As much as it pains me to do this,financial issues force it. The car is currently running,but it snapped a balance shaft belt so it has some vibration because of this. If you buy it and do a balance shaft elimination im sure it will be fine. I dropped the oil and it looked clean,and compression...
I need a balance shaft elimination kit for 1g to get my car up and running. I know there are many sites i can order a kit from,but i dont have alot of time right now. Do y'all know of any shops or auto parts storez that may have a BSE kit in the PDX area,that way i dont have to wait for...
I am needing a 02 sensor for a innovate w/b setup. I have the innovate mtx-l wb setup,but the sensor gave out after 3 weeks!! Does anybody know of where to get the correct sensor for my setup for a good price? Lmk
I am looking to start building my back up 6 bolt n/a block. It's a straight block,it's just n/a. So I have all parts needed except turbo pistons,rings,oil pump,water pump,bearings,. I have 6 bolt rods,but if you have a nice pistons/rod combo i'll take it. Lmk, please TEXT ONLY 503-560-3482
I was there this morning,and they are 100% out of pump gas and were almost out og E85. From what they said,they are shutting down completely after the batch runs out. So the only two places i know of that still have E85 are Jays auto,and Olson Bros in Milwaukie. Just an fyi to y'all
I am trying to get rid of some parts to help fund my back up 6bolt build. I have a clean running 6 bolt n/a block that im wanting to build to have as.a back up. So if you have any parts like turbo pistons 1 or 2g,arp rod or head bolts,quality head gasket,new or upgraded springs and retainers,new...
I have some precision 880s that are in good shape that I am looking to trade for some good running 650s. I am also looking for a stock chip for a '90 awd manual talon tsi. Looking for someone local so I can just get this done. Reply here if you have either of these things. Thanks
I have a mojor boost or vacuum leak that is causing my car to run fully rich and bog down.Basically,i was on my way back from the beach last weak and was getting on it pretty good and it was running amazing.Then on the way back when i would give it any throttle it would go up to fully rich and...
Ok first i will start out wit5h my setup.It is a 90 tsi awd with a 20g,880cc precisions,3g maf,afpr,wally 255,greddy rs bov,3inch turbo back no cat,on a dual map chip for e-85 and pump gas with injector/maf comp,factory boost gauge to knock gauge conversion,etc...
Yesterday i went to the beach...
I know this is quite the noob question,thats why i am posting this here.I just picked up a greddy rs bov since my 1g bov wasnt holding on my last dyno.I went ahead and crushed my 1g bov and it helped a little but still would'nt hold really well past 20 psi.I know 349whp is an ok number,but with...
I know its pretty ironic that i have a part out thread right below this thread and now i am needing parts that were on that car,lol. I need a rearend for a 90 tsi awd(i dont care if its 3 or 4 bolt,just need one asap!!) also 272-272,264-272 or fp2 cams for a descent price,and also a manual boost...
I am in need of a datalogger that is compatible with a 1990 tsi.I am also looking for a wideband setup.Would be willing to trade parts below for w/b or 1g logger.Parts for sale are-1g bov crushed-25$
ecmlink v3 usb to obd1 cable(never used)-50$
buschur racing polished exhaust manifold...
But most likely i am going through with it.I threw a timing belt that had 6k miles on it today,dont ask cause i dont know the reason yet.Im guessing it was a crappy tensioner but idk.I am buying another local dsm in the morning and am trying to decide whether i should hold onto this car and fix...
I installed a new clutch a couple of weeks ago since my old one crapped out on me.Anyways the clutch i got is a kevlar stage 2 clutch from o'reillys,when i got the clutch i was in a major hurry to get the job done since i only had 36 hours to get the clutch installed before i had to go back to...
Well today my car was running great this morning,then i stopped and picked up a pcv valve(been having a little issue with oil out the dipstick tube at high boost,nothing major) and installed it real quick.I went inside my work for an hour and came out and went down the street and everything felt...
I have had my rims a few different colors so far and want to get them powder coated this summer but dont know what would look best. They are 17in Nissan Maxima rims and they started alloy, then I ceramic rattle canned them gunmetal. I recently did them a nice rattle can dark bronze which I like...
I am thinking about going with link again possibly and wondering if there is anybody in the local(Portland)area that has a link 1g v2 or v3 setup for sale for a descent price.If you do happen to have a setup for sale in this area only,please shoot me a p.m.Thanks p.s. im setup as far as the ecu...
Ok,ive been going through numerous threads and im still not sure if i'm running the right plugs.I have a 90 gsx with evo3 16g,evo3 mani and o2,fic 650's,evo8 maf,wally 255,3inch t.b.e. (no cat),short route f.m.i.c.,m.b.c.,semi built head,b.s.e.,chipped e.c.u. for my setup (with phantom knock...
What does it take to go from a 1G-A eclipse rear end to a 1G-B talon rear end (Going to eventually do a H2 headlight conversion), Have friend who has everything we will need to do it for a good price, major electrical and fabrication?Hey, I finally got my 90 Eclipse GSX to have the...
I am needing some injectors for my 1g dsm.I am currently running 560's and need some 650-850cc injectors.If there is anyone in the Portland area that has any for sale that are in good shape for a reasonable price,then send me a pm or text 509-218-0145.If i dont find any local injectors today...
Ok i have been having possible vacuum leak issues lately.I was looking under my hood yesterday looking for anything out of the ordinary and noticed a big line cut off.Im not sure what the line is for,it is almost directly below the fuel filter about 6 inches or so and it comes out of the...
I installed a aem uego today that i bought from a local guy and im having issues.Ill start off with my mods-evo3 16g,evo3 exh mani,evo3 o2,wally 255,2g maf unhacked,evo 560's,264-272 cams,3 inch tbe(no cat) and other mods that would have no bearing on this issue.When i start the car it reads 14...
Im looking to sell my 90 gsx.It is running amazing ever since my rebuild and pulls hard through all 5 gears.I have a recent photo of it on my profile and the mods are all up to date on my profile as well.I dont want to part anything out at all,just sell outright.Anyone who has been in my car...
Ok i got a used oem radiator because my old one cracked and i have had this radiator for about 2 weeks so i dont think that the radiator has anything to do with it.As soon as i turn on my car the fan kicks on and doesnt shut off until i turn the car off.I have absolutely no overheating issues at...
I just got done rebuilding my engine, and my valve cover is now leaking. I bought a Hyundai valve cover (to replace mine that is leaking) that im told has no cracks, no leaking anything. It seems to be the exact same as my original valve cover, but it just sits higher. I got some (or maybe all)...
My car blew my Biss Screw this morning, and I just ordered a new screw,cap and o-ring, but I need to know what I can use in the mean time till it gets here next week. I taped a screw with a rubber washer on it right now so that my car runs ( Its my only vehicle right now cause my other one got...
Im wanting to buy a Palm logger for my 90 Eclipse GSX. If anyone has one or knows of where I can pick one up, that would be great. Feel free to send me a pm on here, or text me at (509)218-0145. Thanks
So my car has been getting a new engine due to throwing a rod, I got a new short block, then rebuilt it and there was rod knock. I got a new crank and bearings and installed those. Now theres no knock, but the oil pressure is low. It was 25lbs cold, and 15lbs warm. The mechanic is saying now...
Hey y'all. I posted on here earlier trying to figure out why my car wouldnt start after it got rebuilt.Well it ended up being that an injector was missing an o-ring, stupid mistake by my mechanic. Anyways, we got it going finally after a new block that i got from a guy that had good internals...
Heres the deal, I have a 7 bolt Non-Turbo Block with Turbo internals, and a 6 bolt Head from a '90 GSX. Im trying to get the engine put together, and am down to the very last bit. I ordered new headbolts, but the ones I ordered were the wrong ones. Does anyone know what size bolts I will need...
So my 90 GSX is at the mechanic because I threw a balance shaft rod, so I bought a new block since mine had a hole in it from throwing the balance shaft,so I sent my top end to a machine shop to get my head redone but when the mechanic cranked it up, it had no compression. He said he thinks this...
balance shaft elimination is something i've been toying with for awhile but didnt do it because of the labor involved,now i feel like an ass for not doing it when i had a chance.I thought i had thrown a rod in my 90 gsx because i was driving a couple weeks ago and turned a corner,let out the...
I do have a guy in Vancouver looking for one for me today but if that doesnt work out i need a 7 bolt awd flywheel to finish all the pieces needed for my build.I have a 6 bolt awd and 7 bolt fwd flywheel and many other parts as well that i can trade or just pay cash,either way doesnt matter to...
So y'all here is my situation.I threw a rod on my 90 gsx,so i bought a n/t 4g63 block with brand new turbo 2g pistons,1g big rods,and new crank.I have my 6 bolt head going to the machine shop tomorrow,and then being mounted on the n/t block after that with all new gaskets and arp studs.I am...
I put a thread on here yesterday about my situation.Basically what it is is that i threw a rod on my 1g gsx and i bought a n/a block that has 2g turbo pistons 1g big rods and and a good machined crank etc... so its all good for turbo.So i am getting my old head to the machine shop for hot...
Alright, i threw a rod on my 1g gsx and the block has a hole in it so obviously it's destroyed.Now i found a 7 bolt n/a 4g63 with 2g block,2g pistons,1g big rods,.50 bore over,new turbo pistons,new water pump,new seals etc.. for a really good price.I would get the complete longblock but there...
I have a quick question,i am thinking about buying a 7 bolt engine for my 90 gsx and it originally had a 6 bolt motor.So am i going to need to do any modifications to install this 7 bolt? I was under the impression that they were identical externally just not internally so installation shouldnt...
Ok i posted this in the newbie forum because it's kinda a beginner question.I've never really looked at the inside of a fmic but i had to get my car towed today because i threw a rod and the tow truck dented the bottom of my fmic.It is in the very bottom front center and it goes in about 1/4 to...
Well my beautiful 1g threw a rod yesterday,so this might be the end to my dsm project that i've enjoyed beyond words.Is there possibly anyone in my area that is capable of a rebuild that i could pay to bring her back that would be my first choice.I've checked around at some local shops and i...
Hey guys, just needed some advice. I have done some research and think I have valve stem seal issues. Over the last 48 hours my car has been having a blue/white smoke at idle. It doesnt smell like coolant at all, so after my research, and because its just at idle, I think it might be valve stem...
I dont know if its coincidence or not, but my FMIC sits a little lower on my car than most peoples, and today it scraped a bit when I was leaving a parking lot. Shortly after that, my turbo started acting funny, it will boost to 5 then drop back to 0 like I left off, but I dont. Could it be that...
Hey, I have a 90 gsx turbo with walboro 255, EVO3 16G,heavily ported evo3 manifold and o2 housing, turbo back exhaust (w no cat), 2g maf, punishment fmic and 650cc injectors. I figured that with the injectors, maf and walboro 255 I would be running a little rich, but the last couple days my car...
I have a 90 gsx mods-evo3 16g,evo3 manifold,evo3 o2,walbro 255,650 fic's,2g maf,fmic,mbc,3 inch tuboback exhaust(no cat).Now that that is out of the way,my car is running beautifully strong right now.I am reading in the ideal range on an a/f gauge,but i had to give the a/f gauge back to my...
Once again i have an issue with my 1g.I installed a fmic and in the process i had to unhook the cruise box and slide it to a different part of the bay..When i first started it after the fmic install the idle was at 2100 so i turned it down.Then i went for a ride and it was awesome and boosted...
Hey, I have a 90 gsx turbo with walboro 255, heavily ported evo3 manifold and o2 housing, turbo back exhaust (w no cat), 2g maf, punishment fmic and currently 450cc injectors. Heres my question though, I want to hook up my SAFC, but I bought it used and got no instruction book with it. I have...