Ok, this is my 4th alternator from Oreillys with in 2 months and is the only one i have received that is putting out the 13-14 volts during idle and cruise. All the others the car would have do be under decent load to provide a decent output aside front battery voltage.Only issue i am having...
How would one go about repossessing a vehicle that was sold privately.Issues are the payments of the vehicle are no longer being made, and it was clearly stated that if the payments were to fall behind 3 months, the vehicle is forfeited back to the owner on the title with a non-refundable down...
I'm currently attending school for auto technician/tuner. It's surprising how much this site has taught me as I've already known everything we cover from calculating cam specs, bearing clearances, afr, engine rebuilding... And the list goes on.I'm here asking for input for what to expect once...
1995 GSTECM v2
14b or 16g turbo
Mishimoto fmic
Intake
560cc injectors
Exhaust leak, but at the downpipe.
Fuel pump unknown
Supposedly 6 bolt swap
Non 95/96 cas option used via LinkI bought the car not running but so far i have gotten it to idle by fixing the wiring for the O2 sensor ( i got...
I've been fixing so many wire issues with this car and the MAF is my final issue to trace from this slaughtered harness.
On the Maf Pig tail there is 2 "Blue/yellow" wires. Which one of them goes to the ecu on Pin #90.I've uploaded a photo labeling the two wires as wire 1 and wire 2. Thanks in...
My o2 sensor is not giving any type of feed back to the ecu as I log during Dsmlink v2.
Reads .02I got a new sensor, and same issue.
Does anyone know how i can wire the upstream o2 sensor directly to the ECU?
The harness in this car is a mess and would be much easier to do so.Wire color...
I just bought this car 2 days ago and its misfiring like a mofo.1995 TSi
ECMlink v2
6 Bolt block (haven't verified)
2g Head Wtih Black CASI need help figuring out where to route this wire i found cut off.
Thanks in advance.
My car is running extremely rich with horrible gas mileage. T25 is in good condition.I did a wot pull and it peaked to only 15psi with no boost source connected to the wastegate.So i did a boost leak test up to 20psi with no leaks with the wastegate unhooked, then did a second test with...
I understand these cars are heavy but im asking this as a process of elimination.My car feels extremely slow at cruising speeds, its feels like i'm pulling a car behind me.My question is when in Drive, upon releasing the brake should the car start to creep forward? Mine doesn't and am...
Drunk as #### right now.Remembering my friend Adrian Nevaro.Stopped by the block where we all lived, Drunk and left with someone who picked him up.Next day found out the car he was in crashed into a wall killing both who people where in the car. (only 18yrs old)...
Planing on taking out the 18g turbo as i took out the neo and evo injectors to sell to fund for link and there is just no point to have the extra lag to be hitting stock boost.Replacement turbo t25 which has some shaft play which im a bit concerned about. I know a little is acceptable as...
Alright for those who want to help and not talk about how dsmlink is way better, which i already know. Its just i could of bought it but im not planning on such great numbers.Mods are:Intake, MHI 18g Turbo, Full 3 inch exhaust, Boost gauge, AEM Uego Wideband, VRSF Front mount...
Im trying to balance out my air fuel ratio on the AEM Uego.Ill Dump more fuel in on the safc and get the air fuel ratio to 14.5 at idle.But after adjusting it, my wideband slowly creeps back up to where it was to begin with.Any ideas? Am i suppose to go to initialize and click yes?
my t 25 was blown and I had a parts car gsx so I pulled the turbo 18g and installed it.
Fixed all the leaks today.
Still laggy...
Pulled the wastegate line off still laggy...
No exhaust leaks I should be worried about...But I have noticed the the bolt holding the head of the wastegate...
Okay for the longest time i had this problem with losing fuel pressure.
I got sick of it finally and Pulled my fuel pump and replaced the O-Ring and problem solved. No more excessive cranking on start ups.Since then i took a drive with about 1/4th of a gas tank and noticed a smell of gas...
This clip connects on right side of the intake manifold when your facing it next to the brake resov.Its a one pin wire and the wire that connects to it, is on the harness that's holding the wires for the cam sensor (its a 1995) along with the ac harness.Its a black and white wire...
Okay so i bought a 92 5 speed Transfer Case as a back up.
23 Spline.My car is an auto and have been reading some threads on compatibility and read some mixed answers.Some people said the gear ratios were the same along with Vfaq.
Some said only the auto transfercase will work on a 5...
I don't know if or why one of these pricks deleted my thread but i cant seem to find it but here it is again.The first link has the complete footage with the crash but you do need a account on youtube.private crash - YouTubeIncase you don't have an account heres a second link cut...
Ok so i tested my IAC and found a dead coil, pins 5 and 6.
Swapped it with a good one and while i was at it i checked my TPS.closed it read 1.5 or so and open was around 5.7 or soso i adjusted it at closed throttle to .63 and oped it read 5.7 or so.I went for a cruise and now while...
Okay i know i should'nt have been doing car part outs since i live in some House/apartments, we're not buying the house just renting.Parted out a trans am.. got away with it.
then i parted out a awd 2g dsm but this time when my friend and i were pulling the motor and tranny as everything else...
Cars a 95 Awd auto..Ok, so one day my car just decided to spill all the oil thru the oil filter housing gasket and left me with a seized motor on the free way.Got a pal to pull me and when it pulled me he yanked my car pretty hard enough to pinch the wires on the fuse box to short out...
okay i got a new motor in with and its leaking from the yellow marked on the photo below..when i pulled my old one out it had an o ring, and i tried rtv'ing the new one but it still leaks.where do i find the gasket?
Picked up this high rise spoiler for 17dollars on craigs.Ive read posts on fiberglass repair but all the instructions go as putting the fiberglass sheet from the inside.On this certain occation am i suppose to use something else or just put the fiberglass sheet over along with the resin...
This is me before i left that car for my DSM.
I couldnt take sneaking around so i made a full commitment to my Talon and abandoned the red piece of shit :phaha jk THAT IS NOT ME..but thought id share that video.My Strange Addiction S03E01 - YouTube
Can some one use microsoft paint and color in the part that i am suppose to RTV.My transfer case locked and have a used one coming in tomorrow and would like to make sure this one doesnt leak.same for the drive shaft.
Alright, I'm posting this question for a friend..The Fuse keeps blowing for the left side of the lamp.
The brake light works, but other than that driving at night you only see the right side on.The gauge cluster light is off as well..All the wires to the bulbs seem to check out fine...
just as the title says..
Its seems to be coming from the front right engine..I was thinking a bad wheel bearing.
Cv axel looks good.Later I had a mechanic take a look at my car and he said it was my transmission.
He said he had jacked up my car and all tires were spinning except the...
I dont know if this has been done, But i thought it be cool to have a thread where people post their Favorite song as of now.I was in a process of making a CD and thought a thread like this would be useful.Mine as of right now is..Mr. Rager By Kid Cudi..
i just did a boost leak test and had crankcase pressure. I had already done so and suspected the pcv valve. A pal on tuners gave me a bypass valve to put between the pcv and intake hose so air would only flow into the intake manifold.Doing another boostleak test after the install i still had...
Ok i had replace my fuel pump while waiting for my alternator to be rebuilt! Next day i got the alternator and after installing it started right up! Everything was good. Two days later i started hearing a really low humming noise from the engine bay. Another day later i go to start my car and it...
Is this fuel pump campatible with my 1995 tsi? it says it is on ebay but it also says its compatible with the GS model so i am wondering if theres any difference?OEM Replacement Electric Fuel Pump w/ Install Kit (#18) | eBay
i took off the charcoal canister and wanted to know if number 1 in the pic is the one that gets tucked down. and number 2 was already there unplugged so i dont know if it belongs to the canister. Thanks
ok only the circled pin in yellow is giving off a positive charge. is that normal? should the rest do the same? please help. the plug is for the alternator.
Someone please help me get my car running before sundown. the cars alternator is good but it passes no charge at all to the battery! Anyone please help with the possible flaws causing it to fail. fuses, relays, wiring. where each fuse is located please. Thank you so much.
I replaced my alternator after having it rebuilt yesterday and when i went to start up the lights would dim upon revving and accelerating. but after warm up all the electrical components maintained a steady charge. Looking at the alternator just now i noticed this yellow cable unhooked and need...
Ok i want to remove most of my emission in my car just to lose the cluttered engine look. So im assuming my car will throw a code and my question is will having the code on make my car run bad or the CEL is just working as a notification that they are missing? thanks
I was just driving home from work and my car gave off a oil burning smell. The car wouldnt shift when its suppose to and my brakes had gotten stiff. After coming to a stop light the car began to shift regularly. The problem would come and go. Any help would be appreciated. car is all stock and...
So today i turn 21 :D and i am quite anxious for sundown. Celebrated early last night with some king cobras :p
The drinking scene to me isnt new. Friends are alcoholics so i drink quite consistant (^_^) But im soo down to hit up some bars and take me home a cougar. or go home with the cougar...
i got a maf CEL code today. and wanted to start by checking the harness on the maf. ive noticed the connection has 8 wires but only 7 pins on the plug. Is that how they are?
ok my cars CTS was bad. and Recently one afternoon after letting the car sit it didnt want to start. so i replaced the sensor n still no start. Car cranks but no start. So i went down the list, Checked for spark and there was. Now i was checking for fuel. When i unplugged the fuel rail gas...
I've notice my bov is leaking into the recirculating tube under light throttle. The boost gauge easily goes up and hear air slipping out of the bov but regardless I feel no power at all. Does anyone know if it's caused by the bov that the boost gauge reads high And can't feel the boost pull? Yes...
Ok, my car is a 1995 automatic Talon tsi awd. Every time when my car is started with the engine cooled off i have power issues. for example as the car is idling in park, and by giving it a tap of gas the engine starts to stall but restores after letting go. Also when accelerating the car feels...
Ok when i first got the car i drove it home about 70 miles and did good on gas. when changing the sparkplugs and wires i set it to 4.1.2.3. and started getting very bad gas milage. about 12 miles per gallon. Right now i have it set to 1.4.2.3, but i notice a decrease in power but milage is good...
My car runs a bit rough and i noticed this ticking/clicking coming from the part in the picture i uploaded. Its Mounted onto the Firewall with a bronze looking bracket(The sensor or something on the right side of the pic with the 2 vac lines). Can anyone please let me know what it is and what it...