I thought I would pass this on. Since tool storage can be at a premium, especially on smaller boxes. I didn't like the trays that come with extensions and came up with a easy cheap solution, easy to grab,and organized. Amazon magnet kits can be had for cheap then a small dab of hot glue keeps...

160 shipped

Was running the the jdm market place and found this. Its from a 3000 nt awd . It looks promising for a rebuild only diffrence is the bellhousing.

When I send the block , parts, and torque plate off. Do I tell them to torque the plate to factory spec or 100-110 ft lbs or does it matter?

I'm passing this on . After researching the size of the bolt needed and going to bolt stores, with nothing available, I had returned to the net search and found this. A company named Racetronix, the part number. FIT-PLGM1212. Again this is for a 6bolt.

For sale 800 plus shipping , new 0 miles going with a diffrent rod.

Since these platforms have been out thier for some time, Then what are the so called facts of staged build transmissions.. Rpm, torque,and hp capability and durability. I bought my built trans years ago and haven't installed it yet. Come to find out years later that I shouldn't push past 450...

Has anyone thought about having the 2g dsm knukles cnc out billet aluminum? It would probably cost alot? Or a magnisum alloy of sorts.

Is thier a chart for illustrating diffrent tps sensors. I purchased a knock off s90 and the 2g tps is to big .

Car overheard when it wants to , even with fans on full. New oem items, thermostat,radiator cap,water pump. After market items hoses misimoto rad and fans. Fan relay mod. 50 50 mix. Vacume filled. New belts. Muti layer head gasket with arp headstuds and retouqed. Compresion checks out fine. The...

I bought this gst a few months ago with the goals of having a zippy dd car. This is how I got it. motor install incomplete,sitting on 4 spares and all.Getting things wired up for a test fire.

What is the best location for a fuel cell ? I'm cutting out the rear seat pan and trunk pan.

The window switch bezel for a 2g spyder has to be the most pain in the butt part to find for my car. . I have friends searching with no luck and have extended the search into certain year seebring models with still no luck. If any one has a lead let me know. Oh forgot, its the drivers side bezel.

Will this work? Cooling line to the turbo normal. Exiting line to the wastegate entry.Then the exiting line from the wastegate back to the cooling system. Will the 4 an fitings on the tial be to restrictive for adequate flow? This setup would use only 3 lines.

welcome to my build thread. This car will be built for the street,drag,and auto cross. The car is a 99 gst spyder that I purchased for a grand. This is the car when I got it.

I have idea that im kicking around and wanted your opion. The back seat area is waste of space on these cars .what I was thinking was like a tonue cover of sorts that would close off the back seat area and would still be able to use the convertable top function. Possibly carbon fiber and have a...

My mother passed away this morning at the age of 63. She has supported me throught my years buy paying for school and what not. So im going to keep working on cars and what ever challenges await me and contribute the Dsm community the best I can.

I don't know what's is called. But the hot side Turbo housing? Well any way a bolt is broke off on the upper o2 dump housing. And I've tryed geting it out by welding a nut to what's left of the stud let it cool then heated up the housing and tryed to get it out with no luck. So I gave it a...

Was out in the garage and ran into a small problem. The 1g bov didn't fit the return hose. So I came up with this . I cut the snout of the 2g bov and slipped it over the 1g bov. Now I have to figure out a selant to complete it. It is a tight fit and the a hose clamp might suffice.

After having issues with his motor, a friend of mine wanted to fix his front strut towers on his car. Right now its the citing stage. This upcoming Sunday we will be welding in patches from a donor car

What other cars and such had the factory 10 disc changer and does it have to have infinity sound? My cartridge is missing.

Is their a roll bar out their for the spider. All im finding are cages and rollbars for the hatch versions, and seems kind of wise to put one in.

Well I would like to say I've joined the Turbo club. Well I found a good deal and threw out a price. What did I get? A 99 gst spyder. Goals go thru and get the maintenance stuff done and throw some parts at it. Parts will be diverted from srt swap car to this one and no the swap isn't being...

If u have a dsm weather its on the road or not, just tell us about it.I will start it by saying ive got one but its far from road worthy. So a thumbs up for a ride or im bring the Nitro to next meet.

Are their any guidlines for combing two disimular metals? Can you weld stainless to regular steel?

This my idea for the rear of the car. 99 eclipse gs with a talon low rise rear spoiler, and a dual center mount exuast. The car is black .

Needing a picture of the bottom side of a 2g awd fuel tank. Im thinking about doing a center exit exuast.

Needing leftover piping, 2g 420a rad,condensor,axel doesnt matter which side only need the outer part. O and a intercooler if priced right.

When u guys put a large Fmic in are you deleting the crash bar and mounts? With that stuff deleted are you doing any thing about bumper mounts under the headlights, or just letting it hang?

Which is stucturally more sound in a 2g dsm, sunroof car or no sunroof car? What I have found is that the sunroof car is structurally sound than the other.Reasons why.1 sheetmetal has more pull than push. So if u were to pull on a piece sheet metal from opposite sides, it would take more...

Well here it goes. Building a 2g eclipse srt4 conversion. And at times I get peed off and start thinking about other mods so as to keep me busy with out me blowing my own head gasket. After doing some research, i have bought the following. 95 talon tsi fwd rear brake setup. 3000 gt front brake...

Is the obx fuel rail ok for stock to mild hp?

The left front axel is it a solid one piece unit?

Whats involved with braided line, a n fittings and such? Im doing this swap and I need to understand whats in needed. And can u use this stuff for power stearing and cluch lines?

http://www.dsmtuners.com/forums/attachment.php?attachmentid=132553&d=1326372872.http://www.dsmtuners.com/forums/attachment.php?attachmentid=132554&d=1326372872This morning hit a patch of ice on the highway. I was doing thirty to forty mph got spun around...

Ok here it goes. I have a 99 eclipse and 2g talon parts car. Both cars have aftermarket radios with pockets under them. Both radios swivel. Am i missing a part? Tryed lining the radios with other holes but i cant seam to get more than one screw per side to line up.

Found 20 bucks in change a few crap cds, a package of enzite and and a unopened condom. .

Does the recerculate switch break often on a 2g? The base broke off, for the slider part. Cable seams to be free but found a bunch of crap in the console quarters,cds and other crap.

Need a pick of 2g gsx front suspension crossmember,and will the 2g gsx suspension crossmember bolt in a gs?

Lets see if i read everything right. 3000 gt sl front calipers and mounting brakets. SS lines for those and gsx rotors. Will clear factory 16 inch wheels. And will be a little better than the gsx?

Never mind delete post

The big green machine. It has a harley motor and does 50 mph, and cost 75,000. Doh whos gonna buy that for me xmas. Lol. Sorry about the pic was bored over at the inlaws saw it in a magazine.

What i need is a pick of ## washer botle 2g gst gsx and thanks.

Ive got low milage engine 60,000 miles on it thats been siting in a barn for 5 years coverd up. Im putting the motor back in and should i be concerned about moisture in the cylinders cause of condensation? Should i take out the plugs and spray something like wd40 in it or something else,or not...

I found out while reading that exughst manifold for the srt-4 was designed by mitsubishi. I wonder what else they helped with on this engine.

With the engines being opposite of each other and the driver located on the left side wouldnt the gs handle better?

Trying find the left and right door pinouts. And if possable all avail pinouts for the car. Ive download the wiring scim and cant findem. Thanks for the help.

how can i get pdf files off my phone to? paper with out a computer. The phone is a samsung galaxy s. The reason, looking at wiring skims on a phone is a pain when u have to compare a eclipse and a srt.

Is it ok to leave un hooked. The eclipse has the sensor on the pump, which im no longer using. The srt has it on the rack which i wont be using.

It was good to meet people that have passion for dsms. Ive learned alot more about the cars, and will countinue to learn more. I bought parts, talked,ate,and had a good time. Ill try and make it to more!