the ecu was chipped by jeff and it didnt show signs of having a tach adapter board. it ran the car for a while but was impossible to run with a 2g mas. only way it would run it with a maft setup. I just got my original ecu back from ecmtuning fully repaired and as soon as i plugged it in the...
Just found out ongreenperformance ripped me off the ECU is a 91-94 i should have seen it cause i was getting fuel trims outside of 60 to 120. They sold it to me saying it was only ment for 90 models car only. I am running this ecu with a maft setup cause if i try and run it with a 2g mas the car...
Im gonna try to make it new ecu gets here thursday cost me $145 to have the whole top and middle portion of the board replaced from ECMTuning. Car should running like a beast.
looked at the ecu super close two traces are scratched pretty bad, inbetween the capasitors, i think this is my problem. new ecu is coming in 2-3 days, the whole problem started when i switched ecu's, so i rulled out ignition or fuel pump rewire, maybe they got scrathed when replacing the caps.
No the relay lets go as soon as I unplug the ECU, and yes I have a multimeter and know how to us it. Hopefully the ECU I get soon will solve things Im not ruling the ECU out just yet till i get this other one and if it is the ecu ill just have to send it to ECMtuning to get it fixing.
Have read ever thread on mpi relay and nothing has helped I'm not having the problem of no start but rather the problem of a dying battery because of the mpi relay. It won't shut off and is causing a parasitic drain to my car. I have verified this with multimeter and pluged mpi relay in with...
If you part out I wanna swing by and see if I need any thing, them wheels look pretty nice and how are the tires. I would swap and some cash your way, oh and does anyone have an afpr for sale fittings and everything, let me know before i just end up buying one off maperformance.
Jeff is the one who made the chip and yes the MAFT is set for 450's so the ecu can do its job, but i have the MAFT set to emulate 2g mas, and it runs just fine.When I go to log this what should i be looking for to tell what the problem is.
Okay I recently changed my MAFT Setup to a 2g Mas because i found out my ECU's capasitors leaked and ruined it. So my new ecu can chipped for evo9 injectors and 2g Mas. I already had the evo9 injectors and was using the MAFT setup to compensate for them but now that I got the 2g mas in, the car...
Hey drivas I'm curious to see your 20g setup and what your puttin down what ECM are you running and injectors, and how much psi is that 20g putting out?
I am about to do the same, I just got my new ecu you yesterday cause i found the capatitors decided to go boom burn marks on the inside of case and all over that area on the board. So i got one rebuilt and caps replaced and socketed with a chip from Jeff set up for evo9 injectors and 2g mas and...
I just got a new ecu that is chipped for Evo9 560cc injectors and 2g mas. I have a Maft setup with a 3" GM MAF and Evo8 560cc injectors, what should the settings be so the GM MAF will emulate the 2g mas? This is only temporary till my 2g mas gets in so i wont have to fool the ecu.
I updated yesterday no afpr just yet its on its way and im running evo 9 560cc injectors nothing fancy.I have alot of the same mods besides exhaust and ecmlink, plus my motor is built besides cams. My new ecu should be here monday and its chipped by Jeff at keydriver to be set up for 2g mas...
Okay just added MAFT setup and Evo9 injectors went for cruise to set base and when trying to go for WOT RPM's went crazy and got stuck at 7k first time and 5k second time had to shut car off right away and reset ecu and pull IAC plug off and plug back in to bring idle back to normal. Car runs...
Yea I gutted all that shit out off my car and it's sitting in a box in the back of my wife's car, need it gone ASAP 100 bucks for everything all the heater stuff is there to I'm pretty sure.
Tell him Jeremy sent you if you bring all your own parts the labor should be no more than 450 maybe 500 and it should only take a couple daysDoes anyone know where an AWD dyno is in Hawaii after my car is all together and running smooth I wanna see what my numbers are shooting for 20 pounds of...
My mechanic is really good and reasonable complete timing belt job wouldnt be to much an depending on how much you value your time. His shop is AC AutoTech names Andy, he put my entire car together. He's town side so guess your gonna have to tow to idk you might just do it yourself not to hard...
None at the junkyard don't see people stripping that part off as much.Leo is your buddy going to grab my AC parts cause I'm about to junk them taking up space as for 1g parts I'm trying to get rid of I have inner and out tie rods brand new in the box I have some mt90 tranny fluid top of the...
Does come off during high revs or just idle little bit more info. And are both bolts in the people usually leave the back one out cause its hard to get to.Both bolts on the pulley bracket, sorry should have clarified that.
If your selling it for parts let me get the 2g maf and intake my GM maf and translator is pissing me off running rich and can't seem to fix it let me get them injectors too.If I can find a 2g maf I'll have an entire GM maft setup for sale I don't have the patience to tune that damn thing will...
I bought my gsx from some guy in waipahu for 1800 thing was jacked up under the hood, outside was a 9 and interior a 10 and it ran but i dont know how long it would of made it. 1 month later fresh fully built motor, new tranny, and new evo 3 big 16g turbo pushing 17 pounds. you will definatly...
Looking for 90 EPROM turbo ecu ASAP preferably with caps replaced/done right!
Also looking for a S-AFC!
If anyone one has an ecu with ecmlink would take that as well.
Same here have a spare 22 spline transfer case and all the AC components for 1g I'm trying to get rid of also have inner and outer tie rods brand new in the box and some mt90 tranny transfer case or differential fluid it's some good shit would put anything else in my tranny.
Its not pouring in Honolulu or more Waikiki side, I just posted pics of my ride tell me what you think picked this car up from some guy in waipahu two months ago for 1800 and had pretty much the entire car torn apart and replaced everything.What do you mean your GSX is down for the count what...
Im going to go cruise today if you wanna see what I got maybe go for ride, I have to go pick up a fitting to install my oil pressure gauge at some place by the airport sometime today. Nice day and no rain so I will definatley be out.
With everything thing I have right now I am trying to get rid of my stock MAF sensor and intake I have on the way a MAFT and 3" GM MAF to do the trick for right now until I have the time to send in my ECU for DSMLink. I want to run 18PSI without hitting fuel cut so also on the way next week are...
I am new to the DSM world and just got my 90 gsx out of the shop after having the motor completely re-done and tranny as well. Looking for others in Honolulu or anywhere around here who have DSM's and would like to cruise and help me tune my new fully built beast.