It’s a c7 turbo t3 no shaft play came off a running vehicle. Nothing wrong with it it’s a 60 trim turbo with v band exhaust. Only asking 300 plus shipping and fees

All buyer pay shipping and fees. Make reasonable offer 2g rear main seal. Make offer 2gb fog lights. Make offer 2g clock springs. Make offer 2g cruise control cable to pedal. Makes offer -12 an fitting with hose. 24 inch long. Make offer 2g front and rear tranny mount. Make offer 2g auto...

2g front splitter-100 bucks you pay shipping Hallman manual boost control-80 shipped Saturn alternator pulley one the smallest one is to have more spinning while at idle giving more voltage- 40 shipped for smalled one and 20 for the oem one 2g seicana Android radio tablet-100 shipped It brand new

During a car meet I set up anti lag. What you guys think ?I got more video on my channel

Selling this fog lights might have to replace light bulbs but that’s all. No crack and cones with bracket Asking 35 for them not shipped or fees

1999 mistubishi eclipse gst-x Body overall Car has zero rust Texas salvaged title Vis carbon fiber hood Salvaged title Has d2s projector retrofit Rpf1 17x9 with 245/45-17 Fully k-sport coiloverInterior Evo 8 steering wheel with airbag Evo 8 seats with custom bracket Megan racing shirt...

95 dsm wiring harness unhack 80 and pay shipping

I just need the spacer that’s on the subframe bushing e

Yes I’ve done my research but I want to ask to make sure. So my car is a 1999 I have three switch. One for cruise other for idk and other for clutch. Can I just ground the cruise control switch and it active no lift to shift. Seen it somewhere. But can’t remember where it says you can do it

Unhack 95 talon wire harness for 100

warren submitted a new DSM Profile :MushuRead more about this vehicle here...

Good condition 7bolt thermostat housing for 30 shipped 7bolt cam shaft sensor for 30 shipped 95 talon antena for 30 shipped I also have door handles Rear hatch strut new

Awd swap So I’ve been reading but can’t make Sense of it. So I’ve Grounded the yellow/blue from the pig to the car wire fuel goes half way. Did same thing with yellow/black from the driver side plug goes to full. Now I didn’t ground the fuel tank. Didn’t see No wires for ground when I did the...

Selling both Uncut wire harness off a 95 talon for 100 2g shifter cable for 80 Buyer will pay shipping and fees

Make an offer and it’s yours. You pay shipping that all I ask or it’s all trash

It’s a hood promp strut that’s was how to do one for online. Bought for my 2g by accident didn’t work. Not use once

This is the last thing I have to finished my car. Bought the hanger used and spent too much money already. Is there any way to fix it like cutting the fwd line off and welding it on there or cutting the fitting off. Yes I’ve been looking at putting an fitting on it but kinda short on cash

Everything for sale before it hits the junk yard next week. No side skirt. Name a price and will discuss im not asking for a lot

Selling this bumper. Not sure what’s it’s worth. But will take offer

Selling this not sure what brand car back. Works not holes or rusted. I got video of it on with stock down pipe. Bolts right up the cat. 250

Has anyone done this. So my buddy has a evo 8 he just got. Saw the front fan that’s the plastic it’s 13 x3 inch. I’ve looked but haven’t found. Has anyone put that fan in front of the radiator

2g spiller for sale. Made out of fiberglass. It’s pretty great but not my tastes. Comes with bolts and rod Only asking 250. Without shipping

Selling an fp manifold ceramic coated by dectevive coating and fp manifold with hardware 350 for both will not separated

So the car build boost normal if I have 50% but when I do 100% throttle the car hold bag like it’s building boost at a certain psi then finely let’s go. Anyone have any idea

Can’t fix that at all. So I did a boost leak test and I hear air leak from the throttle body itself. Not from the shaft seal but from play from the throttle body plate. Is it normal ?

So I currently running sd on my car. Was wondering where could I get a plug for the blow off vavle plug hole on the intake ?

So I've tried everything to to bring it down. The Ian on link its currently at 89 at idle and tried everything to bring it back down. I've rebuilt the whole throttle body. I've done a boost leak test. now the iac when I pulled it off its not turns a little bit but not much. I've check the ecu...

Looking maybe to sell this tow hitch for a 99 eclipse. Wondering if it's worth selling

So ive having problem where when I unplugged the front 02 the reading on link is .4 but when its plugged in its at 0. volt I bought a brand new 02 sensor, and still nothing. now I have changed the plugged for the front o2 because the harness on the plugged wires where cut off on the red wire. Im...

Lets start with I finished building my 2.3 stroker, and had the wire harness removed. I plug in everything needed to start. The only plug that isn't on is a 4 wire plug near the starter. The rest is two plug for emission. I've noticed when leaving the key on the isc motor gets really hot. I'm...

Does anyone have the dimensions of the bracket to hold the evo 8 brembo? I have autocad but do not have those dimensions. I can program anything in return

Not sure where to post this at all. But has anyone ever thought of mounting the front and rear caliber on the back side? It would help on having the car nose dive every you hit the brake at the track

I've searched everwhere but I got a -6an line with banjo bolt. Now what size or what can I do to put a -6an banjo bolt on the oem fuel filter ?

im running a fpt-28 with 272 cams and ive been trying to tuned the car for awile knock and im knocking any adviced please

I've found this guy on Facebook, he does a bunch of ram air headlight for different cars. He's asking if anybody would be intersted in buying this

http://www.dsmtuners.com/forums/articles-drivetrain/391409-equal-length-half-shaft-2gs.htmlOn that thread it says you have to open the tranny and put in awd differential Question is can you just put the intermiated shaft and axle without doing all that ?

Guys I got a problem I'm not building any boost at all . Mod are. 272 cams,dsm link, t -28 , Evo 8 spring and retainer and fp manifold , heat barrier gaske . Emission deleted Can you anyone help

Sorry can't find nothing on what I needed . But I'm my car turn at hight idle then dies for. 3 or. 4 second. I got 272 cams and got link . Is it a sensor problem or need a tune and if it does how ?

ok heres my story, i bough a new head from a guy here on tuner and i got it all and decided to cleaned before the install, and i went and go ahead i order some BC 272 cams from miller imports, and got my eve 8 spring and retainers from STM and I'm using the stock valve from the DSM, ok...

Let me start with saying I love mistubishi' My first car was a 98 gallant es , motor went out on it, was working at pizza hut at that timed and found this 99 eclipse gst Didn't know squad about the carSo drove this car for work, around 2 mouth later started modding took the enkei rim...

My huge problem is one of the intake side lifter won't come off .(Thanks to westside performance ) . My homeboy tired everthing from pulling with plier wich pull the top part out . We've been heating it up , and no luck . Now I'm asking you guys if this ever happen to you befored, and what did...

Got huge problem and trying to track it down . I've pulled the rocker arm and changed it and the revised lifter collapse putting it back , so I'm changing that today . My problem is when I 2step with 30% throttle it's fine when I ad more throttle it make this weird sound like a bad bearing...

I've got a huge problem. It's a idle and while driving. My dsm link say I have 3.2 at 2100rpm and above. My homeboy and I check the balanced shaft, removed the plug while running and spark plug. My wideband reads 14.7 at idle and same while driving . Any of you guys can help ?

Trying to pass inspection not visual for the cat because car sits too low . I do have a dsm link 2.5. I found about this palm version , do any of guys know where I can get that or what else can I do expect putting the cat back ?

Weird Thing The Dealer i Bought this car from his exsuse for this shit happing its because its a Race car. Now can anyone explain me how that hell does a ball joint nut just comes off without even thouching.Never touched it once but it caused me to bang my head 10 times on the roof while...

Mods is 3G rear control arm with k-sport coilover and sti wheels with adpater.I having a problem that every time i stepped on it, I cant keep the car straight at all or if i hit a bump, now i know i dont have enought power do shake the car ass. What could it be?

So i haven't seen this anywhere else . My friend with his 4g69 left his OEM crank pulley at my house . Ive put it on my car And it line up right and everything. Question his can I run with it ? It's lighter than our does have the aletetnator pulley on it or grooves.

(Saturday we will meet up at Happy(time yet to be decided), then cruise down to San Antonio, stay the night and come back sunday night. plans are to meet up with all the other 4G's, Eat dinner, hangout go by the river walk, and sunday having a big bbq The meet up spot is North Loop 1604 E &...

My homeboys that drive eclipse are setting up a cruise on April 6 2013 It's a long cruise Great people . We we have or try to have every generation eclipse, for sure 4g, and / 3G but see if anyone interested .

My homeboy 07 eclipse gs . (4g69 . 2.9) So here is the deal he blew the motor over shooting his nitrous , and we replaced the piston from 9.5 to 9 compression and now we having a problem that the car runs fine but when it gets around 5000k and it get no mivec but it keep on getting up there no...