Hey everyone. I’ve been having a problem for awhile now. So I swapped my motor after it being down for a year with no motor in the bay.Before when I lost compression, the car started on a dime and now it doesn’t make any noise besides the pump kicking on when I turn the key. No starter noise...
I have for sale a 2G AWD MEGAN catback exhaust for sale. Only reason I took it off was because I went side exit. Looking for 100 OBO. I will not ship from 16441
I need some help guys! A few days ago, my car was boosting just fine. Hitting full boost on my 20g around 3500. I was having an issue where I'd break up and missfire if I went above 22 psi. So I did a BLT and realized my BOV would leak around that PSI very badly. So I adjusted it to hold the PSI...
Ok guys. I did an engine rebuild and put everything back in. Now my obd2 port won't connect to link and is only showing 7-8 volts in pin 16. I know it should be an unrestricted 12v circuit. Any one have any ideas? I'm lost and the cars been ready to start for weeks but I can't connect.
So I've been looking around because I will probably have to replace my clutch sometime this year and I came accross this site. Not sure if this place is a good place to order but I emailed them because nothing will go into my cart. I found this and a 2100 PP for $159 shipped. Just need a new OEM...
So I've completed my first autocross season and all in all I can in 4th place in SM in my region. 2nd 3rd and 4th place were all separated by not even .25 points in raw points and pax which means there's some pretty good competition. Being a rookie I thought I did pretty good but I want to step...
Place: 940 W Bayfront Pkwy Erie‎ Pennsylvania‎ 16507
Date: June 7th
Time: 2pmCome and get together with a bunch of DSMers from the trip-state area to talk cars and grill some food. After that we can take a cruise around the peninsula if people are interested. It's a great place...
Place: 940 W Bayfront Pkwy Erie‎ Pennsylvania‎ 16507
Date: June 7th
Time: 2pmCome and get together with a bunch of DSMers from the trip-state area to talk cars and grill some food. After that we can take a cruise around the peninsula if people are interested. It's a great place...
4th annual Erie Pa DSM meetPlace: 940 W Bayfront Pkwy Erie‎ Pennsylvania‎ 16507
Date: June 7th
Time: 2pmCome and get together with a bunch of DSMers from the trip-state area to talk cars and grill some food. After that we can take a cruise around the peninsula if people are...
I'm talking to a guy about a set of used 264/272 HKS cams and was wondering if you guys could help me out. He said they were used for 10k and to me they look good but I'm no camshaft expert.
So I was talking to my father the other day and he told me that he thinks that he worked with the guy that bought my first car off of me. So I asked him if he ever sees him again if he would ask him about it and let me know.I've always loved eclipses since I was in the 6th grade and new I was...
So I competed my first autocross event yesterday. I've rode with my buddy Aaron quite a few times before and I knew that this is what I wanted to do. So after so many problems this year with the car she was finally able to get out on the track and let me say THAT IT WAS A BLAST! The goal for the...
First off i just want to say that i know that these are all season/performance tires and will not handle well compaird to a tire like a star spec. I'm just wondering if anyone had personal experience with kumho ecsta ast tires. I have them and am not pleased. Are you pleased or not? What psi...
Just wondering if anyone was interested in jumping on the highway and meeting up with us while me and a few guys drive through Ohio. Anyone from Erie to Norwalk is more then welcome if they want to get a big group going. Leaving Erie around 9 so we will be driving through Cleveland around 10:30...
All started when my transmission started to act up again over two months ago. Grinding gears and popping out of gear. So I took it to a place in Erie (ANGELOS TRANSMISSIONS) to have them pull it so I could have Shep build it for me. I did this because I really don't have the tools and space to...
So I'm looking to pick up a set of evo 8 wheels for autocross and I'm wondering if anyone can help me photoshop different colors on these rims. Looking for white mostly but any color you think looks good is welcome
I was just wondering if anyone watched it and what your thoughts are? Personally the cars are cool but the show seems rigged to me. They are not street cars. Anyone can take a drag car and say it's the fastest street car then trailer it home. The only one that drives on the road is farm truck...
Just wondering if anyone would be interested to meet up before the Dsm shootout if you'll be driving by Erie on I90. Just looking to see if anyone's interested and then go from there.
I'm having a problem with gears grinding. When I start the car up and put it into first it will pop out. IF I put it in third and let the clutch grad a little then back to first it works good. Then about 50% of the time when I shift from 1st to 2nd it doesnt grab and kicks out. When I get in 2nd...
THIS MEET IS IN PENNSYLVANIA! The meet is at Lawrence Pier Erie‎ Pennsylvania‎ 16507 at 2PM. Hoping for a big turnout cause there's plenty of room.http://www.dsmtuners.com/forums/pittsburgh-area-dsm-forum/459245-3rd-annual-ny-pa-oh-spring-dsm-meet.html
The meet is at Lawrence Pier Erie‎ Pennsylvania‎ 16507 at 2PM. Hoping for a big turnout cause there's plenty of room.http://www.dsmtuners.com/forums/pittsburgh-area-dsm-forum/459245-3rd-annual-ny-pa-oh-spring-dsm-meet.html
A friend of mine and I are planning another meet this year. Its on May 4th at 2pm. Address is Lawrence Pier Erie‎ Pennsylvania‎ 16507. You can either post here or in the link below. Hope to see you there...
A friend of mine and I are planning another meet this year. Its on May 4th at 2pm. Address is Lawrence Pier Erie‎ Pennsylvania‎ 16507. You can either post here or in the link below. Hope to see you there...
I don't know why I never made a build thread but I guess it's never to late to start one. I've had my 1999 Mitsubishi Eclipse GSX since 2008. Took me 3 years to find her and I also worked two jobs to pay for her. Had 95,000 on her when I bought her and was mostly stock beside some crappy...
Anybody get anything cool for Christmas? I got the energy bushings kit, exhaust gaskets and a really nice blt. I got other things but the rest was clothes
Sorry if there's a thread like this Cause I searched but I thought it would be fun to hear what people say Dsm stands for good or bad. I'll startDoesn't
Start
Moving
I was just wondering if anyone's useing innovative's dual function boost gauge and oil pressure gauge. I have there wideband and my other gauges are glow shift but I would like them to match. If anyones has exsperiance with these other gauges let me know. :thumb:
I'm so freaking pumped for this game. I've always wanted a forza style racing game set in an opean world setting. I'm just sitting here waiting for them to announce either the 95 eclipse (wish it was the 99) or the 98 talon. I always watch forza movies on YouTube that's made by like HRC and...
I know that its far away but just thought i would spread the word. There's gonna be a Dsm meet on October 6th at 1. It's at#726 W Bayfront Pkwy Erie‎ Pennsylvania‎ 16507.
I know that its far away but just thought i would spread the word. There's gonna be a Dsm meet on October 6th at 1. It's at#726 W Bayfront Pkwy Erie‎ Pennsylvania‎ 16507.
I know that its far away but just thought i would spread the word. There's gonna be a Dsm meet on October 6th at 1. It's at#726 W Bayfront Pkwy Erie‎ Pennsylvania‎ 16507.
It about that time for me to start planning another meet for spring time. Last years meet was fun but I'm hoping to have alot more show up! Meet will be on may 19th at 3pm at 9333 Tate Rd., Erie, PA, 16509. If anyone has any questions let me no. Probly have a cook out or just have little ceasers...
It about that time for me to start planning another meet for spring time. Last years meet was fun but I'm hoping to have alot more show up! Meet will be on may 19th at 3pm at 9333 Tate Rd., Erie, PA, 16509. If anyone has any questions let me no. Probly have a cook out or just have little ceasers...
It about that time for me to start planning another meet for spring time. Last years meet was fun but I'm hoping to have alot more show up! Meet will be on may 19th at 3pm at 9333 Tate Rd., Erie, PA, 16509. If anyone has any questions let me no. Probly have a cook out or just have little ceasers...
So I know a guy that's selling his master power 61-1 t3 turbo with tubular manifold for 300... I haven't seen to much on master power turbos so i was wondering if i should pass it up or take it running... It was in a car that had around 600 hp and they guy said all he had done was a built race...
Just thought I'd see what kinda response I'd get but there's a car show in erie pa called cruise town Erie where the shut state street down and line cars up and down the street! Just wondering if anyone was interested! I posted this cause it's pretty much all muscle with a few tuners here and...
Ok... So I'm about to pick up these evo 8 calipers for $350 and they don't have the pins or clips to keep the pads in... I was wondering if there was anyplace that sells them separate? I herd jnztuning does but I cant find them on there web site.AMS EVO VII/VIII/IX Wilwood EVO Lightweight...
So I was driving my 99 eclipse gsx today and floored it and about 5 or 6k and it stuttered and backfired... the car has 130000 miles, its got a brand new intake and exhaust from the down pipe back. The only thing I can think of is the fuel pumps going bad. Please help!
It took awile for them to get back to me but its finally official! First annual Erie dsm/mitsubishi meet! May 7th. 12 untill whenever.Just let me know if your planning on coming or not that way we can figure out how much food and drinks to bring!Greene Township at 9333 Tate Rd Erie, PA 16509