I'm trying to see if they will fit my Mirage in the rear, have FWD but they are too short. I can order the awd lower tube from Megan direct if it will work, Thanks!

Want to convert my 8an rail to 6an but I cant seem to find the fitting sold separately or what the thread pitch is so I can find one that will work.

xxNocturnalxx submitted a new DSM Profile :89 Colt GtRead more about this vehicle here...

Is there a easy way to display with a gauge straight from the flex fuel sensor? Can I simply wire the gauge to ignition hot and to the GM flex fuel sensor wire? Looking to get a ethanol readout without needing the laptop in the car. Thanks.

I'm not sure what the standard method is when it comes to welding an internally gated waste gate shut. If the arm is welded because the flapper door itself is not easily accessible then this seems to create a problem (my situation). I have 2 turbos now with loose flappers, each gate was welded...

From what I can see there are 3 main different types of J-pipes, correct me if I'm wrong. There's a passenger facing one mainly for SMICs. Then there seems to be more of a mid one that goes between the fans and ends up near the top of the waste-gate actuator? And lastly one that bends even more...

So I want to run the GSP T3 cast manifold http://www.ebay.com/itm/291253217607?_trksid=p2060778.m1438.l2649&ssPageName=STRK:MEBIDX:IT..With the FP blanket http://www.ebay.com/itm/300715581521?_trksid=p2060778.m1438.l2649&ssPageName=STRK:MEBIDX:ITI'm basically looking for a budget set-up for...

xxNocturnalxx submitted a new DSM Profile :89 Mirage 4g63 swapRead more about this vehicle here...

http://www.nwmotiv.com/forum-fest/NWMotiv.com and Pacific Raceways are proud to announce Forum Fest 2013!Back for it's 4th year, Forum Fest is bound to be the biggest and best Forum Fest ever! Last year we saw over 350 show cars, 100+ drag cars and some of the best drifters from the...

I'm thinking about going with an HX40 and was looking around for some t3 housings. I noticed some are 4 bolt and some are 6 bolt. What is the main difference? Most of the HX40s I see seem to be 6 bolt but I was looking at these and they are 4 bolt EXTREME PSI : Your #1 Source for In Stock...

Riverdale Raceway 7255 Spirit Lake Hwy, Toutle, Washington 98649[Description] 2 Dates this year ->May 18th and Aug 10th. Riverdale Raceway is trying to get imports to be more regular there. Its an 1/8 mile drag strip. Its not as strict to run at then PR or PIR. Pretty laid back...

Don't mind the crappy cell phone pics.:coy:<img src="http://www.dsmtuners.com/gallery/files/1/3/3/0/3/6/photo_22.jpg" alt="Photo 22" /><img src="http://www.dsmtuners.com/gallery/files/1/3/3/0/3/6/photo_21.jpg" alt="Photo 21" /><img...

So I just installed a set of FIC 1050cc injectors I bought off the classifieds. Only thing is the seller didn't mention one of the injectors was bad so I was wondering if anyone has sent injectors into FIC, will they clean flow test and replace only 1 or do I have to buy a whole new set. I will...

Looks like more TnTs this year:hellyeah:2013 Drag Race Schedule

Dates are May 18th and Aug 10th. Riverdale Raceway is trying to get imports to be more regular there. Its an 1/8 mile drag strip. Its not as strict to run at then PR or PIR. Pretty laid back.Roll-in at 10AM, Racing starts at NoonDrag-> $30 to run (includes the option to do car show...

Turbo Mirage 4g63 swap Pacific Raceways TNT 8/24/12 - YouTube<iframe width="560" height="315" src="http://www.youtube.com/embed/YkoPBgTfdGI" frameborder="0" allowfullscreen></iframe>Hit the more info tab.. for more info..;)

75 cars pre-registered alreadyI will be there, just posting this for anyone that might be interested.Location: Top Food and Drug 1702 Auburn Way N Auburn, WA 98002Time: 10am – 11:30am (Parking and registration) 12pm – 4pm (Show and BBQ)Cost: $10.00 for ImportMeet.com...

Wicked Wednesday / HS #7 / PRDC #9 August 22, 2012 at 5:00 PMWicked Wednesday’s are open to all vehicles (Street Legal cars, Imports, Motorcycles, Bracket Racers, Jr. Dragsters, etc…). All vehicles must pass an NHRA Technical Inspection to participate. This event is open to individuals...

Decided to do the timing belt today as it was walking around and loosing material on both sides. I believe this was caused by improper tension and a seizing idler pulley. Anyways when I put the engine to TDC the oil pump sprocket was off 2-3 teeth in the counter clockwise direction. Is there any...

Just thought I'd post this up incase anyones interested, I'll be making the trip down, anyones welcome to roll with me.Import Drag Race - 7/28 Event Start: Saturday, July 28, 2012 - 9:00am Import Drag Racing Schedule: 9:00 - Gates Open 10:00 - Racing begins 5:00 - Race...

Anyone going? I'm thinking about heading out to this one.

Anyone running a Synapse wastegate? How do you have the ports hooked up and how much boost are you running? Anyone have any luck getting a MBC to work on it?Currently having trouble getting my boost dialed in. I have read through the manual and pretty much have it memorized. I also have been...

Tranny fluid leaking from shift lever:|, I am using the KM210 tranny which I believe is the same as the early 1g F5M33 tranny except gearing. I was wondering if the rebuild kit includes the part that seals the shift lever or does someone have a part number for it? I'm not even sure how it seals...

Looking for the thread pitch and size of the A/C temp switch that goes in the thermostat housing, I've heard it is the same as the oil filter housing plugs. Basically I just have the sensor in there and it just looks ugly and out of place because it's right on the top.Or if anybody has one...

If anyone happens to have one I will come to you to get it, name your price. thanks!

I had a 90 turbo throttle body and am swapping it out for a 90 non turbo throttle body. Do they use the same gasket for the intake manifold mounting point?EXTREME PSI : Your #1 Source for In Stock Performance Parts?

We would have ran more boost but was wasting too much time trying to get the Synapse dialed in. Had a boost leak that was progressing through out the session so something is starting to slowly let loose, haven't figured out where its at yet, will get a blt back on it soon. Over all I'm happy...

Location: Pacific Raceways 6/23/12 9am-5pm.Anyone going? We have a group meeting up and the Supermall Starbucks at around 7:30am if anyone is interested in rolling in with us:hellyeah:You must register your car on the link provided and bring a printout of your confirmation to enter your...

I recently had my super 20g in the shop to get the elbow rewelded to driver side for shorter route piping, well now that the elbow is turned around 180 there is less room for my coolant return line which is -an and is now about 1/4-1/2" away from the exhaust housing, It is a 90 fitting that...

Like the title states, the vacuum barb on my RZ is broken, I've tried the Greddy knock off ones with no luck suprisingly. Anyone know where I can get a replacement?

Hey all, been lurking around for a while and found some things in the classifieds I want but can't conact anyone yet so I guess I'll be around the newbie forums for a while. I'm Origionally from 4G61T.org, same user name over there..About me: I've been into DSM's for about 10 years now. At...