Im gonna be moving in the near future and Im not gonna take may car with me.So im parting it out.1990 white Eclipse GST.3 inch fwd Downpipe, (Sale Pending) Fp exhaust manifold VRS Frontmount, (SALE PENDING) K&N filter. Competition stage 2 clutch 400 miles Competition light flywheel 400...

Both aem and innovative make great products. Check with some of the site vendors they can probably get you a better price than the manufacturer. I personally run the innovative because it is what the dsmlink guys reccomend to run with their tunning software.

It is propably not a wide band 02 sensor so it will be inaccurate. Get yourself a lc-1 or take a trip to a dyno.

I would also go cat less 95 and older in st.louis don't need emissions. Unless you are worried about your carbon foot print.

Just run some meth injection or e-85.

Ive been searching locally for a back glass at a junk yard to no avail. So Im gonna bite the bullet and have a glass company come out and R&R the hatch glass.:notgood: I just want to drive this thing. In the mean time I have been working on rebuilding my holset H1C. I also polished the...

LC-1comes with instructions use them or download them from the web. You will have to hook the brown or yellow up to the gauge. Consult the instructions on which one to use. Either will work but you may have to reprogram the output if you choose the wrong one. Again read the instructions.

I am still looking for an awd where is yours located

Ok thanks and any sites you know where I can pick up a good rebuild kit?

Going to rebuild my H1C and was wondering a place to pick up good rebuild kits. Ive looked at the e-bay ones already and also found this web site. BAE Racing ComponentsI am also wondering if I install a new compressor if the turbo would need to be rebalanced as an assembly. The site list...

So I am still on the look out for a good awd chasis but in the mean time im gonna go forward with this car and get the engine set up the way I want it and forget about the cars body. I picked up a big Holset H1C Saturday, has 54mmX83mm wheel. Havnt decided if I want to go t3 manifold or bep...

Yeah put a 45 there and it should lower the other pipe and give you clearance for the bov.

You probably need a 45 degree coupler at the throttle body elbow.

Like the title says I'm looking for a 1g awd dsm preferably with a blown motor.Thanks

Got a crap ton of hail tonight and it f'd up my car pretty good. Im kind of disgusted, need a new winshield, rear window, hood, fenders, tail lights, roof, and wing. I dont know if i want to fix this chasiss or swap everthing into a new one. I may go with awd if i decide to get a new chasiss and...

The starter should spin even with no cas.

You are correct, there are 2 different 1g heads a 6 bolt and a 7 bolt variation. I had the same thing happen to me from a different head shop. Most people assume that if it has big intake ports it will fit all 1g blocks.

Thanks thats what I ended up using.

I recenlty bought a 90 eclipse that was missing the driver side door handle and lock. Luckily the previous owner got a replacement from the junk yard with a key. I installed the parts and realized I now needed 3 keys for my car. 1 for ignition 1 for driver door and 1 for passenger. I could have...

So I pulled the passenger side apart to use it to duplicate the part needed. Now I just need the part the holds the rod into place, anyone have a part number for the part in the picture below..

I was wondering if anyone could throw a picture up of the driver side door handle lock bar for a 1g dsm. It is the one that is about 6 inches long and works the lock when the key is turned. I have the appropriate size rod to fab one up just need a picture and possibly a length of the rod. Or ill...

Buy it you can always sell it for more money.:thumb:

You can fab one up out of the stock stuff. Makes a better looking shorter cable. So tiny this is a 1g but 2g woul be siminlar. :thumb:

I used to work at a local import shop in st.louis and they used this place alot.Phase II 10327 Watson Road St. Louis, MO 63127 (314) 909-0980

I would say thay are an import shop like Speed and Sound, not a dsm shop. Yeah forget the shops and order stuff online.

Not any dsm specific shops in St.louis, but there are some shops who do import stuff. Ive tried gatewaydsm and never saw any new post on there, so I stopped checking it out, but maybe I wasnt looking in the right spot. There is a St.louis section of this forum though. St Louis Area DSM Forum -...

Here is a thread I have going about the Ecm link plug. http://www.dsmtuners.com/forums/tuning-engine-management/422423-custom-ecm-link-dash-plug.html

Here is a link to the place I bought mine, they have fantastic customer service to boot.Switchcraft Panel Mount Connector (USB A to B) | Sweetwater.com:thumb:

I went with 1.5 inch T-bolts they fit good but were a pain to get started. I had to have my buddy squeeze them closed with pliers as I threaded on the nut.:thumb:

Here is a pic of what I finally came up with for my Ecm-link dash plug.:thumb:

Thanks, still have a ways to go but I'm having fun doing it.

Almost 2 months since I last updated. Cut the crap out of my finger so I couldnt do much.:notgood:Got my VR front mount fully installed and the stock 1g bov flange welded on. Disconnected my A/c due to inter-cooler fitment. Removed A/c fan due to inter-cooler fitment. Installed a PR 3 inch...

What ever you get, forget about evo 8 pumps they have a fuel pressure relief valve in them.

Could be injectors firing sponateously. Pull the ecu out and check it.

Did the head fit before you got it repaired?

Get some red bull and do it. We are all waiting impatiently. Nice work so far:hellyeah:

Anyone know what size t-bolt clamps are used for the factory radiator hoses upper and lower? My car is in storage at the moment or I would just go measure it. Thanks in advance.:thumb:

I like the innovative lc1 wide band. I just picked one up on eBay for 160 shipped.

Finally got my VR-speed inter-cooler in and on, after a small back order. While taking the front bumper off I broke 4 bolts.:ohdamn: The kit is really nice for the price. The only bad part was the A/C lines had to be bent alot, and I had to take my power steering cooler off.

I really like the Innovative LC-1. I just picked a new one up for 160 shipped from ebay.

New hard lines come with the nuts on them already all you have to do is fab them up.

Cut it off, buy some new flex lines and fab yourself up some new hard lines. All you have to do is buy a tubing bender and get the correct length. All parts you need are available at your local parts store.:thumb:

Thought I would add a couple updates. Ive been working on my buddies 08 WRX so I have been neglecting my ride.:cry:Ordered a VR speed FMIC Should be here anyday.Got the O2 sensor fixed but my Estimated AFR at idle is a little rich, so I gotta figure that out.Heres a couple pics of...

Knock is not only a dsm term but an automotive term. Google is your friend:thumb:

All you need is contained within.http://www.dsmtuners.com/forums/articles-tuning-ecu/366003-injector-fuel-pump-supported-airflow.html

If you are mechanically inclind you can build your own built engine for 1500.:thumb:

There is a vendor on here having a sale on Intercoolers until the 31st. http://www.dsmtuners.com/forums/vendor-announcements/424325-vrsf-1g-2g-dsm-fmic-sale-ends-31st-get-while-gettins-good.html

Drilling out steel requires a low speed high pressure approach. Dont forget to use alot of lube. Use a dremel to grind the broken bolt flat, use a center punch and then drill away. Use progressivly bigger bits until you get to a point where the threads start. At this point you can try to pry the...

Ive done it, pretty easy to do.Check this thread out. http://www.dsmtuners.com/forums/custom-fabrication/419171-mini-throttle-cable.html

Do you have the stock BOV, and is the BOV recirculated?