I have a 4 sets of replica wing screw covers left for sale. Also 2 sets of lower rocker retainers/clips (these hold the side skirts on. These are 1ga talon parts made of abs plastic. Message for prices.
I am selling a set of lower rocker panel clips (new, made of ABS) for 1ga Eagle talons. This clip the rock panel or side skirt to the chassis/pinch weld of the car. I have 1 set left right now. PM for info if you need these.$20 for the set $3 shipping for the 48 states and $1 pp fee.
Selling sets 1ga Eagle Talon wing screw covers. Raw unpainted Black ABS. This is the cover for the wing screw right behind your door frame. These are/were held in by double side adhesive but can be held in by the adhesive of your choice.I have 8 sets left. These are $15 per set (2 per...
1). Any boost, vac, or exhaust leaks?
Boost leak tested 5psi above your max boost with no leaks? Tested to 15 psi, BLT keeps popping off. Tested
at turbo inlet and TB elbow. No leaks.2). Verified mechanical timing? Yes3). Verified base timing? Just bought a digital timing light and will...
I am just putting this car together. It's a shell I bought almost two years ago. I have the motor in and everything hooked up. 2.4 setup with custom evo turbo kit.
I had to fix the wiring from the po ripping out the turbo timer and gauges. As far as I can see wiring is good right now...
Okay so History is when I put this car(98 Spyder GS) on the road a month or so ago the alt was acting up. at times it wouldn't charge at all and at times it would. The regulator was bad in it and it would overcharge up to 19v. It ended up blowing out my high beams on the way to get my other...
He is a mod on a fb page I admin and said he was going on a short vacation to Mexico two months ago and no1 seems to have heard from him since September 3rd. He used to be part ofb the staff on here correct? Anyone know him personally or know what's up?
Okay I have a car I'm working on that will loses ground signal to #3 injector. It happens at random. Never happened while idling right few Times while city driving but most oftenly during Highway driving.
I can simply cycle the key and it will work again till it happens again. Which...
Turbonetics sent me the wrong turbine. I called in have them numbers for the turbo I thought it was and measurements from turbine inducer/exducer. Guy just gave me a part number and price. Said I'd call back and let him know. Well finally was given the money for it and called back have him...
So my engine is at 90-100psi now. Deff am issue with the Rings. Around 10-15k into its life the tbelt stripped at the crank. I did hit the valves but it did not bend any at all. Car did sit with the head off for air 2 months.Thing I noticed when I took the head off was that both...
Idk what to offer on this head and would like to know what you all think would be a fair price.stage 5 port and polish head, oversized valves, ferrea titanium valve train, reground 280 Mitsubishi cams). ^ has silver fadonza cam gears.Its a 6 bolt head I believe. I'd be using it in my 2g.
Thought this was an interesting design for an oil pan baffle. This engine/car is built for road coursing. This cost 400$.It has doors that let the oil in to the pickup on one side and not the other when turning either direction. Also has a screen in between the two plates.
Awd 7 bolt fidanza 8lb aluminum flywheel. Barely used. Like new. 150$+ shipping pp fees. Or trade for fwd one.
Evo 8 9.8t turbo with o2 housing 150$, good shape.
2g side mount (better then 1g) 50$ plus shipping.
Evo exhaust valves 45$ plus shipping.
Good 6cm turbine...
It was reading the other night and now I changed something and cant figure it out. Link shows. .04 but its actually .9 from the sensor. It'll go down if i rev it up but if not its constant .9.Also fuel trims raise straight to 16.8 when it enters closed loop and exhaust will burn my eyes...
Okay so Sunday morning I woke up feeling like crap I mean bad. I'm pretty sure is a favor I had cold chills was hard stay warm and my whole body joints are hurting. Tried just staying warm wearing closing then I got a hot tub and that help me for about 10 minutes then at that wore off and i...
Okay so there's a guy selling a bunch of trans parts and one of which is an lsd. He says the lsd is a factory lsd. I asked him about it and he said they never came with it but you could get it installed.This is for my gst. He says its for it. He also said he tried searching for them...
So awhile ago after an alignment i was told the caster on my FR wheel was off. They said it was the reason my car pulled to the right.Early this morning i went off the road when i lost control trying to miss something on the highway. I am not sure if this made the issue worse. But before...
This sucks. Same damn big peice of plastic in the road. Looked like a deer or something. Tried to swerve around and lost control. If only i had better rear tires or had stepped on it maybe to straighten out? Idk im lucky but it sucks. Drove off.I was going 75.the scratches on the rear...
Ok so I check my oil every so often and been noticing I am going through it awful fast. Every approximately 800miles my car is two quarts low.My car does not smoke at idle or cruise. I only get fuel smoke below 4k when pushing it. Other than that it never smokes. I am not sure how it is...
At the ER in spartanburg sc. My brother had a bad wreck on his way home from the drag strip tonight. Gonna be in icu for a, few days. All prayers and support is greatly appreciated.Bad concussion, bruised lungs, said some air had escaped the lungs, broken ribs.said Nothing left but...
Okay first thing wrong is that I cannot find the Mitsubishi connector for the scan tool. OBDII port is there but not the Mitsubishi connector? Cannot find this anywhere.This was also a problem with the car I wrecked. In the wrecked car I had the entire interior out and still never found it...
OK so lately I've been having quite a few ppl being azzh0les to me lately. Most of which are vendors on this site. Maybe not the vendors being that way but other ppl. With vendors every one I've talked to none of them ever get back to me. Some I've messaged others I've texted. They talk...
Hello all! I am looking for dsms in north and south Carolina to meet up and get a hangout going. (Of course dsms from any area are welcome as well) There is a local car meet in Colombia every Saturday. I don't always go but only see a few dsms when I go.I would love to see more dsms...
Just bought a set of these cams. Probably getting a 14b to setup with but with the t25 first. Anyone ever used these or know if I'll need a tune to drive with these. Any advice and help with what to follow these up with is appreciated thanks. Car has15k on rebuild so I'm on the upgrade path.
Okay so lately my car has devoleped a weird problem with the cluster. The brake light battery light and low coolant light are coming on sometimes dim and sometimes strong.When I rev the engine the lights go away. When it drops down the lights come back on sometimes and other times they...
Okay so yesterday since my turbo seals have been leaking for a little while now nothing super bad as its my dd. I decided to clean everything out from throttle body to MAF pipe. Found a bad coupler leaking some serious boost I'm sure. Which would explain my horrible time at the strip the...
Hey I am fixing to paint my 3g rims on my 2g gst to graphite and was wanting to know if anyone else has graphite colored rims and could post pix of them. Or if anyone has painted their rims graphite color. Post pix I'd like to see how they turned out. Will post pix of mine when I'm finished...
So basically to start I have always like road course races and autocross. LeMan races are the kinda thing I like to watch. I wanting to build my 95 GST to be one bad street\road track car. I do not wish to make it an awd. Maybe on a different build on a different car but not this one. I am...
Okay so working on my car. 95 gst. I am changing my interior from leather to grey cloth, installing boost and temp gauge. Rewiring my fuel pump and stuff. Anyone have any tips or opinions on tucking wires and cleaning up the engine bay some. Just looking for some info and thoughts. Also...
Okay so I've searched, googled, researched to the parts, asked people and asked the dealer who said "idk how to help you on that one man". And so far no luck on figuring out an answer to my question. My question is what kind of engine do I have? I know its an evo engine, I bought it from an...
ok so got a 95 gst that i just rebuilt the engine in. Everything in the engine is brand new besides crank, rods, and the rocker rollers. New crank sensor and cam sensor. Changed the maf with another one i had, changed the map sensor, tried another computer. I've looked at it a ton and my...