Lazy and spoon fed yes. Its 2019 information travels fast and people want their data now. I myself have done this and its just quicker. Search something like speed density WOT tuning and you'll find dead threads talking about using Linktools or you go to find a picture of a sensor and you find...

The mounts will fit I have my 2 done, the stoppers I'm pretty sure don't fit. I got my poly mounts on ebay for about $40 for both. Slight vibration, check the pic you can kinda see the tranny insert.Tranny Prothane insert 13-501 Top drivers side prothane insert 13-503

Maf or speed density? Maf I would see 90's cruising and 115-120 after a pull. Gm IAT before tb with SD 125

Interesting, mine did wonders on a 14b and v1 68hta. Copper spray did nothing, just burns off.

Also resets pulled timing right?

CW is overrated, i have a 95 auto gsx just put 100k miles on it, only thing i recommend is kiggly's HLA with 7 bolts.

When i did my civics rear rockers (rust) this is the steps i did and it turned out amazing and blended very nice.320 sand Mineral spirits. Paint thinner Paint Dry Mineral spirits Clear 1000 grit Meguirs ultimate compound

1). Any boost, vac, or exhaust leaks? No boost leaks, shouldnt have exhaust leaks. 2). Verified mechanical timing? Yes 3). Verified base timing? Yes 4). Ignition system Stock Coil: yes Wire brand and Age: ngk wires 1 year old Spark Plug brand, type and Gap: ngk bpr6es .028 gap5). Motor health...

I'm at work so I can't read the log. What is the knock threshold set at? If your seeing knock at little to no boost raise the rpm threshold. I had the same problem and it killed performance, but it's more then likely phantom knock.

I'll pitch in, got this from ebay for $55 mine is recirculated. The pipe is real stainless but the flanges are cheap metal. Easy way to tell is check with a magnet. True stainless wont attract. The flanges wernt perfectly flat it might have worked but i dont want any exhaust leaks since my...

Always had fuelab fpr's and they usually bleed off to zero after an hour. Yeah i seen it at zero and later it reads 43 psi. Its happened a few times i would like to get it recorded to show everyone. My guage does have a crack in the glass if that matters. I just wonder if it caused my battery to...

Fuel pump isnt rewired. To answer that, how does my car loss fuel pressure and randomly gain it back without me starting the car. Im just going off what the fpr gauge says when i walk by it, i know they normally bleed off to zero after sitting. Battery is great just got it over the summer and im...

I never had this kind of problem so I am sorta lost, my car has basic boltons, fuel pump is stock, recently got my 95 eprom ecu done at ecmlink, caps included. The problem is I go down to my garage where its stored and always have the hood open. I always check out my fuel pressure regulator...

Fitting it was horrible i had to use a heat gun because it was warpped. Wish i would have taken pictures of that but i like it and i dont care what people think.Edit. I also wanna add that i had to chop off about 1 1/2 inches because it was to long. The one end was almost touching my tire.If...

Do you have any pictures of the reinforced knuckles?

I got 225/50 17 on 3g Eclipse gts rims on stock suspension. Really nice ride, bumps arnt that bad.

foxracing4500 updated Copper Durango Pearl.View updates to this DSM profile...

Yeah it came stock like that. I think its a 95 ONLY year color. I bought my car in pieces thats why I have the 2gb front bumper.

Nah copper durango pearl is where its at ;-)

foxracing4500 updated Just restoring a car I loveView updates to this DSM profile...

Yeah my problem is only at high speeds. Not that I should be driving that fast but once I take it to drags Its better to know how its going to act then not knowing. 75-95mph. I'll check the U-joints this weekend too.

foxracing4500 updated Just restoring a car I loveView updates to this DSM profile...

foxracing4500 updated Just restoring a car I loveView updates to this DSM profile...

In for answer. I got a bad shake but at 90mph. Im changing rims and tires this weekend though.

Copper durango pearl

Im from lewistown, close to state college.

Does shifting gears make you feel more like a man? I rub it in peoples face when they get beat by my automatic dsm.

foxracing4500 updated Just restoring a car I loveView updates to this DSM profile...

foxracing4500 submitted a new DSM Profile :Just restoring a car I loveRead more about this vehicle here...

I see ALOT of threads about Strut Tower rust BUT I cannot find anything on prevention. A little about myself, I am Maintenance at a big factory and preventive Maintenance is a big issue and saves the company $1000's every minute. So to save myself the headache in the future what would be the...

Hi everyone. Came back to the DSM crowd, I picked up a unicorn of a DSM last night. Its a 96 Eclipse GSX, no rust, no DENTS, 95k miles and completely stock. All for $1300. The history, a women was txting and driving and rear ended a truck, the trailer hitch did most of the damage. Someone...

im not to sure about buying piping now because at work we get these nice 1ft 3inch id "cores" off saran wrap rolls. The cores are made of aluminum. I could probably take 3 and weld something up for the the UICP at least, but i'll figure this out I got all winter. :)also that's a shame about...

nice alot of good info, I think I saw punishment racings kit listed under another name on ebay, im sure I could find the piping. As for VRSF, I liked their kit when I had my 2g rated at 1150 CFM but the 1g at 650cfm for the same price? no thanks!

Alright I'll look into it, still curious though if anyone has done this and any fitment issues

Where did you order your piping? Extremepsi?

Just wondering if anyone has ever done this combo, if you have pics would be great! Only reason I ask is I could buy the vrsf for now and have fun with my 16g but eventually I am going with a Holset HX40. Not only that but ets wants $400 for piping alone.

So even though its the same sensors and same VE tables, I'll still have to redo it because it will read air differently? I just don't get it because with ecuflash me and another forum member used the same ve tables for our 3 bar GM map sensor and everything (AFR) were right on.I just figured I...

So hear it goes, I been a ghost for a while until I recently bought my 91 Eagle talon. First thing I wanted was Ecmlink V3, I bought a speed density package off of Vassil (bulfabs 800hp 1g). Just theoretically speaking on speed density if I install the sensors in the same exact spot would I have...

awd better launches, no tire spin, little better in snow/rainy conditions.cons, weight more parts to break.

is that a map sensor? doesnt look like a mdp sensor.

I am done with all this bullshit parasitic drains. My DSM isnt a daily driver but mine was dead this morning, its my fault though because I dont have a Kill Switch. Once I wire that in i am flicking it every time my car off. as for stored LTFT, F-it I already get 18 mpg thanks to its heavy ass.

+1. I forgot about coil packs and sensors. But also I am not trying to just make this dsm related, I think if I did I would just stockpile it for when something bad happens to my car lol.but thanks for the idea, I remember them having a few VW 1.8t and those coil packs they have are fricken...

So I have this habbit where I will visit the junkyard maybe once a week or every other week due to needing some random part or getting a crazy idea. So I got this idea from a from a friend who said taking off random/rare parts and selling them on ebay. I know this could be a painful long way of...

venting to atmosphere isnt that great, do you know how many ass clowns speed up beside me because they heard my bov when I had a MAF translator? I think as you progress with your dsm you are going to find the GM Maf useless as most of us have. I had the translator with a 16g and stock injectors...

are you serious? 150 for this bumper?if they sell for that much I know of one sitting at a junkyard that is clean and silver. AJ if your reading this I call dibs lol.

if you have a junkyard close by go there, I got a 3" gm maf for $10 off a 2000+ chevy malibu and for the hell of it I pulled a 3.5" off an avalanche.

to the right, what is that?

something aint right, I run 23 psi on my 99 with all season tires and I still managed to beat my friends Turbo civic (350ish horsepower). But I do have Ceddy big maps and a ton of supporting mods.EDIT: Ex hatches are very lightweight btw, I think 2200lbs? vs ours at 3200lbs?

so its still true PTE makes crap turbo's? I should have clenched on to my HX35 :-/