The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Rix Racing

Search results for query: *

  1. FP Green install, Zero Boost

    GOOD CALL!! I would put money on that! :hellyeah:
  2. A/F running lean

    WTF 120 psi!?! WTF i would say that either you have a fuel pump from god or your fuel pressure regulator is out of wack. not sure if thats your issue but you shouldn't be at 120 psi! Try turnning it down to where it should be at lol! :thumb:
  3. springs on stock struts?

    Ok but if your looking to lower it only an inch, as long as you get an alignment afterwards you should be ok with a nice set of springs like tien or ground control right?
  4. bad situation with my DSM.. Lost..

    someone save the eclipse from this kid!!
  5. '99 Eclipse rs Trans or clutch problem

    If your putting it in gear, depressing the clutch pedal and the tires dont start to spin then 99.9% chance your clutch is toast! pick up a new clutch kit and OEM throwout bearing and you should be all good to go!:hellyeah:
  6. New Talon Tsi with a bunch of upgrades!!! advice???

    With the walbro 255 fuel pump you need an AFPR (aftermarket fuel pressure regulator) to control pressure. It dosen't really matter which brand just dont pick up an Ebay one (i just really hate cheap egay parts). Your 550cc injectors should be fine for 16-17 psi but dont go much higher cc's...
  7. quick headgasket opinon

    Chiltons or Haynes manual will be your best friend! pick one up because it's worth the money
  8. Check out this front mount......

    Yes there was! I remember that thread and not sure if he actually did it but he had mock up pics and it was pretty ridiculous!WTF
  9. SYNAPSE Blow Off Valve

    I too run this valve and my friend runs one on his Evo 8. We both love the valve and holds up my 15lbs as well as his 29lbs no problem! rock solid boost control and great respones! No regrets and well worth the money!!:hellyeah:
  10. The ^ Game

    ^ wow how'd you know <is really wanting DSM link.... the last piece to the whole 320whp goal v will give me DSM link......right? lol
  11. Hesitation problem, feels like slipping clutch

    So if you don't have a oem crank pulley you can't check base timing right? Because like the underdrive pulleys don't have timing marks on them...
  12. Radiator and Heater hoses

    Thanks for the heads up!
  13. Another 1GA Ram Air Modification

    kinda seems small but good luck!!
  14. Need help on my parts list

    Run DSM Link or an AEM EMS and with the list you have there trying to get 400 whp would be easier to do with a 20G in stead of that 16g. Buy a fuel pressure regulator because you WILL need one and at least get a boost gauge and oil pressure gauge. Does that list include a new oil pump? what...
  15. About to install new head gasket soon, any precautions..

    Do everything by the manual and you'll be fine.... OH! and triple check your torque on the head bolts to make sure there all right and done in the correct sequence! Were here to help if ya need anything!
  16. DSM vs Acura Turbo vs DSM

    hondas :( lol
  17. Lowering Issues Please Help!

    Negative camber is what you see when a guy slams his car and the wheels are at an angle and tucked up under the wheel well... just google negative camber and depending on how low you go with the car you might not need to buy a kit!
  18. thought it was Engine / Exhaust noise but...

    do this to find out which one... turn hard to left and then turn hard to the right and listen. If it gets worse when leaning and putting more pressure on one side then the other than thats your bad one!
  19. CF or stock hood?

    I have had an evo style CF hood on my car for over a year now and i like it but.... 1) make sure you wax it to keep it from fading and looking like garbage and 2) with those vents being right over the valve cover i had issues with rain getting into my plugs and rusting them!! rust all up inside...
  20. Anyone running FP2 Cams???

    so if i'm running an EVO III 16G on 20lbs would a cam even be worth it? i shift at factory redline?
  21. Swapped the trans oil with mt-90

    I just had mine rebuilt through John Shepard stage 2 and got new clutch fork, pivot ball, OEM throw out bearing clutch and flywheel. my question is it's only got 756 miles on it but all the gears feel fine and shifts good but when rolling i have trouble getting it into first like 5 to 10 mph and...
  22. What did you do to your DSM today?

    washed, waxed, and went for a drive to no where.
  23. Pics of my New Side Exits

    i like it! now you just need to tint the windows and drop it an inch or two!
  24. 1g or 2g for build platform

    Seriously it comes down to preference and what you can find. I like the looks of the 2G so i went with that. I have trouble getting parts for my 98 2G at the dealership so if i have issues a 1G would prob be near impossible dealership oem parts that is. what do you think looks better? pick that...
  25. Shepard Transmission

    So i just purchased a bunch of goodies for my TSI!:hellyeah: I picked up a Fidanza flywheel and 4.3 clutch, EVO III 16G turbo, FMIC Kit and some other little things but what i'm really interested in is my transmission i just had rebuilt! i had Shep trans hook me up with a Stage 2 transmission...
  26. Which Spoiler looks better?

    if you don't go highrise i will be sooooooo mad at you!
  27. help fresh rebuild serious issues

    Hey man good luck! I subscribed to this thread! I want to know how this all plays out!
  28. Music you're listening to..

    It's all about Disturbed and Avenged Sevenfold!!!!!
  29. 13b?

    Yes! There is no need for a FMIC on a stock turbo on 15 psi.... unless you like the look! I know i do and just bought the PR FMIC for my TSI! I'm running an EVO III 16G. and i have no isues with most of the 4.6 v8 stangs around here! I'm just saying the 16g would be the best bang for your buck...
  30. 13b?

    Are you talking about a 14b? Well i guess it dosen't matter a 13 or a 14... either way there both a bit bigger than a T25 but there defiantly no 16G! you hit 250 to 275 hp and you've about maxed that turbo out. If i was u i would just buy a 16g considering it has almost the same spool and it...
  31. Really low vac with 274 cams

    I don't even have these cams and i want to know how they perform with the adjustments lol! good thread!
  32. cheap tubualr manifold???

    :mad:Cheap manifolds, Egay turbos, and boost leaks anger the DSM Gods!!:mad:
  33. Garrett FREIGHTLINER Intercooler

    WOW! this is crazy and completly stupid but i think it's funny how people are getting so heated over a car that's not even there's lol! to the OP do it man lets see a video of it driving down the road lol! seriously do it!
  34. Questions for Justin...

    Ok so I have a question! I'm dumping a ton of money into my TSI right now and one of the things i picked up was a new EVO III 16G. Not that egay crap:nono:. Well My car smokes during boost but once i get off it and start slowing down it'll blow a good bit of blue smoke for a second or two! The...
  35. If you like fat chicks...........

    You got my vote:nono:
  36. Why do i keep on blowing head gaskets!!!!!

    What You need to do is get a set of ARP head studs. Then pick up a MLS headgasket. Finally get the block and head checked for any kind of warp and fix any that may be there. Once that has been done use a different torque wrench then you have been using to make sure it's not a bad torque wrench...
  37. Full megan racing exhaust install concern

    if you have a welder you could cut at the flange and rotate the pipe just a little bit so it dosen't hit
  38. smart dsm experts help

    if there both for a 2g turbo and there stock there prob the same ecu. get the plugs we told you to get and go from there after you swap out the o2 sensor. Maybe you'll get lucky and the sensor will be the issue. you don't have some sort of fuel tuning done to it right? apexi, dsmlink, aem ems...
  39. Oil Pressure Gauge install question.

    yeah and if you wanted you might be able to just tap into the lines and they might both work. if it was me i'd just completly disconnect the stock one and use the aftermarket gauge.
  40. 1G Individual cylinder misfire

    no spark huh? you sure your coil packs are good?ECU - wires - coil pack - sparkplug wires - sparkplug Gotta be something in there....
  41. Oil Pressure Gauge install question.

    well put lol!
  42. First time DSM owner questions.

    since its a 1st gen don't worry about crankwalk. get in the car and use EVERYTHING!! go through all the gears flip all the switches and listen to anything that stands out. clunks, scrapes,ex plosions..... If you like it then buy it. What's the mileage?
  43. Just did compression test pissssed!!!!!

    Boats and Hoes! lol:ohdamn:
  44. 's' shaped fans or straight?

    I don't think it matters to much. There both designed to cool and 2 of them should easily do just that. pick which style you like!
  45. Show me your clean engine bays

    LOL! AwesomeROFLROFLROFLWOW! I haven't seen one that's that stock in quite a while!
  46. Just did compression test pissssed!!!!!

    YES!! Continue to drive the car hard! 3rd and 4th gear pulls are the best for long hard pulls. If you baby the motor during break-in you don't create enough pressure to compress the rings against the cylinder wall and seat them properly. If you get on it with 3rd and 4th gear pulls (at least 3/4...
  47. External wastegate noob question

    Here's a question for you guys! I'm going to run a 16G and i have an external setup with a 38mm Tial wastegate. I hate the sound of the wastegate opening and want to recirculate but i don't want to use the stock wastegate on the turbo due to boost creep issues. has anyone used a o2 housing that...
  48. Helping finding my problum with smokin after boosting hard

    Not trying to jack a thread but a quick reply would be nice. I'm starting to smoke blueish color like if i were to rev it it would smoke a little bit after the rev and it blows a lot of smoke during and after boost. The thing is the turbo has excessive shaft play like if i were to pull and push...
  49. Say Something About The Person Above You

    ^^^^Beats his ho's with a golden dildo straped to the end of a pimp cane
  50. Never been drunk?

    :toobad::toobad::mad::notgood::ohdamn::tease::aha::nono::cry::|:pray::sosad::barf::rolleyes::shhh::boring:WTFOMG:hmm::applause::coy:Guess what i'm thinking?
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top