As with everything, I tend to wear away from the normal. So here's my paintball gun, just finished. I'd have done it myself if I had the time, but wow. Aside from being morbidly ugly, it's gonna rock. http://www.network54.com/Hide/Forum/message?forumid=9013&messageid=1058938734

As with everything, I tend to wear away from the normal. So here's my paintball gun, just finished. I'd have done it myself if I had the time, but wow. Aside from being morbidly ugly, it's gonna rock. http://www.network54.com/Hide/Forum/message?forumid=9013&messageid=1058938734

As with everything, I tend to wear away from the normal. So here's my paintball gun, just finished. I'd have done it myself if I had the time, but wow. Aside from being morbidly ugly, it's gonna rock. http://www.network54.com/Hide/Forum/message?forumid=9013&messageid=1058938734

As with everything, I tend to wear away from the normal. So here's my paintball gun, just finished. I'd have done it myself if I had the time, but wow. Aside from being morbidly ugly, it's gonna rock. http://www.network54.com/Hide/Forum/message?forumid=9013&messageid=1058938734

As with everything, I tend to wear away from the normal. So here's my paintball gun, just finished. I'd have done it myself if I had the time, but wow. Aside from being morbidly ugly, it's gonna rock. http://www.network54.com/Hide/Forum/message?forumid=9013&messageid=1058938734

Long story short I bought a "project car" that had everything gutted in the trunk. Well the top will not go down and there is no switch in sight. Can someone either take a picture of the switch/plug or tell me the wire colors. Thanks for any help guys. It is supposed to be behind the drivers...

ok....i am going to, once and for all, relocate my supra SMIC up about 3 inches so the stupid pipes wont drag on the ground when the car gets shocks/springs and subsequently gets lowered. ok, now i need to basically cut a big hole where the stock airbox would be to accomodate the top of the IC...

For those of you who don't know, its Biketoberfest here in Daytona. I got to our meeting at 8:30, of course no one is there yet because they are always late, my buddy Louie called me and said he'd be there at like 8:45. So I get there and see these jackasses doing wheelies and shit on scooters...

Ok, for anyone using an intake system without the MAF in draw-through (Translator/VPC, Speed Desity, GM Maf in blow-through, etc.), this is easy.There are several ways to go about doing this.One way is to purchase a 90-93 Honda Accord Ebay 3" aluminum intake for around $35 shipped w/...

Well I got a great deal on some yokohama 235/45/17's from my buddies SR20. Ok, so I went to get them mounted, fully aware that it'd be a close call. We test mounted one in the rear and found about 1-2mm of clearance. This makes me a little nervous, so I had the old tire put back on. Now what...

This. Got bored one night. Its a mix-n-match of destroyed t25/14b parts. I plan on putting on a real lampshade a little later. May end up ebaying it off. So whattya think?

Ok, I got a new power wire, as the manufacturer recommended, but will I need a new alternator fusible? I know our stock one is not over 100 amps.

Was wondering what sites had the 6mm offset Wiseco's cheapest? Where did you get them from? Were you satisfied? Any problems with pistons meeting oil squirters?Any other recommended brand of pistons? Thanks!

I remember awhile back, there was a thread that gave some info on running a 2g MAS blowthru. Just wondering if anyone has any info on this as I cannot find the thread for the life of me! If I remember right, a few 3G guys were doing it. Thanks for any help.

Well, I bought a sandblasting cabinet. I plan on mainly sandblasting valve covers, cylinder heads (outside), and just misc metal pieces. Whats a good choice for a media? I assume glass bead (am I right?), but I have no idea of the grit size that would be best for my application, I'd guess #6 or...

Hey guys. My interior panels are painted white (previous owner) and all dirty looking. I've been meaning to get rid of this for about 3 years now, and I am dedicated to getting it done soon. So my question is....does anyone have any pictures of a good looking interior? Not some red, blue...

90 N/T 2.0. This sounds like a head going bad, but maybe its something else. When we first got the car, it was idling bad. We changed the plugs/wires. The #3 was smashed (not damaged, just had the tip smashed onto the electrode). We thought cool, thats why its running shitty. But at the same...

You try...twice...to use your cellphone as the faceplate for your CD player...:shhh: (yes this happened today)Thought it may be amusing if we all shared a story or two such as the above.

I am clueless. The shop manual or haynes do not even acknowledge this parts existance. Cam Cap Galley, Cam Cap Guide? I dunno. I need one from Mitsubishi though, soon! Lets see if you guys can get this.....its the thin hollow tube pressed into the head that the camshaft cap lies on...

Kind of...:cry: I got everythign on, then put coolant in, and what do I see, cooant leaking. Its coming out of the water pipe where it meets the water pump. I'll drop the turbo a lil and try to pull it out so I do not have to drain the oil. All the pounding on the waterpipe probably owned the...

Anyone here (prefer FWD) have any actual track times on the 50trim (or similar)? Yes I know about DSMtimes. Just curious...bored @ work.

I plan on building the car up slowly...50 trim maxes out at 450, so I want to plan for 450hp just for safety reasons (I'll prolly run for 350-400 @ 22psi at the end of it all). a: Pistons? I am thinking of sticking with my 95 pistons. b: Rods? 1G big rods seem to be the choice. What year or...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33621&item=2462049338He's got awesome feedback...just wondering if anyone is running these. My goals are ~300-400hp.Should I opt for new valve guides as well?

Ok, I see 2 types of bypass valves on ebay. One is just a filter that will always be open, which is stupid for cold air intakes. The other is the AEM bypass valve. Is this an actual valve that will be closed unless the regular filter sucks up water? That would be what I want (this is for my...

Anyone have the specs (resistance) for 2g 95 Cam and crank angle sensors? I need to test mine as one or the other might have gone bad! Can't find it in the shop manual...or anywhere.

Will this work in a 2G. I have a nagging boost leak around my TB/intake mani...nothing seems to be able to seal it (please fdont give me advice on sealing it). Now I have this 1G NT TB...it is big, and seems to match up perfectly....this would make my life easier b/c I really ahte that TB...

I have the trailer video everyone is looking for...just that I do not have the means to host over 50megs. Anyone want me to email it to them?

Here she is. It's a 98 Accord E-Bay 3" Intake w/ filter. Costs about $40. Had a bigass hole from the old Supra SMIC, so thats temoprarily covered with some black rubbery material stuff. Like?

I rigged up a nice $100 FPR (cosmo racing...ebay) on a 1G fuel rail. before I rip everything apart, will a non-90 fuel rail fit on my 7bolt? I know their diff lengths, but the mounting points seem to line up.If all goes well and this thing doesnt turn out to be a POS, I'll have a $100...

Are the FWD and AWD clutches the same? I know the flywheels are different..Is there any way to make an AWD clutch work in a FWD car? (Use the AWD flywheel in the car?)Thanks. I really couldnt find any info on this.

Whats your opinions on this? I saw one yesterday. I love the way it looks. Don't really know any specs on it, but opinions seem to be mixed.

Will 245/45/17 tires fit on 17x8" Koenig Monsson rims? They are standard offset, but will the tires rub? I may have to downgrade to 16" rims to fit greendots on :(

Ok, well I am going to FL tomorrow...in about 24 hrs exactly. Now I want to know what limits I should put on myself when leaning out my fuel trims (MAFT) to get the best gas mileage. I will be doing NO spirited driving at all....just shitty boring driving with my piranha and turtle by my side...

The vfaq really doesn't show how to remove the stock flapper. Or did I just miss it?Anyway, how would you recommend that I go about removing the flapper? I need to port the hole out, then put the flapper back in. Thanks.

<div align="center"> <p><font size="6"><strong>Installing a 1G (91-94) TB on a 2G</strong></font></p> <p align="left"><strong>Why?:</strong> Increases TB size from 52mm (2.047 in.) to 60mm (2.362 in.). Top end is badass. Nuff said.<br> <br> <br> <strong>Which...

Well, after driving I felt a lil bottom end, but when I went for a cruise on I-80...WOW. She kept pulling and pulling really hard...harder than I ever imagined from a t-25.....I'd recommend this mod to all 2Gers....even those with basic mods. That 2G TB is SOOOOOO SMALL.12mm socket (a...

Well, I am about to install my 1G intake manifold...but...there are NO vfaq's on how to do this. Is there one out there?So it seems I have to remove the fuel rail and injectors just to get at the top bolts. What does it take to get at the bottom bolts? Any help/tips would be great!

Do these really work? Yea thats about it.

Ok, a few days ago my SRS light came on. Ok, took it to the dealer. I dont mess with airbags. Good thing too. The airbag computer died. So I leave her there.Now I was at work, and decided we needed a CD to listen to. Its about 10pm. So I hitch a ride with one of the drivers and stop by the...

Wow, funny stuff like this never happens to me...till now. I was an ass right off the bat (what me?, an ass, NO!). :) Changed his name to be somewhat nice.Some guy: back Some guy: sorry bout that szabaga: yo szabaga: np Some guy: u have a talon? szabaga: yup Some guy: cool Some guy...

As with everything, I tend to wear away from the normal. So here's my paintball gun, just finished. I'd have done it myself if I had the time, but wow. Aside from being morbidly ugly, it's gonna rock. http://www.network54.com/Hide/Forum/message?forumid=9013&messageid=1058938734

Yes I searched. I cannot decide. Both will be about $900 with internal gates. The PTE seems to be tried and true, but I am hearing very good things about the AGP. Here's the specs: AGP -49 lb/min compressor -50 trim T04E compressor -76 trim T31 turbine wheel -3700-3800 spool (think this si...

Judging from the source, this is probably fake. But the picture of the doll and girl is priceless. http://www.thesun.co.uk/article/0,,2-2003310256,00.htmlIf this a repost, feel free to whine, but I won't care.

Who here has an exotic or just plain wierd animal as a pet? Personally I have my sugar glider (flying squirrel thing), and a piranha (his name is Chompy). Used to have a pet bluegail too....you know those fish that are dumb enough to bite a fish hook without bait on it. So what choo got?

<p align="center"><strong><font size="6">DIY External Dump O2 Housing</font></strong></p> <p><strong>Purpose:</strong> To help eliminate boost creep and make lots of noise under boost.</p> <p><strong>Disclaimer: </strong>Do not try this at home, serious injury could result. I am not...

A buddy of mine saw my custom O2 dump and he wants one. I just finished porting his, and once I get a new cutoff wheel tomorrow (damn cast iron), the cutting apart begins. Not sure how many ppl would be interested in this, and I really don't want to waste my time doing a step by step unless...

its 26x3x6. tube and fin. whattya think? i'm lookin to hit 13's, but nothing more.

Ok, here's my basic question. Will the O2 sensor readings be effected in any way since the exhaust from the wastegate will no longer be running past it. It seems to me that the lack of exhaust flow coming by the sensor (mainly at WOT when wastegate is open) would effect the O2 readings and...