Let’s see if we can find what’s left out there! Please use this thread to post any links found for the Planetary Gear Assembly for the auto trans! Please post year make and model the trans came from!These are getting very scarce out there and where trying to hunt them down!Face book links...
im looking to purchase a 3000gt rear diff for my auto build, and i cant find anything other then the 3.545 rear diff, does anybody know if i can swap the gears out to make it a 3.307 rear diff? (purchase 3.307 gears and internals from out sourcing)yea im gonna need a guru for this one lol
i was looking around for the oil pickup tube gasket (MD183240) for my 2g. and i found one from my local AutoZone via a google search, but it said "will not fit your vehicle" it sure did look right. i ordered one and can confirm its the right one.
this thread is just information if anybody needs...
Well this happened after the dyno the other day.
idle no sound, at about 1200rpm the tapping starts, then will go away at idle again?
So far I’ve change new rockers (cast) new lifters
Still has sound.
I’m trying to get some input before I rip the head off.
1g head on 2g block
Head work
+1/+1mm...
I was doing some browsing and i came across this video and these clips for the evo rocker arms for our motors!!
the clips almost look like clips you would find on a plastic shield on a car that a screw goes into
like this clip and its been drilled out!
I think I'm gonna try this and see if i can...
99 eclipse gsx awd automatic transmission,answer - both i have verified with the companies to be correct dimensions. i have ordered 2 from each place...
im redoing my trans this week and picked up a new separator plate. well i need a new aluminum plug that comes with the kit but don't have it, what else can i use or where can i find one?any thoughts of what i could use? maybe a piece of brass?
FIRST OFF! I would like to give a HUGE thanks to DSM tuners for supplying such a great platform for me to figure out how to build this car! legit I couldn't have done it without dsmtuners and some select members! weather it was wiring problems, engine building components, fuel system, engine...
this Sunday me and Brian are taking my car to the track to do a test and tune day, all dynos are booked till the end of July and August is too hot to run the car.
car has trouble getting to 4200 and building boost without nitrous,2g auto - basic mods list
transmission - shift kit - forced 4...
bottom line i cant afford a drive shaft shop driveshaft, 99 auto eclipse gsx with 300m t casei talked to my local driveshaft builder he can make me one for $400 (3.5" with u joints included)please provide part numbers and web links to where i can find these things1. what yoke do i need?
2...
Howdy yawl LOLA lot of information for our transmission (w4a33) can be found on the first link of the W4a33 wiki, 95, 96, 97, 98, 99 Mitsubishi Eclipse GSX/GST automatic 4wa33 upgrade guide/information (please add if you know of any extra parts/vendors/suppliers/guides)Information for the...
me and @Jacolu3 frame mounting his oil temp/oil pressure sensor for his haltech 1500, this can be done with all 1g, 2g dsm and in fact most cars too, (some require an oil filter sandwich plate) enjoy :thumb:
This is a digital dash program for obd2 vehicles. Is there anyway to get it to link up with ecmlink data to use it?
Realdash has custom coding capabilities and other ECU support such as mega squirt etc. the realdash app works with our obd2 port but due to the slow data transfer of the ECU the...
im looking to set up some sort of a protection parameter. weather its a fuel or boost cut. does ecmlink v3 full have this feature, i cant seem to find any information about it! THANKS
Here’s the plan idea
Using a 12v dimmer switch to control boost levels on the go.I have an electronic boost controller on ecmlink v3 full now.
I found this like if any body wants to chime in and help for a solution if there is one lol...
im remaking my 2g dsm harness from scratch, and im finding all the plugs and pins as a kit, but i dont need that. im reusing all the plugs and i need to know what type of pins i need (type-part numbers-websites)lets make this a good informational thread for others as well please. i will also...
hey guys! i made this video today, and i hope it may help or answer some questions on a proper nitrous setup for your eclipse. this setup is a simple NHRA approved setup! explaining the setup starts at 7min in! but please watch and enjoy the video! (quality still processing 4k 60fps) im using...
hey whats going on guysits racecar richie! i figured ide start this thread to help get my dsm based youtube going!
my channel is mainly about my 99 2g dsm build, but there are some other dsm tech videos on there as well!if anybody wants to see specific stuff, please comment here and ill try to...
i have ecmlink v3 full.
im hooking up a dry 50 shot on a button, to my throttle body this sunday using it to get up on the converter.question:
the activation button for the nitrous solenoid can i use that button to activate a second fuel map on ecmlink only when the button is pressed?
selling my seats, these seats where only mounted never used, there basically new. (fiber glass seats) saves 30 pounds over stock electric seats
comes with seat brackets, but not brackets from seat brackets to oem rails.$300 for both, local pickup only!!!!! unless you want to pay for shipping...
im looking at a set of rims for my drag build, will a +27 offset work with slicks? will these rims work?https://www.ebay.com/itm/Vision-571-Sport-Star-II-15x8-5x114-3-27-Black-Milled-Wheels-4-15-inch-Rims/392844016457?epid=17017003761&hash=item5b7753fb49:g:gIQAAOSwkhpe7EUw
okay okay, so heres the scoopi bought a borgwarner s463 t6 64mm/75mm 1.10 a/r. thinking it would produce what i needed for my power goal of 900+. after receiving the turbo i imminently swapped out the t6 for a t4 hot side.then i come to find out my turbo is only going to produce 66lb/min of...
after i mounted my fuel cell in the spare tire well, i then needed to seal it from the drivers compartment, there are 2 way to seal is off, 1. a firewall, or 2. a sealed box on top of the fuel cell with access panel. (as i made in the video)how to properly seal a fuel cell in a hatch back...
im looking to go fast, and looking at the nhra rules, i need, 30.1 flexplate shield?do i need a shatter shield for an auto? if so where can i find one?
so i want to use a digital dash for my drag car that displays some features.2g dsm
not looking to use with ecmlink, just wondering if the ecmlink chip has an effect on the data output so that i wouldn't/would be able to use a tablet with a dashboard app?is this anything out there that i can...
there is way to much mixed information about this swap, and its making my ADHD really fire up LOL:rolleyes::rolleyes:2g dsm auto, drag race build. (using a j racing alt. relocation kit)MY CAR IS GUTTED, NO DASH, NO IDIOT LIGHT.
I NEED HELP TO MAKE MAKE THIS ALT WORKdiagram below is 97-99...
this is for my build 2g 99 gsx.this wiring is fully custom. using my own relay and wiring. (except the 5in of leads i left on the ecu)a single speed rad fan that i want to run off a switch and the ecu at the same timei made this quick wiring diagram of what i think it should be.-1 IS...
I started a thread on an electrical issue i was having. And came across lots of 2g 95-96, 97-99 wiring information. But it was across many threads and websites. so i would like to put it all in one place for everybody!This is what i have so far!!!I would like this thread to contain as much...
for my build https://www.dsmtuners.com/threads/my-2g-dsm-second-build-this-ones-going-smoother.499369/looking to hard wire my ecu, tcui started to cut interior harness out, now the car wont start.i have easy access to all the wires, all loom and tape is off!!!please help me out!!!rich...
Located behind radio. By the 2 relays99 Gsx autogoogle has nothing on it. Just comes up as engine sensor.I’m working on my body wiring (deleting) for my race car build lol.
took this off my car for my build a while ago.
dosnt burn oil
no cracks
no leaks
normal shaft play
no stripped bolts or broken ones
bolt up and gotext/call me Rich 631-905-9432$150 obo plus paypal and shipping
***After item is sold. item will be deleted. all parts are OBO*** text/call me 631-905-9432 rich***prices are for parts only***shipping and paypal extra
__________________________________________________---aeromotive -8an fuel rail $60---2g throttle body with IACV block off plate and...
99 eclipse gsxi have a 10 gal in the spare tire well.what ohm's is the factory fuel level unit, so i can buy an aftermarket fuel level unit one for my fuel cell.what are the wires i should use? back of cluster or straight off the harness by the oem fuel pump plug/harnessi starter this...
i currently have a vrsf intercooler for my 2g build.i will be running 3" piping from turbo to the 2.5" intercooler inlet
i will be running 3" piping from the intercooler outlet to the throttle bodyquestion: can i cut off the 2.5" intercooler pipes on the intercooler? make holes larger and...
stock 1g dsm intake maifold with egr block off plate, used only as a mock upcopper over spray is whats on it, it can be wiped off$60 shipped includes paypal feesRich 631-905-9432 call/text
2g throttle body with idle air block off plate no leaks, comes with working throttle position sensor, bolt up and go$50 includes shipping and paypal feesRich 631-905-9432 call/text
can i daily a mechanical fuel pump?im currently in process of mount my aeromotive mechanical fuel pump, i think i saw some where that you need to run an extral cooler for the fuel if you wan to daily a high pressure mechanical fuel pump?is this true?
can i run a mechanical fuel pump daily...
my build! https://www.dsmtuners.com/threads/my-2g-dsm-second-build-this-ones-going-smoother.499369/any body wanna help with my build to sponsor me?! get logo on my car? offers? idk how these things work!just looking for a shop to rep me once my car is done! or a shop willing to help me...