Anyone buy these and care to share their feedback or general information?https://www.ebay.com/itm/Real-100-Carbon-Fiber-2G-Eclipse-Talon-Mitsubishi-Door-Handle-Cover-Interior-/324437879883?_trksid=p2349624.m46890.l49292
Some extra parts came with the evo3 intake manifold.
Please see attached.My findings show the OEM Mitsubishi part as a igniter module for a kawasaki.
Does this part perform a function on the evo3?What is the HKS part number?Thank you for your time.
In the process of relocating a few components.Based on the circuit diagram, I’m understanding that the PTU and noise capacitor need a chassis ground.I’m wondering if I could get away with not grounding the PTU?The noise cap will be ground to the lower left stud on the abs bracket.
I'm currently looking for the trim but if anyone is in the area I found a talon with the rear quarter trim.https://www.carsforsale.com/vehicle/details/24804657
Decided to buy a BMW today, picked up a 04' 325i, since both the talon and eclipse are down for the dash swap i didn't feel like riding my motorcycle everyday. Plus I wanna take my time so i needed a new DD
Hello all, I'm in the process of swapping a dash from a auto 99' gs into a manual 97' TSI. So I just pulled the dash out of the 99' and I'm wondering if the harness attached to it from the pictures are universal throughout models? Or do I have to swap it with the 97' harness? Thanks.
I'm wondering if anyone knows where to find dust shields for an evo brembo swap? I read 4 threads and came up with these part numbers: MR569183 & MR569184 EVO Brake Shields and that the rears will need some fab'd ones. Although when I do a search it appears they're discontinued. Any help would...
Hello not to sure where to post this since i don't wanna make a build thread for this car since its going to be a parts car, but i figured i share this anyways!So today i picked up a 99 gs anniversary edition for $450!! With all black interior other than the door trims being painted silver...
Decided to add some fog lights to my car, after test fitting there was no way i could retain the stock foglight for a talon 2gb. I decide to go with my old eclipse fog lights instead. Well as i was testing the eclipse lights only one of them worked. SO i had to fight against the rusty bolts to...
So a little history, all referring to passenger front tire, axle, lower control arm (lca) etc. last month I was driving and the lca ball joint snapped off and took the axle with it. So I replaced the axle and lca completely and everything was sound. Well last week I changed the tires and rims...
So my passenger axle is a autozone one and the axle hits the center cap and protrudes out slightly, can I fix this with a rim spacer?The first pick is what I'm talking about, the second is for comparison.
So I just washed the car the other day and I noticed what appears to be oil or brake fluid all over the passenger wheel after I drove the car a few hours last night, any thoughts on what this could be? I could only post 1/2 the pic due to file size
So about 3 weeks ago I finally put a new battery in and car started up, drove it to shell put some injector cleaner in and filled her up, then drove home. Car didn't start next morning. Ordered Oem coil and transistor, 10mm wires and new bpr8es plugs. Installed it all last night and car still...
So the car will not start but cranks over with a weird grinding noise has a new optima battery and fuel pressure is at 46psi when primed, didn't know where to start diagnosing so i started with the spark plugs, pulled my spark plugs and all look good but was researching a bit and don't know if i...
So I was working on the car today to tighten up the turbo water in and out bc i had a coolant leak, I took my air filter off and noticed a small hole in it. Pictures below, is this a problem? Also i emptied out my oil catch can and it didn't look like oil in the cup, also its smelled very potent...
Just replaced my old brown IAC with a new black one and the car is still idleing inconsistently, any ideas? I was thinking adjusting the biss screw a bit bc the car idles from 1000-1100
So both of my rear brake line have rusted through, so i had cut out the rusted part of the brake lines and are in the process of putting on compression fittings to repair the broken lines. My problem is after i used the pipe cutter to get my clean cut, the 3/16" compression fitting is too small...
Just as the title reads, can anyone tell me what the cc of these injectors are? I'm thinking 650 but not sure. Also what brand is this, is it an off brand?
Just as the title says, I'm located on Ft. Stewart 4 hours S of Atlanta, GA and I need a engine rebuild and tune on a 2g 7bolt. Does anyone know of any good shops? I was thinking about taking it to a shop having them pull the motor and send it to STM have them rebuild it and have a shop nearby...
Ok so I'm almost positive I have a leaking HG, the following symptoms meet my criteria: white smoke coming from exhaust that smells sweet, loosing coolant from coolant resevoir, took off radiator cap and have constant air bubbles. My car is at my buddies house and i can no longer keep it there...
Okay so I took off my OFH bracket because I thought I had stripped my oil feed line. Turns out I didn't, I just couldn't get it out until I took the bracket off.Anyway so I put the housing back and did not clean off all the old gasket I just put a new one on over it which left me with a huge...
Okay so I'm trying to install a B&M oil cooler but I'm not sure on what to do with the stock water lines, I don't want to loop them but would rather delete them completely. How would I do this? Also would I still need the water lines going to the turbo as well or could I delete them too? I plan...
Had really bad oil return and oil filter housing leaks, so i pulled my manifold and found that the last port has oil coming out of it. The other ports look fine though. How do i fix this?
Long story short I blew my E316g had it rebuilt to a FP68HTA and I'm putting it on tomorrow after work, also I am no longer using that Injen air intake and putting on a FP non-recirc intake with a 9" filter. Also I'm using a Perrin two port electronic boost controller. OK below are the pictures...
Ok so it's obvious my oil pressure sensor, and whats left of my oil feed line is leaking. But whats going on with the oil coming from above and below the exhaust manifold gasket? Also whats up with the oil return line, should i replace it or is it fine? There's oil every where even on the oil...
So i just received my fp intake pipe(non-recirculating), and I'm not to sure about what to do with the vacuum lines.I'm running a non recirculating BOV and i put a little filter on the line that runs to the left of the valve cover, but what about the one my mbc runs to, and the other hose coming...
Is the 38mm mvs vband/ o2 dump combo a good option for me to run on a evo 3 16g @27psi?I checked the psi chart and the wg tops out at 24 psi.Also whats the max psi a evo 3 16g can handle for boost, and what the wg actuator can handle?Supporting mods:Apexi N1 Exhaust, Punishment Racing...
Ok, so i have this kit from godspeed:http://www.godspeedproject.com/mitsubishi-eclipse-95-99-gst-gsx-intercooler-kit-version2?filter_name=gsx , and i dont have a way of mounting it to the brackets where to bumber reinforcer was, my quetion was where can i get a backet like the one in the picture...
So long story short i replaced my clutch and resurfaced the flywheel and i went to start the car and it slips out of 1st and almost outta 2nd, and when i downshift only from 3rd to 2nd it grinds really bad, come to the conclusion i need a tras or a rebuild any suggestions before i drop some cash?
GSX wont build boost but the car drives in low rpms ??? and went i step on the gas all the way it wont accelerate dont know if its a boost leak or what?? any tips in want to do would help ASAP :(
Just wondering if this sounds promising or should i just buy the genuine Evo III from extreme psi for $600????The turbo is all genuine except for the turbine housing. 350 shipped with Wastegate actuator as well. I acquired the housing from a guy sending his turbo to be converted to a 20g...
What turbo should / can i install with this intercooler? And would it be safe to install a bigger turbo without upgrading the fuel system first?MITSUBISHI ECLIPSE 95-99 GST GSX INTERCOOLER KIT VERSION2 [ICK-038] - $500.00 : GodSpeed Project, The Art of Performance
I just got my godspeed intercooler today and it didnt come with directions wondering if any noe can help me?:ohdamn:
MITSUBISHI ECLIPSE 95-99 GST GSX INTERCOOLER KIT VERSION2 [ICK-038] - $500.00 : GodSpeed Project, The Art of Performance