So, I recently had some complications with my hx35. Currently I need to decide if I should continue with my current turbo, rebuild it, and reuse it. Or buy another one. Upon removing the turbo, due to excesive in and out shaft play, I found that the compressor wheel has been contacting the...

The other day while driving to work, the engine suddenly cut off. I coasted to a stop and tried starting it again. But didn't here the fuel pump. It also isn't building any fuel pressure.After getting the car home I swapped in a Walbro 450, took the 255 out and put in a new fuel filter...

I broke the 400whp barrier this year with a whopping 406whp and 365tq on a Mustang Dyno. I'm very happy with the car!Main mods consist of:Stock block 8 blade Hx35 w/bolt on housing @ 30psi on E85 tuned at SIM in Michigan.Here's the power pull after a long day of tuning.DSM...

I recently got all my boost leaks taken care of so I've been trying to get all my idle tuning set. (This is on Dsmlink V3 and car is on stock injector right now)So yesterday is when I started messing with it. I got all the values to the desired points i.e. airflowperev~.25, CombinedFT~0%...

Hey, I just moved up here for school from chicago and I'm looking for some fellow dsmers in the area and some meets to go to. I've been finding stuff from the area but it's all really old stuff. Do meets still happen at Dashworks on fridays? HIT ME UP!

The car starts up perfectly then the motor loses power. Sometimes it's 2 senconds after starting sometimes it's closer to 10 seconds. It seems to have progressively got worse. The first time I noticed it was while driving the motor would just stall. Did that about 4 times then it hasn't been...

I bought a 92 tsi awd a couple months back, it sat for about a year before I bought it, and it's always had this problem since I bought it, thought it may be the trans but thinking it might not be, hopefully. At the shifter in the car every once and a while the actual shifter assembly will...

I found a great deal on some D2 coilovers and the guy was using them on a AWD 2g, but I have FWD 2g. My question is will they fit on my car? Looking at D2's website it shows 95-99 have the same part number, unlike the 1g's where they separate AWD and FWD.D2 Racing NA - Products - RS...

After installing a set of Delta HKS 272/272 regrind cams I noticed white smoking coming out of the exhaust. It doesn't smell like coolant or oil, just exhaust. I used the provided shims I received with the cams when I installed them. The drivability is still good just as good if not better than...

Are there any plans for a cruise down to MOD on Saturday?

I have DSMLink v2 for my 2g but I would really like v3 instead. I would want to trade my whole v2 package for a v3 package. Let me know what you guys got, I'd throw some cash in on the side aswell. :D

I recently installed a Halman Pro boost controller that I know works and all supporting mods to run over stock boost.Now for the problem, I can only build up 15psi then it creeps up a little higher. I've always known it creeps but I'm not worried about that at the moment. Where ever I set...

I recently bought PTE 1000cc injectors but I haven't got them to seat correctly on the head causing it to leak. Only the port closest to the head is leaking no matter what injector is in it.This is the stock 2g oring on the PTE injector and it doesn't look right, I have not tried to run it...

I bought a used set of PTE 1000cc injectors. I recently found out that they have been leaking at the head. I have them in the car right now so I cannot take a picture of them but here's a link to what they look like, just PTE instead of RC.DSM Classifieds - Download:In the listing the...

I'm having trouble with my PTE 1000cc injectors I just received. I have good orings and all the injectors seal perfectly except for the one closest to the timing belt. I've switched around the injectors and still only that port leaks. I've also tired installing the fuel rail multiple times and...

As the title says I can't get my fuel pressure under 50 psi. I just installed a Walbro 255 fuel pump and a SX racing afpr. I turned on the pump via DSMLink to adjust the pressure and the lowest I could get was 50psi. What's up, is the afpr bad?

I went to install my Walbro 255 and noticed that it's missing a piece that my new 190 had that I just sold. On the 190 there was a large silver piece on top so that the white cap could fit on it snugg. The 255 didn't have that, the white piece kind of flopped around and just fell off. Is it ok...

There's going to be a car show at South Elgin High School this weekend on Sat. the 21st. Lets try and get some DSMs there!! :hellyeah:

Hey, I'm trying to sell some Dejon UICPs for a 2g.Let me know if you're interested.

I've always had a problem with my trunk shocks holding up the stock high rise spoiler. I bought some different ones off a 2ga (with low spoiler) that held his up fine. Put them on my car and they didn't hold.Anyone else have this problem?

I bought a used ACT 2600 with a street disc. The disc had hardly any wear and same with the Pressure plate. Well I tried cleaning the PP off with a rag but there is a little grime and such that wouldn't come off. Is it ok to use a scotch bright or something similar to clean it off? Or is it fine?

I'm not sure if I blew the turbo or not but here's the story. Last night I was coming home from work and I heard a clanking noise for about 2 seconds, kind of sounded like chains, this is at 10 mph in 1st gear. When I get closer to home I hear that same noise again, 40 mph 4th gear.On the way...

As the title says my car has been running great but I decided to check compression just to be sure. Sure enough did a compression test at operating temp with an Autozone test and here are my result. 1st-4th 62-82-85-100. Not very good. Put oil in and got 140 across the board. What should I do...

I'm looking for options to recirculate my tial 2 bolt 38mm wastegate. I wanted to run it off the o2 but I've read the the Punishment Racing o2 housing for the 2 bolt won't clear the fans. The threads I've read about it are from 2009, anyone know if they modified the housing to fit with the fan...

Anyone that goes to Tinley Park in track? I'm heading out there tomorrow for a meet. Just wondering.

I need a tensioner arm for a 7-bolt. My dad decided to snap it in half.Call me 630-725-8248Found one :D

I got this bov when I got the car, I'm no longer running it anymore. I'm not sure what it is though. It looks like a combo of a 1g and 2g. Is it some sort of evo bov? Thanks for any help

The first time i started to hear this was a while ago when I first got it, so maybe a year. Well when I shut my car off I hear a deep clunking noise. That's the only time I use to hear it.Now today I figured I do a 2nd gear pull on the way home, around 5k rpms I heard that same deep...

I just picked up a holset hx35 and was looking to run with a bep .55 housing instead of t3. I also wanted to run external gate of the o2 recirculated because I found out I don't really like to dump. Anyway I found this on Ebay and I was wondering how you would bolt this up to the downpipe. Some...

During the last weak or 2 I've noticed that my steering shakes in 4th gear. The speed isn't really a factor it's more of the rpms and how much throttle I'm giving it makes it shake more violently. Never noticed it actually shaking the whole car. Should I get the front end aligned or tires balanced?

Today I went to locally pick up some injectors. I got there everything looked fine, paid him and left, I don't know much about injectors. I was excited because I got myself some FIC 950cc injectors:D. I got home and checked the ID numbers just to be sure,sure enough the ID came up as RC...

My car is driving me crazy!!I just put in a new front o2 sensor which helped out a lot but my car is still crazy.As you can see in the log I have multiple accounts of 12 deg of knock. What is causing all of this. My mods list is up to date. I need help!!In the log it's an excessively...

Last night I went for a little cruise and while accelerating in 4th gear it sounded like something popped off, it was right by my house so I got home opened the hood and it was idling really bad. It would drop down to 500rpms or so, wideband would read --- and DSMlink read 20.0 afr. Then it...

I have a quick question, should I adjust my timing if I have a boost leak. I've had multiple accounts of 12.7 deg knock. Should I tune to get rid of if? I have an idle of about 10 inHG at an idle of 1200rpms or so. The only leaks I could find was a leak on the throttle body which I'll replace...

I can't get my car to start, thought it was the cold but put it in the garage with heater and nothing. Just put in DSMLink and it started before with it but now it won't. NEED SOME HELP!!YouTube - 0211010723.3g2

I just fixed some major boost leaks including my intercooler couplers and TB gasket and now it's running lean. Before with the leaks idle was anywhere from 12 to 14, same with at cruise, WOT was 10.5ish. During the same time my vac was about 5 inHG at 1000rpm. After fixing the leaks my new idle...

I just got DSMLink and I want to put it in but i can't get the cable to connect to my laptop. I know my DB9 cable works same with the OBD II adapter but it doesn't connect to my laptop. It doesn't pop up in the device manager. I don't have a CD because I bought it from a 3rd party. Is there any...

What's the next size up from the e3 16g that is not Mitsubishi? Just want to know for sure because I don't want to get anything to HUGE just a bit bigger, something that would make 400hp easily with supporting mods. I know this has probably been asked a million times but just deal with me.

I just got a stage mod kit from Dejon. I installed the Intake pipe one day and it was fine. Today I just installed the UICP and the S-pipe. After installing those two things it made my car run off the scale lean and the exhaust was popping. Then after a minute or two it then richened up to about...

Yes I did you the search button, I use it everyday but I couldn't find the answer I was looking for so I decided to make a thread to get the answer straight forward.I know I can use the openport 2.0 cable to use EvoScan and ECUflash/Ceddymods, but I was wondering if the 1.3U 16pin cord would...

Ok, so I just installed my PR dump tube and I have a little problem....I think. I can hear it the whole time I am driving. The only time I can't is if I let off the gas in gear. I don't know if this is normal or not.When I was putting on the dump I also noticed the flapper in my Evo III 16g...

How's it going guys, got my 98 GST about 6 months ago and been on the computer ever since. :D Mines just a DD but I still have some plans for it.Here are some photos of my 2g. Enjoy!

I need to know whether I should get a wideband or just stick with the EGT i have. I never installed my EGT so that's why I want to find out sooner rather than later.i know they pretty much do the same thing, but should I spend the extra $70 to get a wideband or just use my EGT.I was planning...

Something weird just started happening with my car. When I idle without my lights on its steady around 1000rpms, but when I put my headlights on it drops a bit to the point where it almost dies. I don't no what's going on...please help.