Ok. The only things I have left to do. Aside from interior repairs is replace my clutch slave and line and get my fuel pump to power on. Issue is, I get no power to my fuel pump, it worked prior to arrival at my current destination and now nothing. It's the last thing holding me back from...

This is a actual question as I have been in the 2g world for a while and I'm being offered a running gst 1g for my non running 2g. Are the 90s not badged as a GST?

Okay guys, I just bought a rust free 2GA Talon TSi shell. I got to looking at the car and it's very clean and straight. No rust, no strut tower rust nothing.But the weird thing is the rear bumper fitment. It looks like the brackets aren't positioned correct or that the person who mounted it...

I have the chance to pick up a Eagle crank that's been turned .20 on mains and .10 on rod bearings, for cheap. Very cheap.My main question is, will the tolerances still be a tad loose after getting appropriate oversized bearings? Will this affect eventual end wear and output?I'm still...

Hey guys, the time has come for me to get into a shell I want, so I am selling my current GST Shell for 700 obo with FWD trans and everything but seats and engine harness as I need those still. I have the clean title in hand and will gladly tell you the car only has one ding, driver side, on the...

I've ran into a snag. What headgasket should I use?Should I use the 6 bolt hg, or the 7 bolt, I've searched thru google for hours on this and I just can't seem to get a answer. It's all stuff about the sensors that need replaced. I know about that. I just need to know (preferably from...

Hey guys, I know this has probably been beat to death, but I'm needing some second ideas.My friend bought a fairly nice 1GA TSi AWD a few days back and after I checked it over and found it has some weak (Ebay) boost controlled, decided to route it correctly, it ran fine afterwards.A few days...

So my car's tach is jumping, the Speedo reads fine, but the tach jumps from 1k to 5 until the car passes 5k in revs.It's not making much sense to me, maybe a crossed up ground? Or a faulty wire in the cluster? Could anyone help shed some light on this.

Hey guys.I have a pretty solid budget to buy a block. (400 max) I'm looking for a complete six bolt SHORTblock. SHORTBlock only. Complete as possible (timing components and such are a plus.I had my 7 bolt die, so I'm trying to finally do a 6 bolt like I have always wanted.Please contact me...

So basically, here's my issue. I have a very good body, decent running GST.However, I have one big downfall, I'm fairly sure the rings are gone. After extended idle, it smokes, and I mean smokes. The oil pressure and everything holds and the starts aren't hard. Just very smokey, oil smoke...

Alright, so the area leading to the wastegate flap on my friends 1G has a tear, looks terribly rough and I made the call and said that it was in poor health.His car's suffering a massive boost leak as well at this time (rough idle, car ran fine when maf was unplugged aside from the searching...

I'm having a hard time finding the car stereo adapter for my eclipse, I looked at WalMart and none of the stereo wiring adapters they had matched.Where can I get one at?

Went thru the search, nothing seemed the same to my particular issue, question.After changing the oil on my car today (old oil, previous owner ran something cheap)First fire up, the oil pressure jumped straight up to the first notch line, the normal after some driving so on. I let it...

So after driving today I decided to check my oil, just traded for this car not too long back, all it has is a 16G, Greddy BoV and a exhaust, and a ss oil feed line.Well, I noticed on shutdown I was getting knock/valve chatter like the oil pressure was suddenly gone or there wasn't enough oil...

Okay, so I just had my lateral control arms replaced and fixed the pesky 3/4" play I had.Now when I drive the car, under accel from 0-50, car seems fine, has a bit of a wobble/vibration, until I hit 55 then the car makes a VERY loud VERY obvious popping clunking noise that stays consistent...

I'm having this issue, builds 5lbs of total boost then brick walls, all further accel is totally not happening, I'm going to clean my maf, I have yet to run a boost leak test, yet I'm about to hardpipe and reline the car as is. So if a boost leak is present I'll find it then. (Hopefully, my MBC...

So my car had been leaking coolant slightly and i noticed some noise near the waterpump. Well I moved to a different time and I had to drive it all that way, I checked the coolant but when i got the car there, it started making a terrible waterpump noise.The car died, I'm thinking the...

Alright, so I was driving my car today after I woke up.I had my uncle replace my alt belt for me due to work constaints and it was all done correctly.Well going down the road I was driving fine then BAM, car dies.I pulled over inspected fuses. Engine fuse was blown. Uncle came and...

So my car has been for the past few days, been making a squeaking noise that gradually goes away. I didn't really think to much of it until recently. Just making a little noise that will go away around 3ish 3.5k.Well a groaning pop sound happened today when I was driving battery light jumped...

So like the title says, in the 3rd-4th gear transition, I accidentally slid it back into second (gearbox is new to me on this car), it over revved, but I immediately got into 4th and pulled over, manifold was hot but no grinding/slapping/knocking noise happened.Just concerned, felt better to...

Alright, I actually have two issues. First off, when my car idles on a steep grade (front end elevated above rest of car) the car will smoke. Oil smoke, but after leveled out and driven normally. No more smoke happens.2nd question. I have a strange idle issue. When the car is running it...

So you guys have been a big help, over the period of owning my DSM (4 months now) I've pulled the 7bolt in it and replaced it with a fresh 6 bolt motor.The old 7 bolt was beyond helping, previous owner blew the head gasket and let the plugs in, got some nasty surface rust from that. ECU had...

Like the title states, I just got this car running, after replacing the ECU because of the infamous leak issue.Car starts, runs just fine idles okay. Not excellent but it's not terrible.Here is my newest issue. I have a terrible grinding popping noise coming from the car while it's...

Alright guys, I've looked at the related thread and they have no base onto my situation.Alright, I bought a Talon TSi for 500 bucks, it ran the month before, but sat for a month and a half before I got it down to my town.Thing is, I can power the car onto the accessory position, then...

I'm by no means a newbie to forums I'm from a local TN forum and they run me this way to ask you guys.I bought a 93 Talon TSi, car is great, runs for 500 dollars, completely stock motor and just needing paint and hatch/sunroof seals.Although there is one big issue. The car won't engage...