Ok i seatched and couldnt find what i was looking for. im trying to install dsmlinkv3 into my mirage thats running a 2g setup. I cannot find a pic or anything to tell me what wires go to what for the map sensor and air temp sensor. the only thing i could find was somthing that told me what wires...

Ok i need a bung for a gm style air temp sensor made out of steel. anyone know where to get one? i need one kinda quick let me know thanks guys

Ok long story sort i have a 99 mirage. had 1g setup wiring harness and motor trans. I am sawping over to a 2g wiring harness for emissions. I have a 91 awd trans in the car. Can i just swap in a 2g speed snesor and be done will it fit? if someone could give me a good answer it would be great thanks!

Ok make along story short. I have 99 mirage 4g63 swaped. Friend i bought it from put 1g harness in it. I cant go threw emissions. I am in the works of puting in a 2g harness setup in now. few questions first one the 1g harness there another sperate that goes to the starter. is this the same on...

Ok heres the story. Ive got a 99 mirage swaped with a 4g63 in it. As we all know 99 should be ob2. Well this cars got a 1g engine harness. My plans are to swap in a 2g engine harness and possible interior harness. one main question i have is. if im wrong someone please correct me. 1g trans and...

Ok ive ben thinking of running an honda half sized radaitor. i wondering whos done it and how good it works on the streent? also i wondering if theres any other half that would thats the same size with and height but thicker? My cars a 99 mirage and i cant run a talon rad its a tad to tall...

Ok I went to the dyno yesterday i made 368 whp and 299 with 25 psi and im kinda disapointed with the results... but it was burring out the entire time as well.... ill upload the graph later today

Alright ive ruin into a big problem.....i currently own a 99 mirage 4g63 swaped! problem car was wired with all 1g stuff engine harness and exerior harness for headlights and such. Other problem emssions. can not pss no ob2 port. I got around it for 1 year and thats it. the reason im asking...

Ok guys ive got a ob2 port here. I need to know what wire is power and ground. i just need the port to power up the car has ob1 wring soi cant go threw emssions. I just need the port to be powered up so it can fail. I have away around passing just as long as it fails. they can not fail it...

Ok to make a long story short i have 99 mirage with a 1g setup so the car has ob1 in the good old stay of ct the car HAS to have an ob2 port. i cut one out of a 200 eclipse. heres a pic of the plug. all i need to do is get the port to read and fail. i need the car to fail and ill be fine i have...

Ok hers a pic so you know what im talking about. this should be a 3 wire correct? ground singal power? if so where do i ground it to one of the nuts on the outer side? i want to connect it to the stock wiring so it will work with the stock fuel gague thanks for the input and help!

ok ive got a ptt twin disk and it lost its clamping force. i was thinking of rebuilding. ive heard so not so great things about the ptt and ive heard some ok things about others. so what im asking for is user experince. good or bad. also anyone have one rebuilt? they told me 500 i believe in an...

OK to make along story short my motor had to come out. when the ppt twin disk clutch got installed the friend i had did it said when he bolted the clutch back down the pp didnt want to grab. well he tossed it back into the car and of course the thing slips like no other i cant boost at all. its...

Ok ive had wierd issues ive got a auto meter coolant temp gauge it says 160-180 i know thats normal. the stock gauge sits wher it should. if i go out under the hood the upper hose is hard really hard. should it be like this at this temp ?

ok guys im in need of like an 8-9inch fan im running one now and i should have a second because of temps. i have a spal and would love a second one but i cant find another 8inch one... i checked there site and they are out of stock... so this is what i found let me know what you guys think...

Ok guys heres my issue. somtimes when im going up a hill it seems the car will loose power. almost shut off but not. wideband will go blank and it will putt. if i pull over and start the car again it will run normal. one time it ran normal and 30 secs later did it again. I had a ford escort that...

Ok guys i just got my car registered the other day. i was told it needs to go for emssions. Heres my problem car is a 1999 mitsu mirage. The car has ben swaped with a 6bolt and all the goodies out of my talon. Bigger problem car should be ob2 but itsnt it was swaped with all 1g stuff so ob2 port...

Ok guys heres my problem. I now own a 99 mirage thats got my old setup swaped into it im running two 044 fuel pumps. i mounted them up today. i put a bluck head fitting in for the return line. I went to put the tank back up and she wouldnt go. the -6 ss line is geting pinched between the tank...

Ok heres the deal. Im parting out my awd talon. I have picked up a 99 mirage its all setup for a trubo motor and everything. Problem is he was using a fwd transmssion and clutch. I have a built awd trans and a twin disk clutch. Im wondering if its better just to make the awd trans fwd and use...

Ok ive got a tiwn disk installed on my awd talon. I going to swap everything over to another car. The issue im facing is that im going to swap it to a fwd car and use a fwd trans. Will the clutch fit and is there anything i need to change to make it work ?

Ok i bought this from a friend of mine. Its a 99 mirage. its got all uranthe mounts. its setup for a 4g63 :D Car came with a huge alum rad. intercooler piping wrx seats with a cage already installed. My current 91 awd shell is beat. im going to swap everything over to this and have some goodies...

Ok my stock temp gauge is not working. I have an aftermarket gauge in the free spot right by the t-stat hosuing. That gauge will say 210. If i check the aem and read it directly its at 190. The other issue that the temp keeps going up. I have a 160 t-stat two spal fans one pushing and one...

Ok ive about had it with my stock fuel tank. Im looking into geting a fuel cell. Is a fuel cell ok for the street? would a 10gal be ok? What would be the best place to mount it ? my car is kept outside so i was thinking of inside the the trunk area instead of outside. I was also wondering wheres...

Ok i search before i posted here the story. I am running an aem ems. I had my stock ignitor go bad last night i barrowed one for the time being. I was wondering do i really need this anymore? is there away to remove it? and what do i need to have so i can remove it ? thanks for the help guys!

Ok Im going to be running two pumps. My battery is in the trunk. I have the relay and understand how to wire it. My frist question is can i wire both pumps to the one relay? or do i need one per pump? Second question if i run 16 gauge wire from the relay to the pumps will that be ok? Im going to...

Ive got a Sbr 13gt turbo. im wondering if theres a t3 hosuing i could use instead of the dsm one to get more power out of it. would anyone happen to know? and if so what housings will fit ?

Ok Ive had three 255 wallbros and they keep dieing so i refuse to buy another one. my buddy is parting out his car and had the same problem with the walbros. He picked up two Bosch pumps. Im not 100% sure what model they are. I thought it was only good for like 350 hp. maybe im wrong. But would...

Ok i got a aem ems yesterday yay! well ive ben looking everywhere for a diagram to show me what wires go for the 5bar map sensor and the air temp sensor and ive had no luck. i was hoping someone could point me in the right direction thanks

I recentlypicked up a 1994 dodge colt. its a 1.5l 2 door base model. when i mean base i mean base. no power steering no ac manual locks and windows. I think the cars weight is somewhere near 1400lbs. Im also going to remove the 50lbs front and rear bumper supports. im wondering if you guys think...

ok I was going up the road all fine and dandy. all the sudden i went to give it gas it boged saw 10.0 on a/f so i let off figured i need to take away fuel with the new setup. I look over at the rpm gauge its at 0 i got it up the road maybe a half mile pulled over. shut it off. started it again...

Ok im looking to build a head. I have already hks 272 cams im looking to rev to 9k if i want to. I wondering if 1mm over sized vals will be worth it or not. Im also wondering whos a big place to have a head done and what i should get for parts as far as brands go. im also going with a 30r dual...

Ok i have a 57 trim pte turbo. I was running it with a 2g ported exhaust manifold with a 38mm external tail wastegate on it. The flange for the wastegate broke. Im not going to take it off and have it fixed i want a new one. Im not looking to spend a crap load of cash. I saw the fp race...

Ok i pulled my car out a month ago and found a crack in the intercooler. I had it fixed and got the car back into one piece again. I checked it for boost leaks and all was good. I fired it up and noticed i had alittle idel surge. i tightened the biss screw and it idels goo at 800 where it...

Ok i took the talon out for the frist time seince i put her away for the winter. I knew when i put her away the timing was off. Well i took her out and was going to set the timing but now i have idel surge for some reason. checked for boost leaks nothing. I changed the throttle body and isc and...

Ok my mods are in my peofile. the only one that may not be is the twin disk clutch. Ok right now im running a pte 57 trim with a 2g manifold with a 38mm wastegate flange on it. took the car out for the frist timw in over 6 months and it ran pretty good. Looked under the hood and there are cracks...

Ok Ive ben having some issues with knock. Heres my ENTIRE SETUP'pte 780saem widebandfprwalbro 255 hp pumpmaf propte 57 trimtail 38mm gatebushur race front monttial bovfull apexi exhaust2.5 inch 02 hosuingtwin disk clutchrebuilt head.20...

Ok ive ben thinking of a new project. Im thinking of a glant vr4. It would have a full built 4gcs. For the people that dont know what it is its a 2.4l block I was thinking of wesico and somthing a setup from eagle rods with a metal headgasket with arp everything. for the head i was thinking 272s...

Ok i know my exhaust manifold gasket is leaking. ive ben drving the car easy. I noticed at low rpms somtimes going to 3-4k not at wot. The car shakes and shutters. it almost wants to stall. would the exhaust manifold leak cause this?

i have a chance to get free block its out of 95 Hyundai with a 1.8l dohc. I was wondering if its the same as our block with just a bigger bore. i was also wondering about the head if there were differences or not. I was also wondering if some could tell me if it was a 6bolt or 7bolt thanks...

I've got weisco 8.5.1 pistons with eagle rods. I got my car running again a few days ago. seemed to be running really well for only 15psi when i was running 22ish before. I got my a/fs in check then i noticed i was seeing knock. So i checked my maf pro and for some reason it was running -10...

Ok i did search first. I could not find my answer Im having issues with my passanger side axle poping out and leaking most of my fuild out. Well it poped out again last night. I work at an autoparts store and i can get another remand for 50 or a complete new one for 65.00 since i am not thrilled...

Ok i ended up changing my intake manfiold a month or so back and had issues every since. After i did that i found bad wires in my engine harness. I got another harness and just got it into the car the other day. i started the car up and ran for a min or two and stalled. Went to start it no good...

Ok to make a long story short i had to swap my engine harness. the cam angle sensor plug was the only thing missing on the harness i got. I went to use my old one and the dam thing broke into a million pieces :( im wondering if theres a place to buy just the plug. there are no dsms in the...

Ok i had a few wires go bad in a harness. my buddy told me to drop the blower motor,glove box. and unbolt a few bolts and i could remove the black box right behind the glove box and remove the harness without taking the entire dash out. has anyone done this? I removed the two bolts up inside the...

ive ben having issues with my car running correctly latly since i put my stock throttle body back on my car. i took the tps off the intake manifold and turned it with my hand. I checked the wideband when i did this. my wideband went lean leaner then 18.0 and then the car dies. is this normal or...

Ok i had a custom intake manifold and a 75mm throttle body on my car. im going with a smaller turbo so i figured id put the stock intake manifold on so it would spool up quick again. i changed that over. started the car and cel is on the car idels normal for a min and goes super lean. ive tryed...

Ok ive got this non turbo throttle body im going to use its a non turbo. I was told that i should put new o rings inside because the seals wont handle boost should i put new o rings inside both ends or just the one? i can get some from work but any idea where else i could look for some o rings...

Ok im not sure what year its from. I know its form a non turbo car and thats perfectly fine. my intercooling pipe comes stright out like that so it will work. Im going to be puting on a jdm intake manifold and hopefully this throttle body. I currently have a custom intake manifold and 75mm...

Ok to make a long story short I noticed my ecu fust wasnt intacted. I put it out and took the pastic cover off and it looked like the link didnt wasnt damaged that the end on the metal tab broke. So i put in a new fuse and that one poped. Well i did some searching and i noticed right at the...