I only have 40k orginal miles on the car and this is happening. Its at random as well. I was thinking it was the TCU, can anyone share some thoughts on this...

Just had a transmission service done yesterday.

So the other day I had my timing belt/spark plugs/wires/oil change all done. I get car back and couple days down road, on the way home which is 30 minute drive. It started to hesitate right when I almost get to my house. It does it only when I am about 5 minutes from home. So after 25 minutes of...

FIXED was the 100a alternator fuse.

Ok I am still having the issue with my power windows not rolling up, my ac doesn't blow are at all the compressor comes on though, my interior lights don't work, the beeping when you open doors don't work. Everything else works. Now a little short story to what happened. I had some kind of short...

Thanks Man

Well the headunit doesn't work on the radio so hard to tell if it works or not. But where are the fuses for the window/lights in car/beeping/air ? Cause I don't have the top for the fuses under the steering wheel so hard to know which is which.

I had something bust and cause smoke to come from under my radio. This happened when I was at 4k rpm's no idea what happened. I check ecu and everything is fine on it. Now my problem is my car windows won't go up and light when you open door doesn't come on. Also the beeping noise it usually...

Where is the wire for turn signal? I can hear it blinking but it doesnt show in the dash. i am going to get a better look at wires tommow and check them. But when I turn signal on it makes my car idle weird idk why or even when I click for my brights to come on it does it to. So something in the...

Well I found out that one of my plugs on my ecu looks like it was done by someone blind. But I am going to fix that issue and then go to the fusses. Would a fuse make my car idle weird just by turning a turn signal on?

So I was driving my car and went to 4k rpm's heard a noise by the radio. An then seen smoke. So I pulled over to check it out and by time I pulled off the sides could only smell couldnt see nothing wrong. So I go to start car it starts fine and drives fine. But now my windows dont work. My turn...

Yea soon as you hit 3k rpms. The guague stays at 0 wont go above.

Hey guys my bros gst is having a problem. When spitting still revving the car up n when it hits 3k its spitting. An when u drive it and soon as u hit 3k it acts sluggish and doesn't wanna go. An u see black smoke coming out exhaust like its running rich. What was cause this. We just threw on a...

Ah I skipped over that last part.

Guess no responce, I am interested

Or some package deals? like wideband/true boost controller? or wideband/true boost and link?

heck yea I've been waiting for this! ordering now!Why does it say 200??

Maybe But I don't think its slipping. I checked it already but just look on other peoples insights.

Couple questions I would like to ask. 1st: When in 1st gear taking off slow my right/left tires make a noise and tires feel like not getting grip. But if I take off with more speed it doesn't feel like its not gripping, only does it when I take off real slow. Could be my wheel bearing? But what...

Doing black friday sale? I will have money by then. But if you say you will put item on sale, how much for link v3 and wideband together? Give like a package deal =]

Bump anyone still on here thats in ft.myers??? Tryna meet some other dsm'ers

he has a t3/t4 so guessing u can only use 16g n cyclone intake?

I got a guy I might be buying a car from claim he has the 6 bolt cyclone swap in his car. Is their anyway to tell if this is correct? Any specific looks or numbers I can verify that it is true?

Ok I got a question I am going to buy this talon tsi for 3100 I was wanting to know if yall think its worth 3100? Also I got a 98 gst I am planning on taking my performance parts off and either selling it cheap or just parting it and scrapping it. Any know how tell if the cyclone motor is legit...

Ok I got a question I am going to buy this talon tsi for 3100 I was wanting to know if yall think its worth 3100? Also I got a 98 gst I am planning on taking my performance parts off and either selling it cheap or just parting it and scrapping it. Question is the tsi is 6bolt motor and mine is a...

Bump has a meet come up yet? An anyone know of a good shop in fort myers area that rebuilds transmissions?

I dont have a pin, its a clear hole all the way to other side u got a email ill send a pic

Well what if the hole is clear from one side axle to other??Also I had my right side jacked up and my left side on ground and I tried to spin tire while in 1st and it would not spin

Ok so I bought this transmission and he said came with quife lsd, question is how can I test to see if it has lsd. I jacked both tires up and spun the right tire while in gear and the left went the opposite way. An when i spun the tire in neutral the other tire did not spin. But when I posted a...

Anyone know the bracket size it has to be to get it to work?? I seen couple people that have done this swap I just came across 2 perfect condition black leather seats for 150 and its kinda hard to pass up. Anyone know how hard it is to get it to work?

Yep get it done right first time i should have about 800 for parts after labor so hopefully not to much is bad. supposebly it has quife lsd in it so will see if its true

Yea its 400 to tear tranny down. bearing is only 30 but who knows what else could be bad

Guess its smart to just pay 400 to guy who builds these to fix it right the first time

Yea i the input shaft bearing is also what im thinking. how hard is it to.replace?

Yea I was thinking about doing that. i am ###### going to take it to a guy thats works on eclipse's up road from me to have him listen to it and see what he says. I am pretty sures its coming from housing I hope its not shaft that would suck. I am thinking something is loose though.

Sounds like noise is coming from the housing area, when I had my buddies looking at it they thought it was rod knock because where they were hearing it but I pushed clutch and gone. So somewhere by clutch/flywheel. I pushed the fork in while running and you can still hear noise and it goes in...

Ok so I've posted couple times about this problem with my transmission making a grinding noise internally it sounds like. Had couple buddies look at it at a meet, an their just as stomped one brought to my attenion that my clutch fork was able to be pushed in with no problem and I mean easily...

Yea I got same exact problem, Luckly I got a guy close by me that builds these trans. My trans was already rebuilt and then when installed I get that same noise. It shifts fine and I can drive car but when revving or deaccerating I will get that noise. I am thinking input shaft bearing but will...

yea it does go away when I press clutch in. But with it going bad what all could be damaged?

thanks for responce man, I sent you a pm see if you can help me.

What they tell u?

Grinding noise when in neutral when I revv up. I also get the noise when I am driving and I let go of gas at 3k or above rpms and the car will have grinding noise and as soon as I press in clutch or throw in neutral it goes away. I am thinking its input shaft but I keep reading and I keep seeing...

Grinding noise coming from tranny while in neutral, I also get noise when I am driving and I am at high rpms and I let go of gas you can hear the grinding noise. I am leading to believe its the input shaft. Read some forums of people having same problem and lot said the input shaft. Can anyone...

Well I want to know can I just flash my ecu once I get the 750 injectors to have a proper tune so I can run 20psi?An If I want to change later on down road I can use ceddy to reflash correct?

Ok yea thats what I was thinking

I got couple questions about it. I got a 98 eclipse gst and its got flashable ecu. I want to get 650-750 fic injectors added on, I got the wally 255 just havent installed yet. I was going to do ceddy to tune it. But I seen some people just flash their ecu to tune. I honestly am not going to mess...

I already adjusted it

Ok, yea I knew wheel bearing was bad. Guess thats why I hear noise when I drive. An noise when I revv up I think its something rubbing not sure where

video-2012-05-11-07-14-54.mp4 - YouTubevideo 2012 05 11 09 04 49 - YouTubevideo of me driving and one of it while its in neutral just revving it.bump anyone know what it could be??

I know the hub and axle are bad Ive already had that looked at. I am going to try and upload video