So I have a seller who sent me pictures of his headstuds that he is selling. He said they are L19s but do not have the arp L19 stamped on the top. He put 6k on them. (Used headstuds of course) They look like the A1 H11....greyish silver color but some h11s Ive seen online have an extended tip...
So pretty much this happened for being cheap and not wanting to buy a legit t3 manifold and stick to my turbonetics manifold. I have a hy35 that I was trying to install but the 9cm housing touched the block so figured Id shave off in the housing and block...bad idea...I shaved off a lil too much...
Just bought me an HY35 since my garrett 50 trim took a poop. It has in and out shaft play like no other and smoking leaving huge bluish clouds. I could of easily had the 50 trim rebuilt but thought since people are making good numbers with the hy35 why not give it a shot? But by how much is the...
Hi guys, its been a couple of weeks that Ive been pretty upset. 3 weeks ago I went to the track with a couple of friends and accordig to the weather it was going to be around 70 degrees. It all turns out it was 90. Anyway I was confident to hit 12s but on the top end my car would sortbof like...
Whats up guys, I have an evo 16g for sale. Letting it go for 350 obo. It has been rebuilt and has around 5,000 miles on it.The flapper is welded shut to run an external WG. I will include stock internal wastegate incase you want to grind off the welded flapper arm. Great turbo. Im selling...
Hello all! Im looking to buy a boost controller and I need it before thursday! Ive asked local dsm'ers but no luck. Im trying to see if anyone in san jose area has one. Thanks.
I tried looking it up but no luck. Found some posts but didnt help much. This happened after I took out the turbo to fix some leaks and I cant seem to find the problem. I even checked dsmlink's settings and nothing.:confused: It activates at 4000 or wherever I set the launch control at. My speed...
1991 mitsubishi awd gsxAll stock gsx. Selling for a friend that decided to just drop out since he can not keep up with DSMs after all lol. Not much to say since its all posted on craigslist. Just trying to help him get rid of it.
Wtf dsm flip up lights - YouTubeThis has been driving me crazy. Any solution to this? My waste gate melted the plastic black and black tape covering the wires going to the alternator. Wires weren't peeled but any possibility the heat screwed this up?
Ok so my alternator went out and replaced it today. Once I turned it on, I turn the headlights on and they popped up and down continuously on their own for a couple secs then they stay shut. It looks as if I have a 1gb front end at night. Could there be a short or something? I know my wastegate...
I'm getting frustrated with this thing! here is the link to my other post. Im hoping the nor-cal crew can help.http://www.dsmtuners.com/forums/tuning-engine-management/454344-lc1-wideband-frozen-22-4-a.htmlIm about to tell this thing and go AEM
So I bought a used lc1 wideband for cheap and last week I hooked up the lc1 and everything seemed to be working fine except the led burnt out since it wasnt working and the gauge shows a solid 22.4 when i fire up the car. When its on the "on" position the gauge shows 7.4-8.0 up and down..... I...
So I had a friend weld the flapper arm shut for me to run an external wastegate off the sbr manifold. Made the hole, installed it, boom no more boost creep. My question was, since its a turbosmart ultra-gate 38mm with two boost nipple/ports I hooked up the bottom port straight to the j-pipe...
SO I've looked over and over that I even purchase one of those kynar u.s. plastic check valves with a new oem pcv and put it on the car. I redid a BLT and notice that the valve cover breather nipple was still leaking some air out. I fixed some leaks on the car and I can pressurize the system to...
I just bidded on an ultra gate 38 for my dsm since im having boost creep issues. I notice the new ultragates look different. Is this a scam or a genuine part?? Its going on a sbr manifold with the wastegate flange. hopefully it doesnt interfere with the power steering pump on my 1g...
I have a leaking 90 tb and might as well convert to a 91-94 throttle body. I will be heading to the bay this sat so if anyone has em for sale I would appreciate it! I believe the tps harness connecter will be a little hard to find but let me know! pm or text me at 1 831 269-4930 Angel. Thanks!
My car is my daily driver. rebuilt stock motor and stock head. My current set up is as follows:
mhi 16g
SBR race fmic
greddy type rs bov
SBR turbo manifold
3 inch downpipe/3 inch exhaust piping (magnaflow)
550cc
2g maf
Keydiver chip
190lph fuel pump
Apexi Neo
autometer boost gauge...
So Ive had this car ( a 1g dsm )for a couple months mainly parked after I did a stock engine rebuild 300 miles ago. (head gasket, piston rings ..) Lately after smogging the car and all Ive been driving it around town and last weekend I took it to san jose and when I was coming back on Monday...
So I removed my AFC NEO by removing/splicing some wires and reconnected a wire coming from the cars harness back straight to the ecu? hell idk how to describe it but the car runs fine without it. Now I drove it around, and when I parked it to turn it off the turbo timer didnt do its job. It...
Its getting annoying. I change the fmic, fixed the jpipe flange since it was warped and now I did a boost leak test and my boost gauge will only go up to 4 psi and thats it. I believe I have a huge major boost leak but cant find it????I already pulled off the actuator arm and adjusted it...
So after I bought my car thinking it had bad rings but turn out to be the toasted ebay turbo (still rebuilt the engine anyway), I sport a 14b as of now.The first day I ran the car with the turbo it ran good and did some solid little pulls to break in the engine. The next day however, I was...
So theres this godspeed 16g laying in my garage that happened to have a broken thrust plate. It was on my car since the day I bought it, right now im running a little 14b. Im thinking in ordering a rebuild kit from tradergregs and see if it can be rebuilt with the kit and make the gsp 16g worth...
This past week i just bought a front mount from a local member. He said it is the sbr race fmic, which is pretty darn big. So today I had the chance to install it and notice that it would hang from the bottom of the bumper. I searched for a solution and notice that I can bring it up a little...
Im looking to buy a used short route piping kit for my 1g. I looked up ets and hell , paying 350+ on a piping kit is out of my budget. Even if its just from tb to the intercooler thats fine. Let me know thanks!Anyone?????
I have a pair of used ground control coilovers for a 1g that i got as a trade from a friend. Got another dsm that already has coilovers on there so no need for these. Throw me an offer. Lmk thanks.
What's up. I'm currently in the bay from Salinas and I'm looking to buy a used in a good condition knock sensor for a 1g as well as an o2 and tps. Thanks! If you have other parts such as the flop up lights motor would be great.
So I was looking around for a used 14b on ebay and stumble upon this...Turbocharger Compressor Housing + Wheel Mitsubishi EVO3 TD05H 20G Upgrade 14B | eBayWTF? Can I really just switch out the compressor wheel and housing?:hmm:
So I installed my fresh head the other day and for some reason I FORGOT to bolt up the intake manifold to it. I figure blehh it aint no biggie but today I tried to bolt it up and omg.....no clearance at all!:cry: am I f**ked or what?:confused: I figured maybe removing the AC will give me some...
A month ago I got my hands on a pretty nice 1g gsx. Did a stock rebuild on her and Im hoping everything turns out fine. I just want to know what you guys think of this set-up for a daily driver with some balls.Stock 6 bolt head and bottom end
vr4 190lph (will rewire it)
apexi afc neo...
Im looking to buy a used set of aftermarket camshafts for a (my) stock head. Im looking at something like bc 272 that wont require springs and such. I have 1g ground control coilovers for trade. Let me know thanks!
My car has a smoking issue and lately Ive been driving it around like that since I have no choice but to commute to work and back with it. I decided it is time. Im looking to buy a stock 4g63 that is in running condition or midly built for a reasonable price. I do not have the funds to spend it...
I have a garrett T3/T4 .57 trim 60A/R from ATP turbos. God knows if it is ball bearing or journal bearing because I have no clue. Anyways, I am about to order a compressor wheel since mine are badly chipped and was wondering if I can upgrade to:Garrett Compressor Wheel, T3/T4 T67/T04R, 84mm...
Hello, Im new to this site and finally got myself a dsm after a lil honda that couldnt handle the boost. Anyways Im in the process of paying off this 91 gsx that has a rebuilt engine and ive notice that it smokes like alot. Ive been readin that the rings havent settle in yet or the valve guides...