On my 3.0 V6 I am making it so each header has its out exhaust pipe and outlet, a true dual exhaust. So there will be no x,h,y, pipe, no cross over, just 2 pipes. My truck as 2 o2 sensors, 1after and 1 before the cat. I was going to remove the cat but won't it throw a cell with the second o2...
Any idea?
YouTube - VIDEO0006Gauge is hooked up properly I can feel it build boost, hear it blow off but it won't og into the boost section, just stay in vacuum
Top of my gas tank has rot, all the bolts holding it on are rusted and flaking, the bottom of the tank is not too far behind. I just want to get a cell instead of trying to fix it because I honestly don't know how long it would last after fixing and dont want to deal with it again. Who is...
I get asked through out the day what these colors are for by many people, some on here some not so I figured I'd just post for everyone.PIONEER (models before 1999)P o w e rMemory (+12v Constant) - Orange
Ignition (+12v Switched) - Red
Ground (-) - Black...
OK so aside from the DSM world I am now consumed in, I used to be a quite a mud man. Here she is 1994 Toyota Pickup. V6, 5 Speed, 4x4. Custom made dump bed. 3" Body lift with little 33's. This is what got me into wrenching. Bought it when I was 14 for $200. Since then I replaced most of the...
Gonna have to start handing these out at my local Walmart!http://www.youparklikeanasshole.com/files/notice_1.pdfhttp://www.youparklikeanasshole.com/files/notice_2.pdfSite : give a notice - youparklikeanasshole.com
I have already pulled the motor out of my shell and unscrewed the cable from the tranny. How do I completely remove it from the car so I can give it to another member?
Browsing around looking for some pieces and saw this. Made me laugh. Anyone think it would work or actually tried it haha?EAGLE TALON 1990-1998 PERFORMANCE SPEED CHIP FUEL SAVER - eBay (item 120673864567 end time Jan-22-11 10:50:05 PST)
Anyone know what pitch and thread the banjo fitting is on the turbo? I already have a bunch of SS line laying around so I just need the fittings and don't want to buy a kit
This is a pic from another members car (volkerding95GSX) does anyone think this would fit in a 1g w/o modification?95-99 ECLIPSE REAR UPPER X-BRACE TOWER STRUT BAR 2G DSM - eBay (item 140339702175 end time Feb-04-11 18:26:18 PST)
OK, so I have finally got my motor in my new shell but still need help finishing it. When pulling the motor I kinda beat up the charcoal canister so I just decided I won't reinstall it. Now I have a Cyclone manifold. From every "Emissions Delete" I have read it shows having 4 hard pipes...
Took this out of my white car. 1Ga TSi 5 speed blah blah blah. Well its only got these weird markings on it and I have no idea what it is. I don;;t see an EPROM chip but there is a weird chip on the side any ideas?
1g TSi. I know 1 fan is triggered when the motor reaches a certain temp and the other for the A/C and Some kind of Block or thermo thing on the A/C fan.
I have removed my A/C since swapping the motor. I wanted to know if I could run the fans in series? I want them to both turn on at the...
Hey everyone in the NY, NJ and Pa area! I work at Bear Mountain State Park. During the summer time we have a BIG, over 100 car, car show. Not once have I seen a Talon/Laser/Eclipse. We mostly have beautiful muscle cars a few exotics and some crappy hondas who think they are the sh*t. I think...
Lets start with in the very beginning. What made me even get another vehicle was my truck. Since 14 I have had a Toyota Pickup and love it. The V6 motor is notorious for blowing head gaskets due to the poorly designed factory exhaust. So I finally saved enough money to have the motor bored...
I went and picked it up lastnight. Pretty nice shell. Driver side front fender has a dent but was supplied with a new one. Almost all of the interior is there just missing headliner and a pillar covers. Well here are some pics:What is this?What does...
Ok I'm gonna get a Holset H1e. Has anyone installed this on a Talon? I was either thinking of using the Holset hotside but I wouldn't know where to get the o2 housing and I have to buy a T4 flanged manifold. Now if I buy the BEP Turbine Housing, I can use the stock manifold and my o2 dump...
As of right now I just have a true 3" turbo back Magnaflow exhaust with a Highflow cat. I plan on installing an atmospheric o2 dump (just pointed straight down), and a 3" electronic cut-out that would come out of the front bumper. My first question is where would I put the bung for the Uego...
I have a lot of this... A couple of feet actually like 20ft.... Would you be able to use this as exhaust pipe? Or even IC pipe? I have sizes 2" 2.25" and 2.5"
OK I have a 1990 1g TSi. I've been looking around trying to upgrade to a 16g. I finally found a MHI B16g with a ported 2g tubular manifold. Now I also have a true 3" turbo back exhaust currently installed on my car. I know a 2g manifold will fit on a 1g, I think but will I have to do anything...
Ok, I have searched and found some things but am not getting what I want. I would like to put SS oil lines on my 14b. First question, I plan on switching to a Big 16g, will the fittings from the 14b work with the 16g? Second what are the line sizes for the oil lines and the fitting sizes? I...
Ok, I know I have at least one problem with the car and that is the factory MAF is no good. I have a 3" GM MAF but can't put it on until I get a wideband. Now, does the CEL double as a factory shift light and should I listen to it? When I am in gear and get to about 4000 RPM the CEL comes on...
OK well I saw on VFAQ that there is supposed to be a wire with a plug inside the car on the passenger side. They say it is for 1Gs and the picture was takin from a 91 GST. I have a 90 Talon TSI. Yes. I know AFR gauges are stupid and useless blah blah blah please save the bashing for someone...
My MAF was going so I just wen and ordered a GM 3" MAF and the MAFT from OnGreenPreformance.com So I got it all installed correctly and the car did start. Note I have not tuned or dialed it in yet. Now for the problems.... When I start the car it sounds like a Scoobaru with an exhaust on it...
A friend of mine has one laying around and said I could have it for $20. Good deal? Also does anyone know the pin out or where I can get a wiring diagram for the pins or just a harness?
ok just finished welding my gas tank. After that was done I emptied out all of the water, unless there was some I could not reach which I doubt. The car also had a HKS SSQV on it, non-recirculated. It was sputtering some, build about 2 psi at the most. So I put a stock 1G BOV on it...
OK, so I have finished fixing my hanger and sending unit last night. Got it all put back together and now every time I try to start the car a fuse pops. I'm not exactly sure what the fuse is for, I think maybe fuel pump. It's the fuse directly attached to the battery. It's the 30 all the...
I have been looking nonstop for the past week for one! I can't find one ANYWHERE. I need the sending unit and the hanger. No pump. Looking for a new or good condition used. Thanks
Ok so I just bought a 1990 Eagle Talon Tsi yesterday night. It's basically stock with a few upgrades and a few screw ups. It has a rebuilt tranny with 500 miles on it and a recent head gasket job. For upgrades it has an aftermarket boost gauge but I don't know if it works along with an...