I had bent valves on my original head from jumped timing. So i replaced the head with a used one. After everything the turbo would boost very weak. The boost guage would lag before it goes up and its so weak. And also im blowing white smoke out the exhaust. Compression is good. No shaft play...

I want to get a aem uego wideband to tune with my safc. Do I have to weld In a hung or can I take out one of the stock o2 sensors and replace with the wideband o2? I have a stock ecu.

My gas pedal is floppy and doesnt open the throttle until its an inch off the floor. I has something to do with that little black box that the throttle cable goes through. Is there any way to fix it or do i have to get a new "black box".

I went and installed a new head after my last head jumped timing due to something getting stuck int the cam gear and now the car wont start. It cranks, but no start at all. I smell fuel, and theres only spark on the outer cylinders but wouldnt it still start on two cylinders at least? The cas...

Are the fender caps the same on a 95-96 eclipse than on a 97-99 eclipse. I cant tell from pics. Im getting 97-99 side skirts and I want to make sure they fit with my 95 fender caps.

I just hooked up my MBC. I got the car without one installed. Is the way its supposed to be installed? And to adjust it, looser is less boost and tighter is more boost correct? Its a TurboXS MBC. Ive searched around and some diagrams show the turbo being teed into it also but theres no fitting...

I just got my CEL code recently and I went to Autozone to check it out and it came out as1. P0136 - Heated oxygen sensor H02S sensor circuit fault 2. P0141 - Oxygen Sensor - Bank 1 sensor 2 (H02S12) heater performance 2. p1400 - Manifold differential pressure sensor circuitGot these...

My eclipse is refusing to start. It did it every once in a while and now it doesnt almost every time I try to start the car. When I turn the key I just hear one loud click sound and its not the repeated clicking sound you hear when your battery is dead-just one solid click and the the motor...

I just went to do my first oil change on my car today and i realized i got the wrong filter because I went to do it and the filter I had was a tiny filter and appears to be from a 2g or something and the real oil filter im supposed to use is huge and is located by the oil pan on what I think is...

So I bled my clutch by having someone pump the clutch 10 times and on the tenth time, they hold it and I crack the bleeder valve open and quickly shut it with the hose attached to it and the other end submerged in brake fluid.I repeated this method about 10 times and this is the 2nd time...

I have a 35w plug n play hid kit. It was on my accord nd worked fine.I switched it over to the 2g eclipse and it wont ignite or anything. I plug it back into the accord and it works. Both cars are 9006. And halogens work fine. what could be my problem?These are pics of the ballasts from...