How does this sound for a block vent baffle? Yes I have read all the other posts about block venting. I don't want to have a hose running all the way around my block. Read more and you will understand.I am building a 500-600hp 4g64 (4g63 head) for my RWD car and I am planning on putting a...

I was wanting to know if a Evo 8 (2005) turbo manifold will bolt onto a 2g head? I'm installing 2G motor into my RWD Starion and the Evo 8 manifolds woild be a better fit in my engine bay with a Holset if it will bolt to the 2g head.

I have a bunch of work projects going on and I can't seem to wrap my mind around this.I completly understand how a normal turbo, wastegate, and boost controller work. What I'm not 100% clear on is how an electrically controlled (when it is finally made) HE351VE VGT is supposed to work with...

I am thinking about buying an HE351VE but I will need to clock the exhaust housing since my car is RWD. Does anyone know what the limits are?I keep seeing mention that they can be rotated but that you have to be careful of the oil holes. There are three sections; the center, the compressor...

I'm planning on getting a Tilton Engineering 40-524 Oil Cooler Pump for my car but I have a question about the forward facing oil filter housing (FF-OFH).How exactly does the oil bypass valve in the filter housing work?I will be using a remote filter adapter and the Tilton will be...

A lot of the threads that discuss replacing the standard power steering with an electric hydraulic power steering pump almost always use one of three models: the 91-95 MR2 (no attached reservoir); the 2000-200? MR2 (with an attached reservoir); or one that has been imported from Europe.The...

I'm trying to figure out how to mount a belt driven vacuum pump to a 1G motor but I don't have a full motor to look at right now.I need pictures of a complete 1G motor with the power-steering, AC, and alternator with the belts still on with the motor on an engine stand.Multiple angles...

I am going to be putting together g4cs soon but I have a couple of questions that would be best answered by some pics if anyone can send them to me.I only need pics of the front case with the and oil pan/pump, etc. I found a number of great posts on the site but all of the pics are missing...

I'm looking for a flywheel for my build but I'm having problems finding exactly what I want. I've looked at several on the internet but the descriptions are almost always a little vague or just flat leave out specific info.What I need is a 6-bolt AWD flywheel.What I want in order of...

I'm putting together a built 1G 2.4L block with a race 2G for my RWD car and I'm trying to decide between an HX-52 and an HX-40. This will be my daily driver but I may take it to the track occasionally. The motor will also have the following: A Megasquirt 3 Water/meth injection Kelford...

I'm looking at a '99 Eclipse that I found for sale and in the pic it looks boring. Others I have seen look very agressive in comparison. What am I missing?Thankx.

I'm trying to decide what turbo to get and was wondering if some of you that have this could mention:I'm trying to decide between a Holset HX-40 and an HX-52 with a twin scroll manifold.1. what exhaust manifold and turbo do you have ? 2. when does your boost start (rpm) ? 3. when do...

Does anyone have the dimensions of the 1G motor? I'm looking for something that would show the width and depth of the motor at different locations. What is the longest/widest point; how long/wide is it from the centerline to the front/rear of the intake/exhaust manifold; how much does the...

I'm considering going narrow block instead of wideblock but I need to know if any 6-bolt 2.4 be made RWD ?Thanks, David.

I need to get a NON-rebuildable HX-52. It doesn't matter how damaged the interior is I just need it to help mockup a custom exhaust manifold for my RWD 4g64 that I'm putting in my Starion.I'm looking for as cheap as possible. Any ideas where I can look?Thankx, David.

I'm putting a 4g64 into a RWD Starion and I'm trying to find an exhaust manifold that will work without having to have one custom made. So I'm looking for someone that has an HX-40 or HX-52 that they can test fit on a JM Fabrications Top Mount Exhaust Manifold or Bottom Mount Exhaust Manifold...

I have found a company that will nitride cranks but they will only do it in batches as I have to rent the entire assembly. Right now I'm only looking to see if there would be enough people interested in doing this as I would need at least 5 people at $125 each plus shipping. If I can get 10...

I'm ordering a custom manifold for my build and I need to get the correct mounting plate for a future HX40. It will be a twin scroll, top mount, similar to the JM Fabrications but set for rear-wheel drive.I absolutely will be going twin scroll. I will only go with a BEP hot side if I can...

I'm building a 4g63 head and 4g64 block to go into my Starion and I'm trying to decide what size turbo (and exhaust manifold) to get. I will be running a Magnus Street SMIM and Kelford 272 cams with adjustable cam gears for the head. The block will be a stock crank, forged rods, and probably...

Has anyone found a high volume oil pump other than the TOGA? I found a post from someone that measured a TOGA and found it had the same specs as an OEM.Why do I have to type another message after my original question?

I've got a forged 4g64 crank that I want to get nitrided but can't find anyone that does it that is reputable.So does anyone have recommendations on where I can get a crank nitrided and how much it runs?Thankx.