My parking brake light is on at all times and it's not due to a low level of brake fluid. Since my transmission was rebuilt by Aamco, the light has been stuck on. There are wires located under the brake assembly and they form down to a female end that looks like it takes a thin wire. This wire...
Is this a holset h1c because it looks different on the inducer side then on photos I've seen on the site. It doesn't look like a small or large h1c as describe in previous posts. Thanks for the help and sorry if I'm mistaken and it has been answered.
I am looking at buying a 2g GSX that needs some work. It has a bad motor and my only concern is that the transmission is bad. The seller keeps telling me it's good and I hope it is but I don't know for sure.
If I take the risk and it isn't I won't hear the end of it from my family if I loose...
what's with the name? Monkey Nutz? owww, talk about poor marketing. I am getting a crate motor soon and was thinking about going with dsmgraveyard.com but the reviews, putting it nicely, were not so good. Jack's Transmissions had good reviews and were very reasonably priced and I am currently in...
If that guy can't answer the vtech question, just ask this guy: it's got A V-TECH. From the color choice, he's been building eclipse since back in the day.Eclipse
Eclipse TurboI like how the price dropped 500 bucks in one day and how this car has been posted for awhile now as a turbocharged...
The apples to oranges post is hilarious!oh yeah, ummm GSX>WRX overall. The looks are just stunning and hold up so well for the age of the vehicle. The look is still relevant and the 4g63 block is a powerhousebut for a person that drives often a WRX would be better haha
Just what I was thinking Tfitch. Anyone that would have that happen to them would be pissed wayyyy off. In my opinion if someone said he wouldn't be mad, he is lying because the perpetrators are not laughing with but rather at
That will be really good, your injectors would be overkill and you could buy a new evo316g for the price of a new small 16g imo but thats a good setup. I would go PTE680's like me hahaOnce you get the power a front sway bar will make the suspension tighter and will help with wheel spin so that...
The idea of a bov valve is that when you shift or close the throttle body, the pressure bounces off the throttle body and escapes through the bov rather than bouncing back into the turbo compressor. When it does vent you loose intake pressure, thus loosing boost so you'll want to set it at a...
ECMTuning, Inc.Here is DSMLinks website, ECMLink.com and on the link there is a 1g non eprom to eprom conversion. Thats youre best bet to get DSMLink. Read some stuff on the site and then get the ball rolling by placing your order, sending out your ecu and very promptly they will send you back...
The black about 3 inch plastic/rubber hose that connected to the old bov to the intake snorkel (which connects to the turbo) is what recirculates (returns the bov air pressure) into the intake snorkle; without that connected, the car will vent to atmosphere which is bad for a stock car. If you...
if you have it on a flange on stock rubber intercooler piping you'll have to turn it sideways, if youre running a front mount then move the piping down from the coupler. If those two don't work, then youre screwed; a pun was intended. Someone else has to answer if you can change out the...
you would definitely need to go to their site and watch all the tutorials, read all the guides, and be gentle until you KNOW what you are doing. Things like when to and how to pull timing and and fuel maps are confusing. You could get it and improve things as you learn how to. Don't get ahead of...
http://www.dsmtuners.com/forums/151542268-post36.htmlI love what he did, it's awesome but when I looked through it I found this one. It's different from the connector on mine. Nothings ever easy
I am free in all the ways that you are not- Tyler Durden; Fight Club ;)I feel lethal, on the verge of frenzy. I think my mask of sanity is about to slip.- Patrick Bateman; American Psycho
A 95-97 solenoid is different than a 98-99 evap solenoid so if anyone that has the correct wiring information, please tell me.On the connecter boxed in white:
-What wire goes on top and bottom; Red or forest green with 2 black stripes?
This connects to the evap solenoid boxed in red...
Any ideas? I checked the wiring for a short but it is all pretty well covered so I would doubt there would be one. Its all pushed against the fire wall
Tech Guide: 2G 4G63t Upgrades: Stage 1 Power - DSMtuners
The tech guide explains it quite nicely 275-300hpFollow that and you will have a nice safe set up for the power desired with a 16g, otherwise just put a 16g on and use the stock wastegate without mbc and you should be safe with a small 16g
I replaced the purge solenoid and battery. When I start her up I still throw DTC P0443 and the check engine light is still on. Does anyone have a solution?Also according to v3 lite I have 3/4 OBD2's complete; catalyst is incomplete. Is the catalyst just the catalytic converter or would would...
Put in a new battery and did some general clean up and this wire was hanging out by itself. It comes out of the sheath that surrounds the positive battery cable and fuse box wiring. Same thickness and look as the negative terminal cable but I don't know where it goes. I'm not too familiar with...
I will hunt for a solenoid that looks like that but that is off of a 98-99 car. My EVAP canister and solenoid are in a different place being it's a 97, i.e under the battery tray. If anyone does have a picture of the exact location of the solenoid on the 95-97 cars it would be helpful to myself...
When I tried to trace the vacuum line in went into a sheath with a few other lines so Idk which vacuum line goes to which solenoid. A picture of the solenoid would make me erratic
1997 GST-
I have CEL code p0443 Evaporative Purge Control Malfunction, therefore I pulled the battery/tray and am looking off the EVAP canister for the solenoid I need to replace.
I don't know what the EVAP solenoid looks like and where it is mounted to.Thank you in advance to whomever...
Thats crazy 97GSX. I have seen people steal pictures of your car and post them on fake craigslist ads. Your car has inspired me to repaint and redo the exterior and interior to like-new status :( Hope the new guy keeps it clean
If you are just going to daily drive it then evo8 all day, beautiful, comfortable cars that are rare but if you want a vehicle to tow things, not care if its clean or not, or if you need a truck bed then get the truck.
When I bought my 3", I was afraid for inspections too so I bought the cheapest cat I could find, this one only $63 and you can find them for even a little cheaper if you look.
Amazon.com: Magnaflow 91005 Universal Catalytic Converter (Non CARB compliant): Automotive
I decided against welding it...
If you like the car though you can really buy it, but the real price isnt quiet so pretty :/Cars for Sale: 1999 Mitsubishi Eclipse GSX in FLORENCE, AL 35630: Hatchback Details - 276120743 - AutoTrader.com
Hey dsmtuers, i'm new to the forums and to building cars. This is my first 4g63 engine car but not my last. After I build this to be a fast street car and learn the ropes on modding, I plan on getting a gsx to be a dangerously fast street car and handling machine... my ferrari killer :cool: I...