This is the Build Thread for 4g63 swapped Miata. Reply below.

Hey guys long time no posting anything! So long story super short I bought a 1g gsx last week no running no driving today I pulled the trans and case and this thing has a 2g trans "MUZT" supposed to be a 97-99 trans. The part that's weird is the tranfer case output shaft and as well the tranfer...

Hi! been a while So a got a 90 1g gsx last year it was running fine its just need a transmission car pretty much stock other than minor mods. After the transmission swap car was running as usual afr was good, did a pull to feel out the trans all good until I came to a stop car was running weird...

eclipsyco submitted a new DSM Profile :Overseas GSXRead more about this vehicle here...

Hi guys been a while So I recently got a 90 1g gsx in pretty good shape for a 30 year old car! Only issue is the grinding when shifting to 2nd gear or to 1st if I'm not at complete stop. If I shift slowly I get no grind at all rest of the gears work fine. I'm assuming probably the syncros are...

Hi guys! Maybe I'm missing something here... Does anyone know whats up with them lately? The most recenr activity from them (Facebook and here) is from Dec 2018. I placed an order like 10 days ago and got no update at all is not even showing in their webpage under orders in the dashboard tabs. I...

Hello! This might be a long shot... I downloaded LinkTools a while back from Calan's post here https://www.dsmtuners.com/threads/ecmlink-linktools.411083/ But now a few weeks ago I've been having this issue where it is no allowing me to import a Log anymore it just throws error 9 and says...

What's up guys it's been a while! So as the title suggest could to much methanol (actually 60-40 mix meth water) hurt performance? And causing spark blow out as well! So to give a background mod list on profile are up to date if you wish to know more about my set up but is a pretty common hx35...

What's up guys been a while since last post. I'm looking for a BOV! Searching around the forums found a few but most of them are really old threats (+3 years old) and as we all know there are new products out every year! Anyway my cheap fake SSQV BOV couldn't hold 20 psi after 4 years of using...

So as the titles says! I've searched and found some other guy in this forum with he had a similar problems BUT with an ebay copy of a Megan Racing t3 manifold in my case I'm using the dsm BEP housing with FP race manifold the compressor housing clears just fine the water pipe but hits the block...

Hi guys been a while since I posted something, I rarely need help but this problem I've been trying to figure it for a about 2 months now maybe more... Anyway I'll try to keep it brief! So as title states I have high airflowperrev at idle (.33 - .35). Car most of the times idles great but if I...

So guys searching around I've found a few threats about this but not one with a direct answer so a few months back I installed a Fuelab AFPR and a walbro 400 pump along with 6an lines (feed and return) and aftermarked fuel rail. The problem I'm having is that fuel pressure drops fast after I...

Hi guys! I'm about to upgrade my clutch! but I need some help here... First of all I'm on pretty low HP/TQ levels here, 16G with supporting mods at 17-18psi BUT a HX35 is on the way later this year or next year maybe depends on the $$$. So I'm pretty sure that I want this...

Hey guys! Need help here! So while cold my A/F ratios are all over the place! and I need to fix this, It happens mostly if I drive the car cold it will even die because it goes way to lean I have to be on the throttle to keep it alive, I think my VE tables are off. All about tuning is while the...

eclipsyco submitted a new Showcase Item:GST out of USARead more about this showcase item here...

Hey guys and girls! Got weird issue when the car is cold and started happen right after a switched to SD and I'm pretty sure is tune related I have tried my best tuning with SD I've done lots of reading but i consider myself a newb when it comes to SD (there a lot of things I just don't know)...

Hey guys! So I did my research but I want some direct help here I feel like a noob now LOL (maybe I am) Thing is I can't boost past 8PSI which is the stock wastegate spring pressure! I have a Vibrand boost controller... this one...So is not a ball/spring type is most like a bleeder type...

Hey guys need your help here! So long story short… the car been sitting for like 7 months during those months I changed multiple things like new turbo and exhaust manifold, 3" ss turbo-back exhaust, clutch master and ss line, aluminum radiator etc (profile is up to date) After that the car was...

Hey guys what's up so here's the deal I have a leak (pretty big) in my clutch but don't know where! Is almost like it evaporates. Inside the firewall and under the carpet is dry the master cylinder piston is slightly wet but not enough to leak now on the outside the slave is dry all lines are...

What's up guys! So as the tittle say I need the rivet or plastic clips that hold the sideskirts in place where can I find some online, only thread related is over 10 years old and was not very helpful... Thanks in advanceI searched ebay and a few other sites I found some but I just want...

Hey guys!? What's up? Quick question here I use a Mac for my data logging with dsmlink but I also have an MTX-L wideband which the software appears to be only for windows PC. The site is currently down (http://www.innovatemotorsports.com/) so I can get support from them right now! Do any of you...

Hi guys it's been a while since I was around here and this is the reason why.Yes I manage to flip my car somehow, actually it was not my fault. They pushed my out the road and I hit a lug and flipped. So now I'm on my way to restore this car for a second time in less than 2 years of...

Ok guys need advice here! Some backgroud story first... The previous owner was involved in a bad car accident like 3 years ago! The passenger side fender, door and headlight where replaced as well as the front bumper, hood and the mount that is on the tranny. The car was totalled for the US...

Hey guys! Quick question... Is the cruise control pedal switch and the safety clutch switch the same kind of switch. I have the clutch switch disabled and my cruise control pedal switch totally missing and I can't find it anywhere online! Can I just by a clutch switch and use it...

So there's been more than 20 years since the very first dsm came out from the factory. Have you ever wondered 20 years from now what's going to be. Or maybe the question is what will the future for these cars be, the market and the fans? I know is hard to say but what do you think?

Hi guys! I've been having this issue for like a week now car runs great but when under boost usually 10+ psi it smells like fuel as soon as I let off the throttle smell goes away. Since I didn't found any related thread here I searched the web and on a few different forums they say it might be...

Ok so reading around the forum i collected this info:The whole purpose of adjusting the TPS on a 2G is to make sure that the Idle Position Switch inside the TPS is telling the ECU when the throttle is closed. 2G's critical adjustment is the Idle Position Switch that's part of the TPS.The...

What's up guys! I wanted to discuss the differences the good and the bad between the fuel and spark/ignition rev limiter it seems there's not much info about this in the forum. Do you guys use any? Can both be used at the same time? Which one is better and why?

Quick question guys is this the alternator fuse? Will this work? And the one next to it the 60 amp one is the same kind of fuse too? I need to buy a few? They are inexistant down here I would like to have a few just in case ;)

Hey guys just as the title says have any of you ever heard of headrest for the rear seats? Why am I asking? Because on saturday a went to the yearly inspection smog and visual I passed the smog and the engine visual inspection (GM maf C.O.P with ARC-2 and some other engine mods) BUT I didn´t...

Hello guys! I´m about to do timing belt and BS elimination this tread is just for you guys to check if I have everything I need and to post some questions I might have during the process. Since I live outside the US and it takes almost 2 weeks to get parts down here so I want to be 100% sure I...

So who here owns this black mitsubishi LoL ROFL My Girlfriend's Boyfriend - YouTube

I´ll make this short I have and eclipse gst, build in march 95! How can tell what kind of engine I have early 95 or later 95-96 engine i know the differences between the the engines but my real question is how can I tell what is it without having to tear apart the whole thing. Reason: I´m...

Car was running fine and I have already done this with my old biss screw.So I got a new biss screw with o-ring and cap from mitsubishi, took out the old biss and replaced it. When I tried to adjust it with link nothing happens for some reason my ISC motor which is a few months old is maxed out...

Hey guys I'm removing my charcoal canister just now do I absolutely have to block the EGR? I'm just tring do relocate my battery lower. Thanks

So finally i can get rid of this horrible altezzas I found a nice set of stock taillight for cheap! SO guys need your help here with some really noob question but it's because I don't remember any more :confused: can you refresh my memory about the taillight sequence?... So what i mean by...

Hi guys so while doing a cable management under the driver side I found something unusual there is a wire that goes from the starter switch (MB398020) the black and yellow cable is bridged with this plug And is connected to the red and black from the plug if a take out that cable car will get...

Yeah so what is this? Is almost empty and the fluid in there looks nasty! I can't really thing of anything just maybe a.c. related or I don't know really.

Hi guys i'm having this little weird problem with my cluster so the thing is my cluster had 2 burned bulbs so today i decided to change them i remove the cluster replace the 2 bulbs turn the ignition on and the problem started for some reason now the brake warning light won't shut off the only...

Hi guys need some help finding something.... making long story short my car throws me the 1500 code (General FR Terminal Circuit Malfunction) so i start troubleshooting and pretty quick i found out that both cables that go to the ecu if i'm not mistaken pin 33 and 41 the green and the white one...

My question is the above, I can't get an answer from search sorry Is because i bought a FMIC w/piping but it didn't come with the TB elbow and I'm using a 3" GM MAF. So i but everything together but the 2g TB elbow seems to short for a GMmaf (to close to the TB), I'm using dsmlink with the gm...

Hey guys! The stock rubber intake on a a 2g it has 4 recirculation holes/nipples... 1 for the BOV 2 for the CV 3 for the stock boost controller solenoid 4 for ???? What the fourth is for? Is a thick house going all the way from the intake to under the battery! i think is the EGR but not...

heys guys!! So straight to the point, I got 3" gm maf for free and since a have link i thought giving it a try, i bought the GM MAF cable from their site as well so now i need some advise. On ecmtuning i read this... "NOTE 1: We absolutely must make mention of the fact that GM MAF outputs WILL...

Hi guys I'm going to smog test on Friday and I need to make the car run leaner just to pass emissions I probably need a catalytic converter but I don't want to buy it since I'm doing a 2.5 exhaust swap without cat converter just a straight pipe. My co levels are a little higher than they should...

I dont know if i should post this here, i tried in the vfaq but it wouldn't let me... Maybe some of you guys already know this, while i was browsing around on the net i found this intresting write up and some of you guys might want to read this up...I'm taking this from another forum, if...

Hi guys! I need some help here my car still not passing emissions i was told that i might need a new catalytic converter because i have high CO readings, but wouldn't a bad catalytic converter throw CEL? I scanned the car for codes with 2 different scanners no codes at all same with DSMlink no...

ok guys here i got another one for you.... So the fan in my car don't come on when the needle is at halfway up they come one until the needle It's like waaaaayy up almost on the "H".WTF DSMlink shows me the temps are around 195 to 200 tho and thats a normal temp for these cars right? Or am I...

Yes i know that there are a lot of threats about the link but still didn't find my answer probably this is going to be a way to easy question for many of you guys... The thing is that a got my link today just a couple hours ago and it came with instruction about the clutch-cut wiring. So why do...

So while i wait for my link coming this week i decided to do a cable management under the dash (driver side) it's a mess and i found some cables unplugged... So if any one knows thank you in advance and sorry for such a noob question but this is the only way to learn.. i want to know what are...

Making long story short there is this guy at the emission test that told me to rev at 3000 rpm and hold it, after a few minutes the car started overheating and my rpm idled at 1200 and he told me thats not normal.. is that true? My normal idle at normal temp is 800 to 900rpm... So my...