard to explain but...

You are reving to 9250?? OMGAnd I got possessed by curiosity, I want to squeeze the 10.5:1 CR, I kind of think I can get better results on a higher CR, even on pump gas due to fuel eficiency and some other calculations that theoricaly give you an advantage.... and if it does not work I may...

:cry: Seems really expensive, my three options are under $1000, how much you got it for?LandSpeed-DSM I know they are really diferent turbos, but thats what I have considered...Yep, i have in mind a really fancy headwork in the future. I apreciate your sugestion, but won´t a large...

Yes I'm aware of the need for tunning thanks, and I did updated my profile a few secs ago... I am currently using pump gas but I plan on using race gas on special days ;) And I know 500hp is a lot to ask for quick spooling but I want the quickes spool that I can get for that goal ( i mean full...

Hi guys, so I have rebuilt my engine (7bolt) with wisecos 10.5:1, manly rods, (stil a 2.0 lt), cometic head gasket, ARP bolts, and some new oem parts, like water pump and piping, poly motor mounts and some front suspension new parts (like almost all!)Anyway, my next concern is a quick...

Is this post dead? Come on! I wanted to know about the numbers that you got

i installed my motor mounts 2 weeks ago, along with timing belt components and removed harmonic balances... car works perfectly =D vibrations aren't bad

black it's always the best option =D

Don't worry, I'm Fine with the vibrations

thanks guys, I got paypal and waiting for some prothane mounts =D

I wish to improve off-boost power and build a bad ass engine so I can put a big turbo on it afterwards, am I doing it right?

jtmcinder, sorry but I don't know what do you mean by a "1.5-way in the rear"I'm making my wish list for an all out car, and i want to use it on the drag strip, it might be a little dreamy but I'm expecting to have ready my car in a few years, i already know what to put in the engine and...

It's pretty nice =D

looks pretty good I think

Ok, as for now, the goal is to have a quaife lsd dif, because it will be needed for autocross or drag racing, so don't worry about future plans on power or application guys,, my concern here is not to buy useless things, as a stock viscous dif that I don't want and maybe don't need...Lets...

Do I need to do that? I don't want to get a viscous stock dif, I want to get a quaife one, my question is: Will it work on my non VLSD rear end???

I want some advice, I am making my wish list for my car:Currently no mods, all stock 95 talon tsiMy car has the non lsd rear dif, and I am planing to get a LSD rear dif in the future, a quaife if its possible, the question here is:Do I need to get just the new LSD dif core? Or it will...

In my opinion go with solid black, I'm a huge fan of black wheels =D nice ride by the way

Good to know, I won't be doing any business with them...

i dont recal the dimension on my wheels but i do have spacers on my 95 tsi and it is not been a problem never, just as if they were never there, its a 1 cm spacer

when your motor sounds like a diesel truck, then it is a timing issue... i agree with guys above about timing issue, check it

nice build, and is she running now??? i cant wait

hey i need the strut towers because the ones on my tsi are ####ed up by rust, do you have em? can u sell them?

so you dont recomend cp and wiscos??? i was timking of these ones..http://www.extremepsi.com/store/product.php?productid=23353&cat=1098&page=1

thanks BogusSVO, and i am thinking of upgrading my internals, with some forged piston and rods, can anyone recommend?

hi everyone, newbie question here, would this crank fit my engine: is a "Manley Performance Forged “Race Series” Crankshaft (100mm): Mitsubishi 4G64 (2.4L) 7-Bolt #22686" here is the link EXTREME PSI : Your #1 Source for In Stock Performance Partsi have my stock 4g63tand i want to...

thanks guys, i appreciate it, no more questions =D

wow, thanks, that was fast =D and i will do that, now i just need to find out where they sell that...

hi guys I, got this dsm a few weeks ago, and it has been filled with sink water instead of coolant, checking the thermostat outlet it seems like everything is all rusty, i haven't open the engine, but even a new water cap i installed got all rusted in a week...i am thinking of replacing...

its an awesome job! its really hard to believe but congrats... and i wanted to ask, how did you cut all the wiring? i mean, did you used any diagrams? manual? or just by experience and testing the cables? if you used any help, can you share it please?

thanks ozone302 i will check, and why you say they are better? i'm not arguing, just want to know your point of view

if u have plans for a lot of psi, lets say more than 18 go with a mechanical, they are more reliable but if you are going soft on the psi go with a cheap one, most bc work fine for stock turbos and electronic bc looks great

thanks guys you have been really helpful, i think I'm getting the pay pal... now i just have to find some trustworthy online vendor

i will advice to go for a new one, it may cost a little more, but you can be sure that it is gona last, bcause the one in the pic is all rusty... used parts are great when you are totaly sure of what u buy, but if u have to ask i will advice to get a new one

thanks guys, and well its just that i don't own ccards and i like better to see at a store what i am looking for so i wont be fooled, but i wanted to try, maybe someone knows... if not just gotta have my brother to buy em for me

Hey guys, i need to change my motor mounts, i want to get polyurethane, the problem is that i can't order online, anyone knows where to buy 'em at el paso tx??? i am thinking of some prothane ones but any other poly mounts will doi got a talon awd, the one with 4g63 thanksand as i said...