I have a 95 gsx with a 6 bolt swap. I just bought this car and the wideband seemed to be working. I took it to the carwash and washed the engine and now the wideband reads "--" I checked the connector going to the sensor and it seems fine. Did I mess something up washing it? It doesn't yet have...
So I have read a lot of posts on catch can set ups and have also read through the thread by Calan about how our pcv system works but I still can figure it out. I'm getting a good deal on this mishimoto catch can and just want to know how to correctly hook it up being that it's sealed and only...
Ok so I just bought a COP set up from a guy for an awesome deal, had no intention on this set up but couldn't pass it up. After I purchased it I found on ecmtuning website about swapping out two wires at the ecu to use a cop set up. My car is a 95 with a 95 ecu with link. I have a 95 CAS and it...
So i can't decide/figure out what fuel injector would be best for my build. I have done the searching and learned that our ecu is set up for high z but we have a resistor pack to run low z injectors. I'm correct on that right? All the threads i find seem to be people running e85, im going to be...
So before I even ask my question im just going to say I have used the search bar and done a lot of reading, just still a little confused on SD. I'm currently running stock 2g MAF with link V3. I'm going to be installing an FP black I just ordered and would like to just get rid of the MAF and I...
So I'm looking at upgrading to an FP black for my soon build. I will have all supporting mods just one question, I'm currently running a 16g oil fed from OFH I was reading on FP site that you should have some oversized feed line and should go from the head, is this true? What all would I need to...
I have link V3 and recently put the S90 throttle body on so it lost all the vacuum ports. So I removed all the emissions sensors off the firewall and cut the plugs off and went through the DTC in link and shut my CEL off but it comes right back on for the same reason next time I start the car...
So im going to be completely rebuilding my 7 bolt and would like to get a solid list going of what i will need and if there is any thing i am looking past such as should anything oil ports be ported out or any tricks like that. Im going forged internals and going to be shooting for around...
So I'm completely lost on what my true coolant temps are, I have link V3 and when the car is fully warm and even after making 3 hard pulls link is reading my coolant temps at 105 and no higher, now my stock temp gauge reads really high almost all the way on the "H" so I have no idea what my temp...
So my buddy just bought a 95 eclipse gsx with a 6 bolt swap. It has a 20g turbo with all supporting mods and supposedly has link v2 in it. It starts up fine and runs great for about the first 5 minutes and than starts to stumble horribly and sounds like its gonna die. Than if you shut it off and...
This is my first log on link and would really appreciate it if you guys could look it over and see if everything is looking good, theres a couple pulls through the gears and some normal cruising. One thing thats weird is when i get off the throttle it almost acts as the cars dies and the log...
I just got ecmlink installed and running, at the same time I removed all the emissions stuff, put on a s90 throttle body, the car starts up great, it idles really high at about 1700 rpm. When I cruise around and just feather the throttle the car cuts out really bad, under boost it runs great and...
I'm putting my new s90 throttle body on and am just confused about the tps adjustment. I read Steve's post about it but I'm doing Jt with it off the car, is this possible? Also do I probe the actual tps sensor that's bolted on the throttle body or its connector. Thank you for any help
So im looking at ordering the S90 70mm throttle body, i have stock intake manifold, im just curious is this a direct bolt on? Looking at the pictures it looks a lot different, my stock throttle body is flat on both sides. Will this work on my 95 talon turbo without modification?EXTREME PSI ...
I have a 95 talon TSI, it has a 16g turbo and some bolt ons. I have been having some trouble with getting it running right. I have no logging experience or tuning experience and was just wondering is link just as good at diagnosing problems as it is as tuning? Also can someone with no experience...
So I have a 95 eclipse gst when I bought the car the CEL was on due to the ECT so I went and bought a new one, when I went to put it in I noticed the previous owner had cut the wires and put a new harness on. So I installed the new ECT and a week later CEL came back on, so I swapped the wires...
Im looking at getting my Talon painted and was just wondering if anyone around here has had good paint done, im not looking at spending more than a grand but dont want a paint job thats gonna peel in 6 months.
Alright so the last few nights it has gotten down below freezing and my car has trouble starting and runs rich until it warms up, i always hear about people parking their turbo cars for the winter, so is this all normal for these cars than?
So i cant seem to find a harness bar for a 2g other than ebay, this one looks pretty good though, anybody ever used it or know of another?Eclipse 95 99 Seatbelt Seat Belt Harness Bar Black | eBay
I have a 95 Eagle Talon i just bought. When i bought it the CEL was on due to having no cats and a bad coolant temp sensor, i have since than replaced the CTS and used the vibrant performance o2 bypass, and that has shut the CEL off. It has a small 16g turbo, a vented SARD BOV (I know, i know) a...
I have a 95 Eagle Talon i just bought and it has been running super rich, i just went out to start it right now and now it wont start. it just sits there and tries to turn over than i can smell fuel really strong like its flooded. Is my fuel pump bad or something? Someone please help im at a...
So i have the Greddy tvvc manual boost controller. The guy i bought it from didn't have it hooked up and i think i found out why. I hooked up the lines right and took it for a drive only to find out that no matter which i way i turn the controller all the way to one direction it doesn't control...
So I'm gonna be running autolite iridium plugs with MSD 8.5 wires. The guy at auto zone told me to gap at .035, the book tells me between .026 and .032 and everything I have read on here says to gap at .028. So with my setup what gap should I be running?
EXTREME PSI : Your #1 Source for In Stock Performance PartsHas anyone used this? Cause I have no cat and my CEL is on and if this actually works I would love to get the orange light out of my face! And would you use it on the 02 sensor housing on the turbo or the one further down the exhaust?
I just bought a 95 talon tsi and after sitting over night it's got a decent size puddle under it, I first thought it was oil but I put my finger in it and smelled it and smells nothing like oil and its also thicker. unique smell, it's coming from the front of the car kinda more on the passanger...
So i just bought an eagle talon tsi and at idle and normal cruising it seems to be fine but when i get on it it sputters, backfires some and runs super rich, i can even smell the fuel. My question is what causes this, its got a tdo5h turbo but i dont know what size for sure, it has a narrow band...
So im looking at getting this car, i have done tons of research and know a lot about DSM's. just a couple quick questions, this is the 6 bolt motor right, and how does it sound and look to you guys mechanical wise, i dont really care about looks. tell me what you guys think or any tips to check...
Im gonna be using the evo III turbo and was just wondering if i have to use the evo III o2 housing, i would like to get an o2 housing with external dump because it helps boost creep, any that will bolt up to that turbo?
So im gonna be rebuilding a 98 GST, this is my first engine rebuild, i have my list of parts i need but i was just wondering what all machine work needs to be done. I know i need to hone the cylinders out but thats about it. I have also heard of having the rotating assembly balanced ( Does this...
Right now im looking at these rods EXTREME PSI : Your #1 Source for In Stock Performance Parts teamed with these pistons EXTREME PSI : Your #1 Source for In Stock Performance Parts my other choice would be these rods EXTREME PSI : Your #1 Source for In Stock Performance Parts teamed with these...
I'm going to pick up a 98 2g Eclipse GST this weekend. It is bone stock with 180 thousand miles. I have done tons of research on DSMs and spent countless hours compiling an upgrade path list. Im going to be shooting for around 400 hp and just wanted to post up my list of upgrades and get...