Behold guys...it was the timing trigger plate...it was bent a bit smh

IQ685 thanks for the advice. What I meant to say was I bled the lifters and put them in dry, the second time around. But it made the same exact noise as the video that is linked to this thread. The oil was primed and I know theres oil pressure because once I removed everything the lifters were...

I get what you guys are saying, so I took it apart and checked the valves and nothing was bent. Nor was there any indication of the valves even kissing the pistons, everything looked good.The pistons are all nice and snug; The crank shaft rotates properly with no binding. I talked to a few techs...

Well I'm going to tear into it tonight, I'll keep you guys posted. But on another hand I watched some of jafros videos and he stressed to bleed lifters before install on an interference engine, otherwise you will bend valves, that's what he said. I also spoke to a local dsmer who has had plenty...

Well I will have to tear it apart and see what the damage is, my main thing is as long as its not the bottom end and its the valves I'm okay replacing it. I spent too much money for such a silly mistake. I turned the crank by hand before installing the motor into the car, there wasn't any...

The FPR doesn't have a line since it was a quick start up, if everything was well I would have connected everything fully. I checked compression twice on all cylinders, and they were the same. I know there is no way its lifter tick, my main questions are...is it bent valves hitting the top of...

Hey guys, I just finished building my 7 bolt. The bottom end and head were done and put together by a shop here in town. I put the motor together and I forgot to bleed the lifters. It started up right away after a few cranks. and heard a real loud tapping noise coming from the engine, I figured...

Hey guys, as the title states, does anyone have a spare fuel pump assembly for an awd 95-99, I'm in need of one, car has been down for a while. I need the sending unit not the pump...thanks guys

I'm also going but idk if my car will be ready by then, still waiting on some things to arrive.

Did you bleed the system right? you might have air in the lines since you changed things many times. Another thing, your clutch fork where it meets the slave, could have been put on too far from the slave so when you bled the system it had to have been bled a lot to make up for the distance the...

I figured it would be easier to post the CL link here than to post it all. Im willing to negotiate, I don't need it so lmkThermal Cat-Back DSM/Eclipse GS-T

That's awesome, I really appreciate it! After those two I still need some more parts but for now those two are what concern me right now.

That's pretty cool man, I'm still saving to get a tranny and tcase to get the awd swap going then to roll out with some of you guys

Leepen has some what of a point. The meets are pretty cool but I'd like to meet just DSM guys since we would have much more in common and I'm always down to learn, young grasshopper here.

What's up glen welcome

Absolutely not, the exhaust has a very nice deep throaty sound. I only had it cat back so it wasn't loud at normal speeds but at wot the exhaust sounded mean! I liked the pitch and tone a lot that's why I got it. Best way u can hear it is on utube and even those don't sound like it because it's...

I'm selling my 3" Thermal R&D cat-back exhaust for a 95-99 GST FWD Tharmal Cat-Back DSM

No it will not fit since they are bent for the GST. Pass the word to fellow DSMers, I'll post it up here first then other websites

damn...I didn't make it, how was the turn out? I know their line gets long, last time me and my girl went we had the one with the egg, it was so so...but their fries with the sauce are good!Any one want to buy a thermal cat-back ,GST!? its only a couple months old and in great condition

The eclipse is down for three main reasons, ps leak, bad alternator, and a build lol. The car was goin down fast so I decided to give it a rest and do things right. Thanks for the thought though.

DSM out of commision! Maybe I'll go out in another car...

My bad Chuck, I was talking about 4g64. Have any of you guys been out to the track...midnight?

I think I saw your car on the Evo vid, on lvrs

When? I went there months ago and it was dead, but I believe the time I went wasn't a good meet since it was freezing and all

damn man, like leepen said broken or being built. So what meets do you go to? I haven't been out since the last time ###u was at spring mt. and Wynn!

I believe Nevada is pretty lax on some stuff. Other than exhausts being too loud, and yes there are people here lol just hiding

Dang bro. I couldn't make it...how'd it go? My DSM was acting up...just did some upgrades.

I'm going for sure...just to spectate.

Yeah Steve and I went, a couple of civics and subi's rolled out for a bit. It was dead though...###u was off lol but hey at least some people went. Im going tonight to the one on spring mountain and Wynn I think. My girlfriend and I want burgers so lets meet!

I'm down also. @ project I got my blinker switch for my gs at a pic a part for 10 bucs from another mitsubishi. They are simple to install if I remember###u burger's schedule shows they are off this wednesday!

To gavin: pursuit is right as long as we can agree to meet...the more the better. Pursuit: sounds like a good idea, i'm game.

Yeah well just go out without ## dsm we need the knowledge lol.

I chose Sunday assuming most people don't work Sunday. And the only other meet I know at the same time as this would be the one on lakemead and 95 in that in n out and arbys. We can go there but there is mostly hondas nothing against them but trying a dsm meet. Any ideas?

Let's get a meet going on Sunday night. Down on ann and the 95 where the in n out and canes is at. 8 p.m

I tried getting it going too but nothing! We all know how the civics and jdm'ers have their sundays and thursdays at ###uburger! We need to do something like that also..I'm down for what ever, my car was down for a bit but ready to go now, plus its a lot easier to exchange knowledge in person...

Got it!

Hey guys I need a radiator for my gst asap. Let me know what and how much. Don't make it too expensive I need the car to go to work.

Hey guys, I have a seller who is selling a(Mitsubishi) Evo III 16g, Mishimoto M line FMIC with full custom hard piping and 2G install kit all for $800.00 brand new (all)! Any thoughts...good buy?

your best bet is C.L or mitsubishi dealer

I can't make it, but we should all be able to make it to the first one in July. Sound good?

Well guys, summer is here! I believe we should meet before a Midnight mayhem in a couple of weeks, that way some people can get their DSM's up and running.

Sure now we are getting somewhereHere's the thing guys, I want to meet where it's a fair distance for everyone. I'll post where I live and everyone else should too, unless it's not a problem for you then just post that, this way it's fair for everyone's pocket! I'm on the northeast side of...

Guys, we can't just keep on asking where are the meets, we need to make our own! I tried but no one replied or gave it a shot, but there's no reason to give up. So lets try again, I believe it would be easier if we could contact each other by phone or in person other wise we are just going to...

IFO begins at 11a.m so we should meet earlier than that if we want to either get there by 11 or before 11. Any suggestions? What I want to do is try to gather a couple DSMers and drive together to the event that way we all park together. I'm thinking breakfast at a fast food joint that way we...

Well guys the best thing I believe we can do for now is something this Sunday since IFO is on the 15th. How does that sound? Or hopefully we just bump into each other at IFO LOLHopefully everything goes as planned for you Bobby and you come back in August ready to build.Stay safe bro!

I agree buddy, I think we need to contact them all!

yeah for sure, we need more people to come back to the las vegas forum n order to get things done

Most likely not, I'll be going to the cruise on Sunday though.

Are you implying that you were a Honda guy? Actually there is a shop having a meet and cruise on the 1st! Vegas Speed Cruise & BBQ May 1st 2011 !!!!!!Well it might be too late for you, but it might be a good turn out.

I tried bud, nothing but Hondas which isn't all bad but I'd like to get a DSM crowd, go to lvrs.com maybe there will be more people there